Question about TruTech PLV16320 Television

1 Answer

My remote to the tv is not working i have replaced the batteries and we need to change the tv to channel 2 in order to watch cable tv but we cannot do that what can we do?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 108 Answers

First make sure the batteries are in correctly, if the batteries were corroded clean any acid from contacts. If acid leaked from the batteries it may have eaten into the remotes cicuit board. If all that is ok then you could turn on the cable box and with the menu button on the TV do an auto-program and it should lock in on channel two because it should be the only signal it picks up. If you can take your remote to a repair shop they my be able to test or fix it.
You can also try going to www.electronicadventure.us and scroll down to TruTech click on it and srcoll down to your model for part number and price.

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Using a samsung remote AA59-00312D on my samsung plano tv, how do i switch or change to watch on cable, its on auto mode now


The TV/AV button on the remote should work. If not, Check the remote control for its infra-red emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Oct 03, 2014 | Televison & Video

1 Answer

Why is my remote control not working despite changing the batteries.


Not sure if this will help but, I recently put an antenna on the roof of my house. I don't watch TV much but wanted to enjoy some TV, but my remote locked up and the side buttons on the TV wouldn't work either. I tried changing the battery, but no luck. There's a broadcast station 64.2 that is locking up TV's & remotes. Here's the fix that a TV repair co. gave me which did break the lock of the station 64.2.

1) unplug antenna (not roof but connection from TV to wall)
2) unplug and plug back in TV
3) find a way via remote or side buttons to scan channels
4) Go to Menu
5) EZ Setup
6) Channel Set Up-Scan Channels
7) Channel Memory
8) Digital Set Up
9) Turn Skip On for 64.2 (Delete this Channel)
10) Turn off TB
11) Hook Antenna back

You may have to play with the order to acheive the end result or figure out a way to delete 64.2, but during the process you will at least unlock from being stuck on 64.2.

Good Luck if this was the same issue!

Jul 14, 2014 | Audio Players & Recorders

1 Answer

Philips 19PS50S122 TV does not respond to remote control


Hello,
Please check your batteries in the tv remote as they appear to be weak or dead. You will need to find the cable remote's paper guide in order to properly program the cable remote so it can change channels, volume, and power functions on the tv set.
Good Luck!
Rich Lilja

Jan 05, 2014 | Televison & Video

1 Answer

How do i manually program my channels on older tv without a remote


Nothing you can do without the original remote. One cannot get into the setup pages. Replacement remotes usually don't work on this point either. They are missing this special setup button. In order to watch DVD, VCR, connect them with a SCART cable. When you switch on the player, the TV will detect this and go automaticaly to this input. If connected with RCA plugs, you can choose the input with the program Up/Dwn buttons on the TV set itself, going "lower" than channel 1.

Jan 04, 2014 | Philips Magnavox 20MT133S 20" TV

1 Answer

I have to go 2 inches to my LG televisionwith my


1. replace battery in the remote control
2. check if the remote works. Take any video camera (cell phone camera) and see trough it if the remote transmitter blinks when you press buttons.
3. if you use a cable/satellite remote control to change channels you should point it to a cable/satelite receiver not to a tv

Oct 14, 2013 | Bose V25 Theater System

2 Answers

Wharfedale LCD3210AF Television- Digital problems!


Well there is still a problem with the TV. I found that by unplugging the power cable that the digital channels worked. But, when I turned the TV on today the problem had returned, I had to take out the power cable again!

Feb 11, 2008 | Televison & Video

3 Answers

DS24205 TV INPUT PROBLEM


if you have a sky remote or know someone who does you could try programming it by using one of these codes, try them all one at a time

Sanyo 0159, 236, 073, 100, 064, 174, 185, 367, 039, 245, 246, 398, 241, 572, 583, 037, 132, 182, 244, 191

Jan 05, 2008 | Sanyo DS24205 24" TV

1 Answer

Can't find a channel to watch a DVD pre-recorded DVD


you should have a input select button on your remote. video 1 should be the front and video 2 should be the back. i had to buy 3 or 4 different universal remotes when mine messed up just to get the one button to change to change it to the inputs because there is no other way to change it to that with he buttons on the tv. kinda surprised that you didn't try and push that button yet. 

Aug 31, 2007 | Televison & Video

Not finding what you are looking for?
TruTech PLV16320 Television Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Jason Morris

Level 3 Expert

362 Answers

Are you a TruTech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...