Question about Samsung HCM422W 42" Rear Projection Television

1 Answer

Hcm422w It went out, no power and no sound. Turn it on and the red light blicks 10 time and turns off. Need a deflection broad part# CX801S !!

Posted by on

  • 1 more comment 
  • westside97 Jan 19, 2008

    I bought it 5 years ago and it had been great. Now when I tried to turn it on, the red light either stays on or blinks many times, but no picture appears. I tried unplug it but to now avail. Clearly something need to be replaced. Just not sure it's worth the while.

  • rai_exe
    rai_exe Feb 01, 2008

    one day i was just watching tv and it shuts off, the power comes on and off a bunch of times and when it does stay on, theres a squigly horizontal white line through the middle and theres no sound or picture or anything.

  • rayaltx Jun 26, 2008

    I hv this same problem on my 6yr old Samsung HCM422W reported by westside97. No picture or sound, just the blinking red light when I plug it on or when I press something on the remote. Has any one with this same problem on this TV been fixed or had a solution? or is it time to throw this out and get a flat screen lcd?

    Thanks for any help.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 40 Answers

Your need a PSU/Deflection board..or possibly convergence amps.................

Posted on Feb 03, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a tv Sony Trinitron XBR. It does not turn on; the LED red light blinks 7 times.

Common problem on those. It has deflection stopped. I.C. on deflection board. Need shop to repair.

Nov 23, 2014 | Sony FD Trinitron WEGA KV-34XBR800 34" TV

1 Answer

Tv turn on power light blicks three time an shuts off nothing after that

The deflection board is what causes that with your model. You need the PSB260 deflection board available at listed under RCA circuyit boards. the board has a 6 month warranty and comes with installation instructions.

Jun 06, 2011 | RCA R52WH73 Projection Television

1 Answer

When the tv is turned on i hear a click the red light turns on then another click and the red light blicks. is there a reset

Count the number times the red light blinks this is an indication of the error code as to what the probem is, if it blinks 10 times then this is a power supply failure.

May 21, 2011 | Panasonic TCP42C2 42 in TV

1 Answer

I have KDS-50A2000 Sony SXRD Projection TV. Serial #9028985. It was working fine then a few days ago I went to turn it on and the red power light was blinking 4 times and repeat... I then opened the lamp...

hello, this can cause the red power light to flash 3 time also if the lamp cover is not fitted securely this can also cause the light to flash 3 times 4 times, Diagnosis: Vertical deflection stopped. Possible causes: +- 15V is not supplied. (D board), IC8003 is faulty. (A board) Symptoms of the problem: TV has entered standby state after horizontal raster, Vertical deflection pulse is stopped, Power line is shorted or power supply is stopped hope it helps


Jan 03, 2011 | Sony KDS-R60XBR1 60" Projection HDTV

2 Answers

Sony LCD KF-50WE610 no picture-red light blinking

3 times standby red light blinking shows that lamp cover has not been placed back properly after lamp replacement.
Make sure lamp cover, (the first thing that you removed to replace lamp in tv) is fixed securely then turn tv On.

Jul 30, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Timer light is blicking off and on

if the sound is working you need to replace the lamp and reset the lamp use hours.

Jul 07, 2009 | Televison & Video

2 Answers

My TV wont stay on....

it sounds more lke the power supply is gone than a timer being stuck

Oct 25, 2008 | Samsung HCM422W 42" Rear Projection...

Not finding what you are looking for?
Samsung HCM422W 42" Rear Projection Television Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides