samsungtxr2765 won't stay on more that 2 seconds!!! It gives the start up chime, then 2 sec of audio, then it shuts down. No picture. I pulled the cover and checked the fuse. fuse is ok ( of course) Can't get any online tech manuals.
please help.
John O
There is a part inside the TV that needs to be replaced. If the TV is
under warranty, call the manufacturer and they will arrange to have
your set repaired at little, or no cost to you.
If the TV is out of warranty, and you have the experience and you know
what you're doing, you can fix the unit yourself; first, you'll need to purchase the service manual from Samsung. Otherwise, if you've
never done anything like this type of repair before and you don't know
where to start, I suggest speaking with an experienced TV
repair-person.
If you take the TV to a repair shop for out of warranty repair, the
cost will likely be a minimum of $200 parts and labor. However,
be warned that the cost could be considerably higher.
Since some brands will pay for your repair even if you're out of warranty, you should
contact the manufacturer for your full range of options.
I hope I've provided you useful assistance and that this information
allows you to make an informed decision as to how to proceed from
here. Please be sure to vote on my response. I hope I've earned a
good rating from you today.
Please post a comment if you need
additional assistance so that I can help you further.
Was this helpful?
Yes
No
3 people thought this was helpful
Asker's Testimonial
"
Thank You very much for the great advice. You are the only one to respond to me for free. I appreciate that very much!
" - orrijo
In my Samsung CS-29M20SPQ S61B chassis ( Schematic Diagrams is there -...
(More)
In my Samsung CS-29M20SPQ S61B chassis ( Schematic Diagrams is there -
http://downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=ITSELF&CttFileID=288242&CDCttType=SM
%20%20%20&ModelType=C&ModelName=CS29M20SPNSKLG&VPath=SM/200504/20050407144315562_s61a_sdiag.pdf) raster are shifted to right-upper corner so the left and bottom arise blank space approximately 1cm width through all video input ( SCART-RGB/YCbCr/YPbPr, S-Video, Composite ) except for signal from inner tuner. It mostly well-marked when DVD playback UEMT ( Universal Electronic Measuring Table - Russion analog Indian Head or Lion Head )generated by MATHLAB and stored on CD as .jpg pictures with resolution from 640X480 to 1024x768. I supposed that it glitch DVD's FW module responsible for pictures output. Then i record .mpg clip composed from UEMT.bmp - selfsame outcome. Then i attach Saphire Radeon 9600 Pro S-Video output to TV's S-Video input and examine UEMT.bmp immediately from my computer - selfsame outcome. Using ATI Catalyst Control Center ( 2007.6320.2246.38712 ) i shift picture down as much as possible and enlarge picture size to the maximum - bottom blank space is all the same http://lill.front.ru/FTP/w_o_SCAN.PNG. But if use OVERSCAN mode in Catalyst Control Center - bottom blank space is
disappear, but picture's borders are exceed visible area and picture are truncated http://lill.front.ru/FTP/OVERSCAN.PNG
I compare input circuit from CS-29M20SPQ http://lill.front.ru/FTP/SAMSUNG.PNG with Micronas VSP9402A Data Sheet reference circuit http://lill.front.ru/FTP/VSP_9402A.PNG. Samsung very complicate input circuit. May be that isradix malarum ( the root of all evil ). Whether rational that complication.
I make apology for my bad English :-( .
TIA
In my Samsung CS-29M20SPQ S61B chassis ( Schematic Diagrams -...
(More)
In my Samsung CS-29M20SPQ S61B chassis ( Schematic Diagrams - http://downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=ITSELF&CttFileID=288242&CDCttType=SM%20%20%20&ModelType=C&ModelName=CS29M20SPNSKLG&VPath=SM/
200504/20050407144315562_s61a_sdiag.pdf ) raster are shifted to right-upper corner so the left and bottom arise blank space approximately 1cm width through all video input ( SCART-RGB/YCbCr/YPbPr, S-Video, Composite ) except for signal from inner tuner. It mostly well-marked when DVD playback UEMT ( Universal Electronic Measuring Table - Russion analog Indian Head or Lion Head ) generated by MATHLAB and stored on CD as .jpg pictures with resolution from 640X480 to 1024x768. I supposed that it glitch DVD's FW module responsible for pictures output. Then i record .mpg clip composed from UEMT.bmp - selfsame outcome. Then i attach Saphire Radeon 9600 Pro S-Video output to TV's S-Video input and examine UEMT.bmp
immediately from my computer - selfsame outcome. Using ATI Catalyst Control Center ( 2007.6320.2246.38712 ) i shift picture down as much as possible and enlarge picture size to the maximum - bottom blank space is all the same (http://lill.front.ru/FTP/w_o_SCAN.PNG) . But if use OVERSCAN mode in Catalyst Control Center - bottom blank space is disappear, but picture's borders are exceed visible area and picture are truncated (http://lill.front.ru/FTP/OVERSCAN.PNG ). I compare input circuit from CS-29M20SPQ ( http://lill.front.ru/FTP/SAMSUNG.PNG ) with Micronas VSP
9402A Data Sheet reference circuit ( http://lill.front.ru/FTP/VSP_9402A.PNG ). Samsung very complicate input circuit. May be that is radix malarum ( the root of all evil ). Whether rational that complication.
I make apology for my bad English :-( .
TIA