- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The same button you pressed to start the recording, must be pressed to stop the recording.
If the camera acts strange, you first have to look if the memory access light is burning or flashing. As long as this light is on or flashing you are not allowed to remove the battery. Only try switching off the camera, When the memory access light stopped burning or flashing, you eventually can remove the battery, to stop the camera acting in a strange way.
When you have had a problem with the camera, switch it off, and then remove the battery for a short time. Then reinsert the battery.
If your camera is switched on, you can change the shooting mode, by tapping the back panel (screen) and go to the logo's you see, to change it from recording video to taking pictures.
All details about your camera you can find in the manual. All Nikon manuals are online with Nikon USA.
This is an odd question. I think you mean, how do I stop recording a video, so I can take pictures. After you switched on the camera, you press the shooting mode button (camera logo). then on the left of the display you see four logos. Your camera is on the forth logo from the top (FilmCamera logo)
Tap on the display, on the top (camera) logo, to enter the picture taking mode.
It is all in the manual on page 26.
When you get more experienced, the same screen can guide you on to more complex modes, so you also can improve pictures when you meet extreme situations. In the auto mode 99 percent of the shots will be good.
Sounds like some of the spaces on the card are becoming corrupted. How do you download? With the camera and USB cord, card inserted into reader on computer, or card inserted in a separate card reader? When you are finished downloading, do you use the "safely remove hardware" icon at the bottom right of your computer screen or do you just yank out the cord or card thereby causing the corruption?
It has what is called reverse mode which flashes to protect the display to turn feature off please follow these steps. Press the 5 numbered button when power to this unit is turned off while the ignition switch is set to acc or on will cancel the reverse mode and stop the flashing. Hope this helps.
Rear View Camera Input: The VM9313 features a composite video input and a green/white wire lead attached to the harness for connection of a rear view camera. If a rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera modes is selected upon shifting into Reverse gear. When shifting into Drive gear, the TFT monitor is retracted back inside the unit. If the monitor is already in a viewing position and in display mode, the monitor automatically switches to Camera mode upon shifting into Reverse. When the reverse driving stops, the monitor returns to its original input display mode. You can choose for the monitor to display a Mirror mode image or a Normal mode image from the rear-view camera.
The change in the backgroung color of the OEL display is totally normal. This funtion lets the display works in two modes rather than only one to prevent OEL display damage, it is like a screen saver. I had the same model I bought