Question about Microsoft Xbox 360 Controller

2 Answers

Keeps on blinking

I my controler just keep blinking so i got a new one but dose the same thing

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

You need to be a little more clear. if its a wireless controller and it DIDNT work while it was blinkin the solution is VERY easy. all you have to do is sync it with your xbox. you can sync it by pressing the button next to the memory card slots (on the console) then pressing the button on the top left of the controller (next to the trigger the xbox should read the controll and you should be fine.

Posted on Sep 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 74 Answers

If its wired; try connecting it to a different port on your 360. if its wireless the charging cable could be bad

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why dose my power button keep blinking, and I get no picture?


it is sound like your telecomand are damaged and its keeping press one button down. Try to remove the batteryes and open the tv and see if the device do the same ......

Jun 10, 2014 | Toshiba CX36F67 36" TV

1 Answer

Channel input displays keeps blinking


this is a faulty Main controller Board


part number : 715T2300-3

hope 2 help

www.bostonrecycling.net


LCD PARTS / PLASMA PARTS / LAPTOPS PARTS

Jun 25, 2012 | Dynex DX-LCD32-09 LCD TV

1 Answer

My dish washer dose not start, it keeps yieling "


Hi enasammar, First thing to do is to reset. Merely unplugging the power cord from the wall socket for 4 hours, then power up again.The purposed of unplugging is to dissipitate the stored current in the memory IC thats control the unit to hang up, so it will gone. Take out all inside the unit and clean,then turn on . If still not working give me the model number so i can find the schematic diagram for that unit. Hope it may helps.
Regards: VOTIT

Dec 03, 2010 | Frigidaire Dishwashers

1 Answer

What dose it mean when the standby light flashing?


Hello
In Sony TVs, number of blinks of the standby light denotes some problems inside the circuit board of that TV. The number differes with the section where the fault is. According to the number of blinks, we can reach to fault point easly. Just count the number of blinks, with TV switch On-Off with its front panel switch, not by the remote control. Keep this in mind. Ok.

Nov 05, 2010 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

My xbox 360 controller's light keeps blinking!!


try putting new batteries in the controller.

May 19, 2010 | Microsoft Xbox 360 Controller

1 Answer

The TV button at the top keeps blinking and the rest of the buttons do not work. I tried replacing the batteries but it still keeps doing the same thing.


This light is caused when there is a fault with the circut board. If you are able to get the remote apart you might fid some liquid lik substance on the board. take a cotton bud and clean it dry put the batteries in it and it should work like new

Jan 16, 2010 | Samsung BN59-00599A Remote Control

1 Answer

It dose not turn on its light keep on blinking and the screen is complete blaack


Try reseating the RAM (unscrew plastic covers on the bottom to find it), or if that doesn't work, try new RAM.

Sep 11, 2009 | Compaq Presario R3000 Notebook

1 Answer

Samsung Remote BN59-00539A not working


Remote Control not working with dvd plyer

Mar 25, 2009 | Samsung BN59-00599A Remote Control

3 Answers

"Clean light" keeps blinking; dishwasher won't start new cycle


Check to see how it's loaded. If something is obstructing either of the spray arms it will not start. I had this same problem and checked to see if there was something impeding the arms - I found there was. Reloaded the unit and it's running like a champ now!

Feb 07, 2008 | Frigidaire 24 in. GLD2150RCC Built-in...

2 Answers

Need help


Same here. Blinking all the time, will not play.

Nov 08, 2007 | Crayola YCMW2816G 256 MB MP3 Player

Not finding what you are looking for?
Microsoft Xbox 360 Controller Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

marley mcelhinney

Level 3 Expert

490 Answers

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...