Question about Creative Labs ZEN V Plus MP3 Player

1 Answer

I have forgotten the password for the Restrict Volume button

I set a password for my Zen Stone and promptly forgotten it. I have tried to reset my player but I have no idea what to do next.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 88 Answers

Hi

Please fallow your desired step as fallow and then check

I have forgotten the password for the Restrict Vol - c367d7d.jpg

Step1

Clean Up
: Scans the player and removes invalid links from its music library.
Does not affect music files themselves.

Step2

Format (All) :
Erases all content!
Save a copy of your player's content before formatting.


Step3

Reload OS/ Firmware: Caution! Erases your player's firmware.
DO NOT select the Reload Firmware option unless you have access to a PC and you have downloaded the necessary firmware to install.

Step4
Reboots the device.


Hope it will work

Kindly Rate !



Thanks








Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to off restrict volume


Hi Cherry - that's not too hard.

Restricting volume (password protected) is done through Creative Media Lite software.
How to use Creative Media Lite

After protecting the Volume Restriction settings with a password, the same password is required for subsequent changes.

If you forget your password, reinstall your ZEN Neeon 2 firmware. You can download it from Creative Worldwide Support ZEN Neeon 2

Jan 21, 2014 | Creative Labs ZEN Neeon 2 MP3 Player

1 Answer

I dont know hw to turn my zen stone off


try these
1.press and hold the play button
2. press the reset button
3. take out the battery(if possible)
4. leave it on and let the battery run out

Aug 20, 2009 | Creative Labs ZEN Stone MP3 Player

2 Answers

How to reset code for powering off restrict volume on my creative zen neeon 2


Here is a quicker solution if you have already chosen Europe?

Well, thanks to my investigations I have found there is a solution. Pressing reset will not work and installing new f/w is a pain.

Instead, open your S9 system folder, and simply delete the "PARAM" file. Power off. Power up. (There is no need to change firmware at all).

You are back at the original screen. 1. Choose your language. 2. Next DO NOT CHOOSE THE EUROPE setting. 3. Third, choose your radio setting - any will do.

Jul 19, 2009 | Creative Labs ZEN V Plus MP3 Player

1 Answer

Cannot format


From: http://www.anythingbutipod.com/forum/showthread.php?t=31068
  1. Connect the player to the computer.
  2. Double-click the My Computer icon on the Desktop.
    If the My Computer icon is not on the Desktop, click Start and My Computer.
    If the My Computer icon is not in the Start Menu, right-click the Start button and click Explore.
  3. Locate and right-click the disk drive listed as ZEN Stone or ZEN Stone Plus followed by a drive letter.
  4. Select Format.... zen_stone_not_playing_3.jpg File Context Menu Click to enlarge
  5. Ensure the File system is set to FAT or FAT 32. Leave the remaining options set to the defaults. zen_stone_not_playing.jpg
  6. Click Start. zen_stone_not_playing_2.jpg
  7. Re-transfer the files back to the computer.
If resetting or formatting doesn't help, you could also try reloading the firmware. Connect the Stone, download the firmware, and then execute the the firmware file.

1. With the Stone disconnected, download and install the Player Recovery Device drivers.
2. Download the Stone's firmware from Creative's site.
3. Boot up the Stone as a Player Recovery Device (also see below).
4. Connect the Stone to the computer and let it load the driver (see here).
5. Execute the downloaded firmware file or Creative's Recovery Tool.

Sometimes, in order to install the firmware, the Stone needs to be connected as a Recovery Device:

1. Make sure the Stone is disconnected and turned off.
2. Press and hold the volume down button.
3. Continue to hold the button until you have performed Steps 4 through 6. If you accidentally release the button, start the procedure again.
4. Press and hold the Power/Pause/Play button
5. Hit the reset button
6. Connect your player to your computer's USB port and after 5 seconds, release both buttons.
7. Once the Stone is recognized, execute the old firmware file.
Hope this helps, and have a nice day! ^_^

Jul 11, 2009 | Creative Technology ZEN Stone MP3 Player

1 Answer

Volume too low on zen


Try going to System>Audio Settings>Restrict Volume on your ZEN. This is a password protected feature for parental controls i guess... If this doesn't work, get a hearing aid : )

Jan 28, 2009 | Creative Labs Zen Digital Media Player

1 Answer

My zen stone stays on a solid green light


Just tried this on a zen stone with speaker and worked. Connect your zen stone to your computer. When the green light is on, use a paper clip and press and hold the reset button (small hole on the headphone jack side). The green light should turn off. Wait a bit and it should start blinking to indicate it is now charging. Note: This reset only worked when I had it connected to the computer.

Hope it works for you too.

Ken

Nov 22, 2008 | Creative Labs ZEN Stone MP3 Player

7 Answers

Zen stone mp3 player not switching on


Mine was also completely dead, with the reset doing nothing! I held the vol+ and the Play button at the same time and it was good to go. Holding just the play button or the vol+ button didnt acheive anything. But as I held both together, It came back to life instantly and I havent had any problems with it (for a week so far).

May 08, 2008 | Creative Labs ZEN V Plus MP3 Player

3 Answers

Forgot password on the restrict volume


I have solution !!! You must turn up player!!!
then TURN ON WHILE HOPLDING PLAY BUTTON !!!!!!!

Then a screen goes on !!!!
You must choose CLEAN UP THEN REBOOT !!!


THEN IF IT DONT WORKED!!
THEN YOU NEED TO CHOOSE CLEAN UP THEN FORMAT THEN REBOOT !!!!



THATS ALL

BY DABDAB10

Jan 16, 2008 | Creative Labs ZEN V Plus MP3 Player

2 Answers

Forgot password


push and hold the power button and at the same time prss the play button....a system recovery window eill pop up and select the first optiom "clean up" then turn it off and on again and its done!
:D

Jan 10, 2008 | Creative Labs ZEN V Plus MP3 Player

Not finding what you are looking for?
Creative Labs ZEN V Plus MP3 Player Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

618 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...