Question about Hitachi 50HDT50 50 in. Plasma Television

1 Answer

T.V. Loses its picture when it gets hot but I can still hear it

I have a 50'' Hitachi Plasma T.V. that loses its' picture after a few minutes but it seems that when I have it in a position where I have a fan blowing on it the tv works fine. Could this be because its hot? What can I do to repair the problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

Hitachi sets are prone to Power Supply Faults.

I think your PSU is getting too hot, then shutting down.

The better sets have Fans in them.

Either repalce the Power Suplly or put up with the fan.

It will however still fail in the end, one or more components are allready failing under stress / load.

Thanks

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Zenith Z50PT320 plasma tv. After a few minutes the picture turns very posterized and flickers. Should I replace the Main Logic CNTRL T-Con board?


There is no T'Con board to Plasma TVs. Flickering can be of many reasons. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Dec 09, 2016 | Zenith Televison & Video

1 Answer

Exmark lazer HP 19 Kawasaki 50" deck new PTO and new relays blades engage for 30 minutes then shut off engine on. After cooling will engage for 10 minutes then shut off


Engine valves need adjusting.
symptoms: starts ok, runs until engine reaches max temp loses power then stops. can't restart when hot. once restarted runs for a while stops again.

There is very little clerance in these valves and temperature alters the lenth by a few thou and the valve don't close fully losing compression, once cold the valves shrink back enough to create enough compression to start again.

Aug 13, 2015 | kawasaki Garden

1 Answer

I have a Hitachi. It will turn on with a good


replace Both of your STK ICs they are big black ICs will have part number on them example STK392-110 Call Mats for parts 1-800-628-1118

Nov 13, 2009 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

After usiong just a few minutes my blower loses


make sure your fuel mixture is correct.

Oct 19, 2009 | Garden

2 Answers

Hitachi P50H401 display problem


it is problem your TV high voltage unite(EHT)
change it by authorised service centre

Aug 28, 2009 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

50" Plasma turns off and back on without picture; audio stays on


Yes, you are correct. there are a few component issues on the power circuit board that will need to be replaced. the mani component will be the capacitors and transistors.if not repaired soon, this unit will completely stop working.

Mar 11, 2009 | Mitsubishi PD-5030 50 in. HDTV Plasma...

1 Answer

P50 VIZIO WHEN ON HDTV I GET SNOW


it's probably the Time Warner cable box that have issue and not the TV. Try using a DVD player and test the same input, it should work fine.

Nov 15, 2008 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Color fades


HELLO. it sound's like you have a cold solder problem.!!! what that mean's is that when the set get hot .!!! it lose's it's contack.!!! you might try going over the chassis .!!! soldering the conteck's.!!! with a low watt. solder gun.!!! not over 40 watt's.!!! and use 40/60 rosin core solder.!!! hope this help's you .!!! "GOOD LUCK"

Mar 14, 2008 | Hitachi 50UX58B 50" Rear Projection...

2 Answers

Hitachi 50" plasma no picture


how do i fix p50h401 blue light no picture and sound

Feb 07, 2008 | Hitachi P50H401 50 in. Plasma HDTV

Not finding what you are looking for?
Hitachi 50HDT50 50 in. Plasma Television Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...