Question about Husqvarna Garden

2 Answers

I require an ignition pick up coil to suit a model 61 Husqvarna chainsaw. Availability and cost?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,220 Answers

The IPL for a Husqvarna Chainsaw model 61 made on or before Feb 1980 lists pn-501 61 72-01 Here:
http://www.jackssmallengines.com/husqvarna_index.cfm?gclid=CNet4LC23JwCFRkpawod4iL-IQ
$64.84 plus shipping, they appaer to have at least 1 in stock.
HTH
Lou

I spent time and effort researching this for you. Please invest a little of your time and rate my solution.

Posted on Sep 06, 2009

Testimonial: "Thanks for your help, at that price it is possibly worth repairing."

  • dontbother10
    dontbother10 Sep 08, 2009

    A multimeter used on the on/off switch and connecting wiring might save you a few dollars.

    Lou

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 28 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Husqvarna 266se wont start


The 266 has a two peice ignition system, the electronic pack at the lefh hand side of the flywheel is nearly always the one that goes bad, the air gap should be set at 0.3mm, the coil on the right hand side is never usually at fault.

Oct 16, 2012 | Husqvarna Models 61-66, 266, 268, 272

1 Answer

I need a piston & clyinder for a husqvarna chain saw spurios parts might suit.


There are plenty of pirate parts on the web, they are not always the best, but are always much cheaper than original parts.

Sep 06, 2011 | Husqvarna Chainsaw Piston Kit for 61...

3 Answers

Husqvarna 14" chainsaw wont start. put new plug


Try a new spark plug.If still does not fire you have a bad ignition coil.

Nov 26, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

What is the clearance setting between the ignition coil and the flywheel on a model 61 chainsaw?


I set all my flywheel clearances to the thickness of a #100 sheet of sand paper. It has to be just able to slide back and forth to clean off the rust on the flywheel. Pull out the sandpaper blow out the dust and it works for me.

Jun 16, 2010 | Husqvarna Chain Saw 20" Bar

1 Answer

My Husquvarna Model 61 coils are not working I need a new coil where will i get an old chainsaw for spare parts for my machine now? I am in Sydney, Australia


check and search on E Bay mate, search for "Chainsawa' and "husquvarna", you should be able to pick up something cheap, also the coil from other Husquvarna models may fit, example, a 36 model coil, may fit a 61. A new coil is available from any mower and chainsaw shop, cost about $80.

May 31, 2010 | Husqvarna Chain Saw 20" Bar

1 Answer

New starter switch for a husky 61


The switch grounds the ignition coil through the spade connection to stop the engine. The switch should be mounted in a metal panel (ground). Hope this helps!

Apr 17, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

1 Answer

Wanted coil ignition module for Husqvarna 394xp chainsaw


I found an IPL for your saw here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter 394 as model number (no XPs, Es, just the numbers)
Serial number decode – for use with IPL
06 1500198
06 = year produced – 2006 (single digit before 2000)
15 = week produced - March
00198 = 198th unit Husky produced that week

I chose the 92-10. The coil and wire were manufactured as separate pieces. I found both at Jacks Small engines. It is interesting that the same ignition wire fits a Poulan at 1/2 the cost. About $86 for both pieces at Jacks. HTH
Lou

Oct 19, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

Coil for an '86 Husqvarna 61 Chain saw?


Here you are. There are liable to be several others listed on this page as well.

Apr 14, 2009 | Husqvarna Chain Saw 20" Bar

Not finding what you are looking for?
Garden Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...