Question about Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

1 Answer

THe Dishwasher just keeps Washing And Rinesing

THe Dishwasher just keeps Washing And Rinesing The holl Time its running

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turned Fridgidaire washer on last night before going to bed; this morning, it's running (at least making sounds) but did not wash; 4000 Series Frigidaire; display says Washing Drying Er Clean S; and two lights are flashing - Ultimate Scrub and Rinse only.
I tried turning off the breaker and restarting the machine but that doesn't work.

Posted on Sep 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher keeps running


That is a indication of a bad timer the timer is the nob that u turn to make it run drop door down take off the top six screws on the door from the inside then pull off the knob then there will be two screws behind nob and the time should come right out then once u get the new time pull off wires one by one to make sure u putt when in the same place

Jan 16, 2014 | GE Dishwashers

1 Answer

Will not shut off


Hi this problem is the soil sensor. Basically the dishwasher will continue washing or add time to the wash if it thinks the dishes are still dirty. You will need to replace the soil sensor normally located on or by the drain pump. Mike

Mar 25, 2010 | Viking 24 in. Professional Series VUD040...

2 Answers

How do you rmove the old ignition lock from a 1999 F-350?


the ignition lock or cylinder?..if it is the cylinder, Fords have a very small holl under the cylinder , you will need an small pick , get into the holl and push a pin that hold the cylinder and at he same time pull the cylinder..is easy

Aug 02, 2009 | 1999 Ford F350 Regular Cab

1 Answer

KitchenAid dishwasher allows water to drain while washing


Your dishwasher is siphoning the water out. The drain hose should turn upward, nearly to the bottom side of the counter top, before it attaches to the drain or disposal. If it has an independant drain it still needs the rise and also needs an air break to stop the siphoning.

Jul 17, 2009 | KitchenAid 24 in. KUDS01FLBL Built-in...

1 Answer

Bosch dishwasher motor keeps running no water


There is a recall on the control board of many of these models, butyour problem is likely not related. I have written a guide to help. It is here. Thanks!

Mar 23, 2009 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

Sometimes the water does not shut off and overflows.


you have a blockage in the water pressure system. this will require cleaning out the pressure chamber and poss the pressure tubing. secondly the pressure tube may be holled. thirdly the pressure switch may be faulty. better get an engineer in the check it out i fear it will be a quick repair if you tell them my advise.

Mar 17, 2009 | Washing Machines

1 Answer

Dishwasher won't cycle through to rinse/dry/stop


Your timer switch is most likely defective.

It probably needs to be replaced.

It is like a clock with switches at different times

If it is stuck at a particular time it will run there forever.

Before servicing disconnect power!!!!!!!!!!

You can remove inside door panel with about 6 phillips screws or so.

Timer is directly attached to the dial on your machine.

These cost about $100.00 or less.

Can also be found used online for cheaper.

Oct 26, 2008 | Kenmore 24 in. 17512 Built-in Dishwasher

1 Answer

Kitchenaid Dishwasher - LOUD


i've found that if a glass or a dish breaks little pieces get caught in the grinder that is built in with the motor in time it will go away.

Jan 25, 2008 | Dishwashers

1 Answer

Dishwasher does not work all the time


Your dishwasher i believe has a potential start relay, it sounds like this relay is faulty and not disengaging the start winding properly. Remove the two lower panels there will be a small plastic looking switch with 3 wires and coiled with bare copper wire.

Oct 14, 2007 | Maytag PDB3600A Built-in Dishwasher

Not finding what you are looking for?

Open Questions:

See all Frigidaire 24 in. FDB1050REC Stainless Steel Questions

Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher Logo

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Brad Brown

Level 3 Expert

15557 Answers

Robert Roath
Robert Roath

Level 1 Expert

35 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...