Question about Canon MVX200 Mini DV Digital Camcorder

1 Answer

Canon mvx200 continually tells me to eject tape and automatic ejection sticking

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: canon mvx200 - Canon MVX200 Mini DV Digital Camcorder Video Cameras

My pc can not detected my camecorder mvx200

Posted on Jul 24, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Canon xl2 tape won't eject

This is a known problem.
Broken loading gear, Example: canon zr65 replace broken gear
Canon XL2 and ZR65 uses same tape drive system.

Feb 20, 2015 | Canon XL2 Mini DV Digital Camcorder

1 Answer

Canon GL1 message to eject tape... I want to transfer it to puter. any suggestions?

Canon GL1 was working fine last night,now it want do ANYTHING today,want power up or anything,want even eject tape when I push eject button. Any suggestions?

Jun 25, 2010 | Canon GL1 Mini DV Digital Camcorder

1 Answer

Canon es55 video camera. Everytime I put a tape in, it ejects it. If I take the tape out, and close the door,it will will automatically close and stay closed

Everytime I put a tape in, it ejects it. If I take the tape out, and close the door,it will will automatically close and stay closed

Nov 21, 2009 | Canon ES970 Camcorder

2 Answers

Tape will not eject servo reaches halfway but sticks XL1s

Try this...

Hit the eject button. As soon as it makes it half way, take the battery out.
Leave the white cover open, put the battery back in.

This should take the tape cartridge up all the way and eject the tape.

I had the same problem and it ejected the defective tape


Jun 23, 2008 | Canon XL1S Mini DV Digital Camcorder

1 Answer

Canon Elura 100 won't eject tape

I have been having the similar problem. Try switching the power to off and then eject the tape in the off position. My finally ejected.

Apr 04, 2008 | Canon Elura 100 Mini DV Digital Camcorder

1 Answer

Eject tape message

We get the eject message and then it will not eject tape.  Any suggestions

Mar 04, 2008 | Canon GL1 Mini DV Digital Camcorder

1 Answer

Canon MVX200 will not load dv tape

The "remove Tape" error message on Canon DV camcorders is a general message meaning something is not correct with the tape transport system. These are miniature precision mechanisms and It could be anything from dew sensors to head motor, capstan drive etc. If the cassette drawer closes OK with no tape inserted then the tape sensor/ end tape sensor is operating. With no tape inserted the head drum does not run when the drawer closes but it does with a tape present. Does the head drum start up when you load a tape or is there no noise at all? If the head runs then it is possible the capstan is not starting or is jammed. If the head does not run then the cure will be either extremely tedious and delicate or very expensive. These units do not dismantle easily so unless you have some experience with this, or are willing to take a risk, then I would not recommend it. However, without such action you may have to write-off the unit anyway. Canon's repair charge will exceed the camera's value unless it's still under warranty. Your best option would be to find a local repairer that is willing to look at it, but I wouldn't be too optimistic .To some, this error message is a major issue when deciding to buying canon dv cameras. However, they are great little cameras and treated kindly will give many hours of excellent service. Don't store the camera with tapes loaded. don't subject it to sudden temperature changes or excessive vibration. Store it in a dry protected atmosphere and refrain from taking it onto the beach (salt AND sand !!!!) when on holiday etc.

Dec 17, 2007 | Canon MVX200 Mini DV Digital Camcorder

1 Answer

Cassete willl not eject

Solutions * The most frequent cause of this type situation is not having a power source attached, or a depleted battery pack. * Once the power source is available, some models require manually unlatching and opening a cover. * When the cover is fully open, the cassette will eject automatically after a few seconds. * If the tape still will not eject, seek assistance from a Service Facility because you need a special tool to remove the tape without causing further damage.

Dec 13, 2006 | Canon MV850i Mini DV Digital Camcorder

1 Answer

Playback & Ejection Problem

Hi, You usually get an EJECT TAPE when the camcorder has found an internal problem and either the videocassette or the camera itself has developed a problem. In you case, it looks like you tape has a problem. Daniel

Sep 04, 2005 | Canon ZR25MC Mini DV Digital Camcorder

Not finding what you are looking for?
Canon MVX200 Mini DV Digital Camcorder Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Video Cameras Experts


Level 2 Expert

373 Answers

Sheryl Bahr
Sheryl Bahr

Level 2 Expert

65 Answers

Chris Phillips

Level 1 Expert

19 Answers

Are you a Canon Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides