Question about Cobra Radio Communications

2 Answers

What is different about Galaxy 4-pin mic wiring? My Astatic desk mics work great on my two Galaxy radios but won't allow recieve audio on my other various radios that are also wired for "standard" 4-pin.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a cobra mic i am trying to wire to a 4 pin galaxy saturn. What wires do i use and where do they go. i gava blue, red, white, black and ground (copper colored). i cant find any help anywhere HELP!!!!

Posted on May 23, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Not all 4-pin radios are wired alike on the inside,you did not say what brand the other
radio's were.
Astatic makes a mic wireing book for almost
all C.B. radios.
Maybe this helped.

Posted on Sep 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you help need the wiring for astatic silver eagle mic to wire up to the yeasu ft-757-gx radio


The best info I can find iis
radio mic
pin5 blue mic ground
pin6 red ptt
pin7 screen
pin 8 white mic

Jan 30, 2015 | Astatic Radio Communications

1 Answer

I'm trying to wire a galaxy desk mic to a cobra 200 10 meter mobile


  • The Galaxy desk mic (power mic) is already wired four pin and the Cobra 200 is a 4 pin already as well. So unless someone has messed with them the mic will plug right up to the radio as is.

  • But if someone has repined the mic then follow the pinout I listed below to get it rewired for the Cobra 200
  1. Pin #1 on mic connector - Black wire.
  2. Pin #2 on mic connector - White wire.
  3. Pin #3 on the mic connector - Blue wire.
  4. Pin #4 on the mic connector - Red wire.

  • If you look on the end of the mic connector it will have the imprint of the number for each pin on the mic.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Oct 02, 2011 | Cobra Radio Communications

1 Answer

I have a general lee cb with a 4-pin standard mic. the wires in my mic cord broke at the plug. does wnyone know how to wire this type of mic back and what color wires go to the correct pin?there are 6...


Here are the Pin outs for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally the Cobra pin out is standard for most radios.

Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)

Astatic - (4 wire) 1- Shield 2- White 3- Red 4- Black

Astatic - (6 wire) 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500, Cobra, CA Series - 1- Shield & Black 2- Red 3- White 4- Blue

Galaxy DC-521S - (4 wire) 1- Shield 2- Yellow 3- Red 4- Black

Galaxy CB-660EI - 1- Shield & Black 2- White 3- Red 4- Blue

Sadelta - 1- Shield 2- White 3- Brown 4- Green

Turner - 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC

Jul 12, 2011 | Magnum DeltaForce CB Radio

1 Answer

I need the wiring for the mic


Hello,
Here is the wire diagram for several common mics in relation to a 4 pin CB. Most recent 4 pin CB's such as Midland, Cobra, Connex, Uniden, etc can use 4 pin mics. The wiring is actually depending on the mic rather than the CB so long as the CB's are 4 pin as well. Once you go back to late 80's the 4 pin design was a little different. Anything new it is simpler.
Stock Mic 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)
Astatic - 4 wire 1- Shield 2- White 3- Red 4- Black
static - 6 wire 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500 Cobra CA Series 1- Shield & Black 2- Red 3- White 4- Blue
Galaxy DC-521S - 4 wire 1- Shield 2- Yellow 3- Red 4- Black
Galaxy CB-660EI 1- Shield & Black 2- White 3- Red 4- Blue
Sadelta 1- Shield 2- White 3- Brown 4- Green
Turner RK56 Road King 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC
Regards, Tony

Apr 07, 2011 | Connex Radio Communications

1 Answer

Im trying to wire a astatic d104 m6b to a galaxy 949 mobile can you give a color code for what color wire goes were?i have black white red blue and a bare wire thank you.


This works for any mic.
dont worry about color codes. look at the switches.. there will be a common on both poles of the d104.. those need to be tied together to grnd. pin 1 on mic . the others d104 on n/c side is your rx. pin 4... the n/o one will be your tx pin 3 the other n/o will be audio and will have a wire from the mic element also on that pole of the switch. pin 2..

Sep 25, 2010 | Galaxy Radios DX-949 40-Channels Base CB...

1 Answer

Mike wire color coat.


1 is shield (and may also need blue for astatic mic or red for turner mic)
2 is audio (white on astatic and turner mics)
3 is Transmit (Red on astatic mic or blue on turner mic)
4 is receive (Black on both astatic and turner mics)
If your mic isn't an astatic or turner, email me with what mic that you have and I'll try to help. N1PTA@msn.com

Mar 18, 2010 | Radio Communications

5 Answers

Cb mic wiring


I have a browning golden eagle mark II. It has a two pin mic plug. I would like to hook up a astatic power mic to it. Anyone have an answer?

Oct 07, 2008 | Magnum DeltaForce CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Steve

Level 3 Expert

3287 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...