Question about Hunter 52" Ceiling Fan With Light And Remote Control

1 Answer

Reprograming Ceiling fan remotes

I have two remotes with the sme settings, How do I reprogram so that I don't turn on both at the same time. They are Hunter Ceiling fans

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 34 Answers

You need to find the dip switches or jumper blocks on posts on the remote and on the fan. As for the receiver, usually they are in a separate unit that slides into the hanger bracket that attaches to the ceiling inside the decorative canopy cover, otherwise they should be visible if you are looking down onto the top of the motor without having to open any kind of access. And as for the remote, you should be able to access them through the battery compartment. just make sure the codes match.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jerry_612d8419f8984578

Posted on Sep 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My harbor breeze ceiling fan remote has dip switches inside, but no reset or program switch. How do I attempt to reprogram?


The dip switches in the remote must match the dip switches it the receiver inside the fan motor. You can set them anyway you like as long as both are the same.

Sep 26, 2015 | Dryers

1 Answer

Hardwired ceiling fan turned off by itself and stopped responding to remote control, but the light turns on/off.


I've had problems with Minka Aire also. You might need a new receiver. Call Minka @ 1-800-307-3267 and talk to someone in tech dept.. Should be a one year warranty on the receiver.

Aug 17, 2015 | Minka Lavery Minka Aire F888-BNW...

1 Answer

How to reprogram for remotecontrol to the hopper for dish network


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Sep 16, 2014 | Televison & Video

1 Answer

How to reprogram remote for liberty fan


It was an add-on remote so it really depends on the receiver. Locate the receiver, probably in the canopy cover at the ceiling, and see if it has 4-5 dip switches. If so, just change the settings by changing one of them, by pushing it up or down. Now, open the battery compartment of your transmitter and match the setting you just did to the receiver. BOTH have to be set on the same frequency.

Aug 16, 2014 | Quorum Liberty 4952544 Ceiling Fan

2 Answers

Need to program Hampton Bay Ceiling fan remote control CHO88T7030T, HELP!


Change the battery. This is the first step when troubleshooting a ceiling fan remote. The easiest fix to any remote control problem begins with battery replacement. A 9-volt battery is needed to operate all Hampton Bay ceiling fan remotes.

Check the light switch used for the ceiling fan. The light switch found on the wall must be in the "on" position. This allows the ceiling fan to be operated by remote control

Re-program your remote. If battery replacement fails to get your remote working again, try to reprogram the remote. Open the battery cover you will see 4 dip switches. These switches must be set to the same position as the receiver on the fan. Use the screw driver to move the dip switches either up or down.

Follow the previous step to change the frequency if the ceiling fan is randomly turning on or off. Other electronic devices such as garage door openers can interfere with the ceiling fans receiver, causing it to randomly turn on or off.



Sep 10, 2011 | Televison & Video

1 Answer

Ceiling fan with remote control stopped working suddenly, ruled out battery for remote control, because I changed a new one, ruled out circuit since everything is working, I don't have a pull on the...


with Hampton Fans,, normally if the remote is good with a known good battery , and it quits working,, its the remote receiver, not the actual remote that goes bad. you can contact these guys I heard they have the part you need http://www.ceiling-fans-n-more.com/hampton-bay-ceiling-fan-parts.php

Sep 07, 2011 | Hampton Bay 24750 Huntington III Ceiling...

1 Answer

Remote for Ceiling Fan (Model: AC 552 AL) no longer works. I changed out batteries and still does not work


Maybe it needs to be reprogrammed after new batteries. What is the model number on the remote, please?

Jul 12, 2010 | Hunter 52" Ceiling Fan With Light And...

2 Answers

Power went out and now ceiling fan won't work


Before you try all of that try the on/off switch, I tried holding down the light switch on the remote and turning the on/off back and forth several times and then the light came on... it is very tricky, but I knew my battery was good, and the fan worked before the power went out and the dip switches did not need reset or changed. I tried many different combinations so I am not sure what tripped it up, but try that before changing anything or pulling the fan cover off. Best of Luck

Sep 07, 2009 | Hampton Bay Dryers

1 Answer

Is not turn it on again when i press manually, not from remote control, on control parent


Try unplugging and replugging,then reprograming the remote. Also try removing the batteries from the remote, holding a button down to drain the power, reinstalling the batteries, and reprogramming the remote.

Aug 11, 2009 | RCA 32V550T 32" TV

Not finding what you are looking for?
Dryers Logo

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

Paul Bade

Level 3 Expert

1606 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14417 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...