Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

Mitsubishi dlp does not get picture

I have a mitsubishi dlp tv model wd 52725. i replaced the lamp bulb about 2 months ago. when i hit the power on button the tv sound comes on but no picture. the tv will stay on for 2 minutes or so with no picture and then power off and the lamp button on the front of the tv turns orange. i have to hitthe reset button to try again. it does this over and over. every once in a while it get a picture, maybe after 8-10 tries of getting the orange lamp light and then resetting. the lamp is practically brand new so i cant see that being the problem. any help would be appreciated.

Posted by on

  • 8 more comments 
  • fanofusc Dec 08, 2007

    I have almost the same problem except sometimes the picture will come on and sometimes only audio. Hit the reset and everything returns to normal until a day or 2 later. I am on my 2nd lamp and it is only couple months old as well.......very coincidental

  • chadie Dec 10, 2007

    The red "lamp" light lit, so I replaced the lamp. The TV turns on, a low lighting appears on the screen, then goes out, and then the red "lamp" light comes back on.

  • Bad Diamond Dec 10, 2007

    I have a similar problem. Dark screen with sound and the power button illuminated. I opened the bulb compartment, looked at the bulb, and everything seemed fine. Put the bulb back in and the television worked. Turn the TV off, and came back later to the same problem. I thought that simply pulling the pull on the unit would reset it, however that was not the case. After resetting the power, unit did the same thing, dark screen with sound. Opened up the bulb compartment again , pulled the bulb, installed the bulb and everything worked fine. Looking for help!

  • springugh Dec 11, 2007

    Same problem here. lamp failed in less than 2 years... Tweeter was NO help and very short... replaced the lamp... works if I unplug and plug back in after a few minutes. If turned off, will not come on the next time. Plug for the cartridge and seating looks fine!?!?!?!?! Wish I never bought it.

  • Anonymous Dec 11, 2007

    I replaced the bulb last week, and the TV came on fine afteri plugged it back in, after i powered it off however and i go to turn it on, it acts like it wants to power up, but then after a couple of minutes the amber/orange ligh comes on, now if i take the bulb out that i replaced it mut reset something and the TV will work fine, but when i turn it off I have the same problem, I heard I need a code to repair the problem to reset the board and ishould be fine, is this correct? I will keep searching until i find the solution unless u can help, I hit the Input and menu button at the same time, and I'm getting three flashes then four, so 34, is there a solution to this number, i Have model number WD 52327...

  • Bacall Dec 12, 2007

    I have the same problem. No picture on an 18 month old tv. I replaced the lamp and get the same thing, no picture and the light on under lamp. I have tried the reset button to no avail. I see where ctf1800 says the plug that connects underneath is not connecting right and that you have to seat it correctly, but am not sure where he means. Does he mean the plug underneath the TV, underneath the bulb, or somewhere else? Help please!

  • Anonymous Mar 19, 2014

    I see what seems to be a scratch on the bulb. Could this be causing the line through the picture?

  • Anonymous Mar 23, 2014

    WE HAD THE DIP CHIP REPALCED ABOUT 2 MONTHS AGO AND WERE TOLD THAT THE LAMP WOULD POSSIBLY BE THE NEXT THING NEEDED TO BE REPLACED COULD THIS BE THE PROBLEM?

  • Anonymous Mar 23, 2014

    WE HAD THE DIP CHIP REPLACED ABOUT 2 MONTHS AGO AND WE WERE TOLD THAT THE NEXT THING WOULD BE THE LAMP THAT MIGHT NEED TO BE REPLACED COULD THIS BE THE PROBLEM?

  • Anonymous Mar 25, 2014

    Picture flashes and little color

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

The plug the connects underneath is not connecting right you have to get at the plug and seat it correctly

Posted on Dec 08, 2007

  • Cary Farah
    Cary Farah Dec 08, 2007

    if you need more info let me know and i can look it up.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitzibushi Tv model WD-65638 no picture no sound


Youre lamp has failed. you need to replace the lamp. Refer to the manual to see how to replace it. It only requires 2 or 3 screws on the back to be removed. Please check the manual.
You need a 915B441001 lamp. 915B441001 PVIP Mitsubishi DLP TV Bulbs

Feb 25, 2015 | Mitsubishi Televison & Video

1 Answer

Posted a short while ago but have more information Mitsubishi DLP WD 52725 - sound no picture - blinks 3 short times and 1 long time


have you checked the lamp? with those models they will power up and if the lamp is bad you can hear audio until the tv shuts off. the lamp is located in the front behind the speaker grill assembly. if the "status" light is blinking then you are having a fan failure if the "lamp" light is on then check the lamp like i listed above.

Jan 06, 2011 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

No display or sound on Mitsubishi WD-52725


This is a DLP They have issues with the color wheel, the winding sound could be from this color wheel. If it stops spinning it will cause the tv to shut down. DLP is a mechanical display process. If you are handy and understand electronics you could replace this yourself. If not i would let a tech handle it.

Sep 01, 2009 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Green diagonal lines across picture on Mitsubishi WD-52725 TV


If the lamp light turns red and the set wont power up put the V26 Power repair kit in and that should take care of it. The kit contains the capacitors and detailed instructions on CD

Jul 22, 2009 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Buzzing noise from Mitsubishi DLP WD-52327 after replacing bulb


Did your replace lamp come on the screen or did you lose picture? Just because the LED indicator suggest replace lamp it doesn't mean it needs it. If your pix was dull or loss of brightness then replace it, if not then just reset your lamp timer, check your owners manual for instructions.

Feb 14, 2009 | Mitsubishi WD-52327 52" Rear Projection...

1 Answer

Status light stays on


I have a 52inch mitsubishi dlp model ws-52725,I turn on the tv and the green light is plinking I have this befor and had to replace the module at a coat of 600.00 that was 2 years ago .I have done all the necessary steps,light still plinking.what do I have to do now ?My last mitsubishi I had for 15 years with no problem.Its mitsubishi going down hill. Thank you PS there any help any where ?


l#wd52725

Nov 22, 2008 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Sound but no picture on my HD-52725 (slightly over 1 yr old). The TV menu DOES come up but other than that, it's just a blank screen. I replaced the lamp about 3 weeks ago. It was working fine yesterday...


The new bulb that went bad I purchased for less than $130.00 from http://www.Discount-Merchant.com/ . When I called them they immediatly sent me a new bulb free. Their number is 1-619-710-2637. A very good coumpany to do business with. They are also considering selling ballast for dlp TV's for around $200.00. The TV repair place that I have been going to told me that maybe the ballast made the bulb go out and it would cost between $600.00 and 800.00 to have them fix it. My TV is a Mitsubishi WD52725. dodger1

Nov 20, 2006 | Mitsubishi WD-52725 52". Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1230 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...