I have lost the printer cable for my HP psc 750 all in one.
From searching the web it looks like a usb A to usb B cable, but i dont know if this is correct.
Also i cant be sure which ends of the missing cable are male or female.
I have this same printer PSC 750 and I will tell you what I see on this cable.
One end is a standard USB cable as you know and the other end is a square I guess femail thing about as big around as an ink pen. I would have to get over to some photo of a USB B cable to verify what you call it. Yes at this link is a photo of what I have as the original cable except mine is black(who cares?). This one at this site is 12 bucks....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What cable do you not have? Tha power cord or the USB cable? A USB cable can be purchased at any office supply store...Staples, Office Max, etc. If it is the power cord you need you amy have to do a search on Google to find the correct one. One such site is PSC Power Cords
The software can be obtained at HP support. Here is a link:
Select Software & Driver Downloads. Then select your operating system. A list of available software will appear. Many will have a link to order a CD if you desire one, but you can download the software for free.
It's a bad power supply. go to http://www.ebay.com and search for HP PSC 750 and there are numerous of new power supplies for the printer. Or, the wiring is dead inside the printer. Go to http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01321436&lc=en&dlc=en&cc=us&product=57769&lang=en
OK I'll Give you three steps to try and then I'll give you a recommendation
With the usb cable connected unplug the power cable from the printer while it is on and wait for 30 seconds now unplug the power cable from the wall jack and then replug the power cable from the walljack and then to the printer. now check if your printer gives the same error.
try another usb cable for the printer
Hold the usb cable with your hand and see if the status changes .If it doesn't
Its the usb port of your printer gone bad. Its a nice printer hardly any problems to Hp customers at all,but unfortunately well you know what Im gonna say.
Anyway call in to hp at 1800-474-6836 and directly ask for an upgrade nothing else and you will get a 50% discount on an all In one printer. with a years hardware and software problems covered. you can extend this plan on the spot. Now If you face any hardware or software issues then your printer will be replaced free of cost for hardware problems. If its a software issue the hp tech will take a remote access of your computer and make your printer work perfectly.
you can get it at any computer assessories shop or at any electronics shops who keeps computer spare parts .there r two wires you require for starting the printer
1)the usb wire(the connecting wire between the computer and the printer)
2)the power cord(its a three pin wire connecting to the main outlet).
and the last and the main thing the adaptor in which you connect the power cord wire it normally in built if not in built you can check out this link for any types of wire assessories they provide you
with a service at your place www.radioshack.com