Question about EarHugger Around-The-Ear Headphone with In-Line Volume Control Headphones

Open Question

How to remove volume control from computer headphone

I have a i ball headphone whose volume control is not working.I wanted to know weather the headphone will work without the volume control.I can always adjust the volume from my computer.
So is there a way by which i can make the headphones work without volume control


Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How do I get sound to my Sennheiser RS120 wireless headphones when it shows as working properly?

Dirty volume control on headphones. Try moving the volume control back and forth several times to clean off the contacts.

Dec 14, 2014 | Sennheiser RS 120 Consumer Headphones

1 Answer

Hi. Suddenly the volume controls for my Sennheiser i300 headphones for iPhone have stopped working. Any ideas? Thanks in advance Paz

I thought this was another example of the proprietary world of Apple, whereas any non-Apple made or certified headphones/headsets with mic and/or volume control will not work with an iPhone or iPad (I am not sure about iPod). It took me many headsets to figure out what was going on. However, your headphones seem to be made for iPhone and sold in Apple stores. If this is the case, I will go back to any Apple store and talk with the tech people there about your situation.

Oct 23, 2014 | Sennheiser Headphones

1 Answer

Trying to get new headphones to cancel speakers on tv

What kind of headphones and TV are you trying to make work as an combined pair? It sounds to me as though you have your head phones plugged into the speaker location on the TV which could be a small hole that shows a pic of speakers. Look on the TV for an 'mic' or 'pic of headphones' holes. If there is an plug in hole with either it states mic or shows a pic of headphones plug the headphones into that hole instead of where you have them plugged into now.

Another suggestion is to use MDI cords in which you may already be using aka white, red, yellow colored plugs. If those plugs are assembled in the slots incorrect that also could be the reason as to why the headphones turn down when you turn the volume to the TV down; which also would influence the TV volume its self to also disengage to go either louder or quieter. MDI cords should be plugged in the following pattern to be categorized as the following with each color following the next color; yellow, white, red. Now if you are using MDI cords presently do you have them plugged in front or back of the TV?

If the TV has hole ports in both front and back for MDI cords then reverse your plug ins. Example: If you have them plugged in the front instead switch all three to the back of the TV or vise versa.

Also another thing; since you are wanting to use headphones for your TV speakers instead of the TV speakers themselves usually plugging headphones in are controlled by TV volume buttons; however I am assuming that you are trying to state that when you plug headphones into the TV you still hear the volume in your ears and anyone in the TV room is also still hearing the TV even though headphones are plugged in, am I right?

With you wanting to cancel the speakers on the TV out only attempted to use TV volume for speakers and without it working means you have the MDI cord plugged into the audio which would cause the TV to power the volume for the headphones anyways. May I ask this; since I am a bit confused, alright are you wishing for the headphones to be able to be loud enough so the TV only powers them for volume when you use the TV?

I know that headphones being plugged into an TV should only keep their volume within the ear buds. Therefore I have never heard of headphones being able to be loud enough to power out room sound. Instead they power internal volume which would be within your ears. Headphones were meant to keep noise and volume from surrounding a room to block room noise out and to keep the sound for your/ an own persons only listening capability. So because of this I am confused as to how ear phones would have the ability to sound the room with audio.

I can understand that if what you are trying to say is that the speakers on the TV still output volume even with head phones plugged in which would be an issue, since head phones are to capture the volume and noise from the unit in which plays aloud- to actually silence it instead- for the individual whom requires or presumes to have themselves to be the only listener.

Jan 02, 2014 | JVC 900MHz Wireless Stereo Headphones with...

1 Answer

Left headphone no sound

Spray a little CRC in around the control an wiggle the control back and forth. It worked for me. Good Luck

Nov 12, 2012 | TDK Headphones

1 Answer

The cord on my philips shl9600 headphone was recently severed. The cut happened just below the volume control dial. Are these headphones now completely useless, or can the perfect working head set still be...

See my tip on replacing dodgy cables plugs on headphones. Just click my name. I doubt you will be able to save the volume control, unless it has screws to open it.

Nov 21, 2010 | Philips (33-01-031) Headphones

1 Answer

How do i set up the Technika TA-709 Wireless Headphones to my tv. Have lost the manual and am not getting any sound only static on all 3 channel selections.

You should have all the necessary cables to do this with the package you bought, the wire which has a headphone style plug on each end should be plugged into the headphone jack on your tv.

If they dont work then there are two further things that could be at fault:

A: The headphone audio volume controls and the actual speaker volume controls on tvs are totally different and if the actual headphone volume is turned down then you will get an interference type noise thru your headphones as no sound is being detected by the reciever and therefore they go into kind of a standby mode. !!!!!!!!!!Try looking in your TV settings menu to make sure your headphone volume is turned up!!!!

B: being an owner of a pair of these headphones I know how audio the cable can easily turn faulty from prolonged use us. The wires can easily break inside but look fine from the outside so get a new one. Headphone jack to Headphone jack cable.

I use these along with my xbox 360 wireless earpiece (fits nicely under the headphones) and I think they're far superior to the Turtle beach headphones +++ My setup is 100% wireless which also makes it better than any turtle beach setup on the market.

Jan 07, 2010 | Headphones

1 Answer

I bought my rca headphones a long time ago and haven't used them in years. I was wondering, how do I hook them up to my computer. And what all I need to do to hook them to my computer.

Just plug the RCA Headphones Base Station into the headphone or speaker jack on the back of your computer (the headphone or speaker jack usually being green in color), and turn the volume up in Microsoft Windows to about 75%, then adjust the volume control on your headphones to a comfortable level. (p.s. even if you don't use Microsoft Windows, turn the volume up to about 75%, as most computer sound chips are very similar in their output level.)

Nov 13, 2009 | RCA WHP150C Consumer Headphones

1 Answer

My volume is too low and the volume control

increase the volume on your phone or computer

Oct 22, 2009 | Motorola Mobility S9 Headphones

1 Answer

We can hear the customers but they can not hear us! Help

Here's the troubleshooting from the manual:
  • Make sure voice tube positioned properly
  • Voice tube is not clogged (remove tube and see if works)
  • Verify transmit volume control of amplifier is set properly
Couple other suggestions to try:
  • Reseat all connections to make sure firm connection
  • Look for any other volume controls

Link to manual for headset:

Apr 06, 2009 | Plantronics H251 SUPRAPLUS MONO HEADSET -...

1 Answer


Try opening the volume control (you should find a VOLUME icon in the bottom right corner of the screen. Right click on this and open volume control.
Check if the "microphone" level is down or if the mute button is checked. If it is, click on it again to uncheck and increase the microphone level to full. If you do not see the Microphone level at all, click on "options" and then "properties" and make sure microphone is checked.

Hope this helps..

Mar 29, 2008 | Logitech 502B Consumer Headphones

Not finding what you are looking for?
EarHugger Around-The-Ear Headphone with In-Line Volume Control Headphones Logo

Related Topics:

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top EarHugger Headphones Experts


Level 3 Expert

4518 Answers

Owen Barnes

Level 3 Expert

835 Answers


Level 3 Expert

3283 Answers

Are you an EarHugger Headphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides