Question about Sony KP-61V85 61" Rear Projection Television
4 blinks is a vertical Stoppage, this is a failure on the D board. There are many ways to approach this repair. The easiest self help method is to replace the D board. (On some of these sets this board is referred to as the DZ board) But there are hazards when working inside a tv. Care must be taken to avoid electric shock even with the set is unplugged electric shock can still occure. If you are unsure about doing this yourself depending on the approch from the repairman it could cost anywhere from 200 - 350 to repair. I am not in the position to give you the board part number now but if you want it just post back here and i will get it on monday.
Some repairmen will replace the board and some will attempt a component level repair, which is more complex but is usally cheaper for the customer.
Posted on Sep 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 06, 2012 | Mitsubishi WS-73713 73" Rear Projection...
Aug 31, 2011 | Mitsubishi WS-55807 TV
Aug 09, 2011 | Mitsubishi WS-65807 65" Rear Projection...
Jul 16, 2011 | Sony Televison & Video
Jul 15, 2011 | Mitsubishi WS-55819 55" Rear Projection...
Standby/Power light of the TV blinks when there is any internal malfunction in
the TV. The self-diagnostic function of the TV will cause the STANDBY light to
blink or flash when the television detects an issue. The number of times the
STANDBY light flashes corresponds to a specific issue.
examples are given below; some of the issues may be resolved without the need
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.
the television is plugged into a power strip or surge protector, remove it from
the power strip or surge protector and plug it directly into the wall outlet.
If the issue is resolved, the problem is with the power strip or surge
protector and not the television.
the issue continues to occur, service may be required.
for using Fixya.
Mar 02, 2011 | Sony KDF-E42A10 42 in. LCD Television
May 01, 2010 | Mitsubishi WS-55809 55" Rear Projection...
Dec 31, 2009 | Mitsubishi WS-65513 65" Rear Projection...
Aug 10, 2017 | Sony KP-61V85 61" Rear Projection...
390 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: