Question about Kenmore 24032\24036 Top Load Washer

1 Answer

My Kenmore 80 series fills with water but nothing else happens - no clicking, humming or agitating.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 62 Answers

Mine did the same thing. It was bad lid switch. It is best to replace switch, but you can bypass it by cutting its two wires, connecting them together, and taping the spice. Be aware by doing so that the washer will now agitate and spin with the lid up, which is the purpose of that switch. Also unplug cord from wall before doing any repairs. Attemp only if you are comfortable with wiring repairs.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have kenmore 80 series heavy duty/ super capacity plus washer that after it fills with water,hot or cold and it starts the wash cycle, I noticed that the agitator only moves once in awhile and stops


hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Feb 17, 2015 | Kenmore Washing Machines

1 Answer

Kenmore 300 model 110.28322700 won't run. motor makes humming sound


Pre Thanks for help.

I have read all above and these are my symptoms.
1. Washer fills, may or may not agitate, will not advance to the rinse cycle, and will NOT drain - lid switch.

however i tested my lid switch with a multimeter and the lid switch seems to be fine.

What else could be my issue?

Kenmore 300 110.28322700

Dec 03, 2011 | Washing Machines

1 Answer

I just replaced the transmission on my Kenmore 80. No agitation


your motor turns one way for the spin cycle and the other way for agitate. remove the coupler and test it that way.

Feb 04, 2010 | Kenmore 24832 Top Load Washer

1 Answer

Kenmore 80 series washer. Agitates immediately and does not fill


it sounds like the water valve is bad,the water valve level(sm. med. lg.)controls the water valce-mike

Jul 17, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series


Look inside the pump. Smething might be in it. If you incorrectly installed the couplings too tight against the tranny or motor then the resulting bind will cause the problem.

Jul 08, 2009 | Washing Machines

1 Answer

Kenmore 80 Series will not fill up with water


if your washer will agitate when set to fill but not fill, then your pressure switch is bad.
also you may want to check and see if you are getting both hot and cold to your washer.

Nov 24, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washing machine


This is usally a timer problem that is shorted

Oct 20, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 23012, spin cycle problem


This sounds like a broken coupler gear. I'm having the same problem with my Kenmore-80 Series. The machine fill up, pump out, but when I try to spin I get nothing and the I can hear the motor humming/grinding. I've heard the coupler gear is not expensive $35 or so and the repair procedure is not difficult, but I can't locate how to fix it. If you find any additional information, please send my way. I don't want to pay $150 or so to have it serviced.

Mar 13, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2183 Answers

fordexpert

Level 3 Expert

5522 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...