Question about Logitech Webcam

2 Answers

My logitech camera shows what is on my computer

My logitech webcam shows what is on my computer screen instead of what it is focused on, but only in video chat rooms like skype and msn, not in the cameras own software. It temporarily fixed itself once after a reboot but the problem came back the next time I turned on my computer and now wont fix.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,844 Answers

I think you need to:-
Close all programs
Uninstall the logitech software
Restart computer
Visit Logitech support, Identify your webcam and download software
Close all programs during download


http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

Posted on Sep 06, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 2,130 Answers

1st You download Webcam Driver.
My logitech camera shows what is on my computer
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on May 14, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the advanced settings on my cam supposed to be?


The Logitech QuickCam is a webcam for Windows-based notebooks and laptop computers. The device also works on desktop computers, but contains the mounting hardware for portable computers. The webcam includes a USB connection, utility application and the device driver so your notebook's operating system can recognize the device. Like other webcams, you need to focus your Logitech QuickCam so individuals viewing you on the Internet or through other means can see you clearly. Open the Logitech QuickCam utility program by clicking on the program's icon on your computer's desktop or by clicking "Start," "All Programs," "Logitech," " Logitech QuickCam." Click on the chat client or website you are using the Logitech QuickCam on if you are not using the Logitech QuickCam utility. Turn the webcam's focusing ring on the front of the camera to the left or right slowly to focus the camera. You will see your image in the Logitech QuickCam preview window on your notebook's screen. Rotate the webcam's head, if needed, to center your image in the preview window. Hope this helps.

Jan 19, 2013 | Logitech C110 Webcam

1 Answer

Focus


The Logitech QuickCam is a webcam for Windows-based notebooks and laptop computers. The device also works on desktop computers, but contains the mounting hardware for portable computers. The webcam includes a USB connection, utility application and the device driver so your notebook's operating system can recognize the device. Like other webcams, you need to focus your Logitech QuickCam so individuals viewing you on the Internet or through other means can see you clearly. Open the Logitech QuickCam utility program by clicking on the program's icon on your computer's desktop or by clicking "Start," "All Programs," "Logitech," " Logitech QuickCam." Click on the chat client or website you are using the Logitech QuickCam on if you are not using the Logitech QuickCam utility. Turn the webcam's focusing ring on the front of the camera to the left or right slowly to focus the camera. You will see your image in the Logitech QuickCam preview window on your notebook's screen. Rotate the webcam's head, if needed, to center your image in the preview window. Hope this helps.

Jan 17, 2013 | Logitech C615 Webcam

1 Answer

I have the logitech c200 webcam and it wont show a clear picture. any suggestions?


The ring on the front of the camera is used for focus, just like the manual focus on most older 35mm cameras. Try rotating it back and forth while looking at the image on screen.

Jan 23, 2011 | Logitech WEBCAM C200

2 Answers

I have installed the webcam and my image is blurry


Adjust the Focus: The Logitech Webcam C200 has a manual focus. It may need to be adjusted upon initial use, and from time to time, as bumping and moving the webcam may accidentally knock it out of focus.

1. Locate the knob that surrounds the camera lens (shown below).
c200-cs1.jpg 2. Twist the knob clockwise or counterclockwise until the camera comes into focus.
Improve the image Quality:
To improve the image quality or avoid any type of blurriness from your camera please verify that the following:
  • You have good lighting in the area or room where you are using your C200.
  • Your computer has at least an Intel Pentium 4 (2.4 Ghz) processor and a minimum of 256MB RAM.

Nov 25, 2010 | Logitech WEBCAM C200

1 Answer

Troubleshooting


Instructional steps to follow
  1. Verify that the Logitech webcam is connected to your computer if your computer doesn't register its existence, if the webcam's power light isn't glowing or if no image shows on your webcam software. The webcam's USB cord should be firmly inserted into an open USB slot. For the best results, use a USB port on your computer instead of a port on a peripheral device like a USB hub or a keyboard.
  2. Adjust your room's lighting if the Logitech webcam image is excessively dark. Logitech's cameras have no built-in light. For the best viewing image, your light source should come from behind the Logitech webcam instead of shining into the webcam's lens.

  3. Quit any open programs other than the software that's using the Logitech webcam if you get errors regarding more than one program trying to use the camera (e.g., a chat software and a voice-over-IP program both trying to use it at once). This can create data problems and software conflicts.
  4. Check for updates to your Logitech drivers from Logitech's support site. The company regularly releases software updates and patches that resolve commonly encountered glitches and problems. Download the patch and double-click it to initiate an automated installation process. Your computer typically needs to be restarted before you can resume use of the Logitech device.
  5. Contact Logitech's webcam support line at 646-454-3209 if you still cannot get your webcam to work correctly. Support technicians are available weekdays from 6 a.m. to 6 p.m. PST and on Saturdays and Sundays from 7 a.m. to 5 p.m. PST. Have your model and 10-digit part number ready. Such numbers are usually located on the bottom of the webcam or on its packaging.

Oct 31, 2010 | Logitech Webcam

1 Answer

I have Logitech 4000 camera and all 5years it works excellent. I use it more times on Skipe with Window Pro. Now I have Window7 and every time, when I use Skipe Ican have only one video call. When I try...


You are right - the camera is not supported by logitech for Windows 7 and I am surprised that you have some level of use with it.
A couple of things you can try -
1) Instead of restarting your computer just unplug the webcam for a few seconds and then plug it back in.
(This will re-boot the webcam software) the same as restarting the computer)
2) Do a quick check running the webcam in Compatibility Mode
Right click on the webcam icon on your desktop or the webcam file from 'All Programs' - select 'Properties'
Select the 'Compatibility' tab
Select 'Compatibility Mode'
Use the dropbox to show the OS you have successfully used before
Click OK
Restart your computer

Sep 01, 2010 | Logitech Computers & Internet

1 Answer

Webcam is not showing any video at all!


Connect your webcam
Launch the logitech webcam toolbar from your desktop or if you chose not to install the shortcut - launch it from "All programs" or from your C drive - Programs and files.

Open the Quick Capture menu (2 film frames pic)
Check your image here
If it shows white - you have a logitech/computer software problem
If its OK you have failed to configure it correctly to whatever program you are using it in.

Did you install the support software required to run Logitech cameras - Directx 10 ?

Apr 24, 2010 | Logitech Webcam

1 Answer

Logitech web cam is blurry


somewhere on the camera there will be a focus knob, usually it is the housing just outside the lens that your fingers can grab hold of. she need to turn it until it comes to focus

Apr 23, 2009 | Logitech Webcam

1 Answer

MY LOGITECH QUICH CAM HAS BECOME OUT OF FOCUS


http://www.logitech.com/index.cfm/webcam_communications/webcams/&cl=us,en Go here and download an owners manual that will explain in detail how to adjust the cam.When voting this is a fixya not helpful vote.RICHARDM69

Dec 18, 2008 | Logitech QuickCam Express Web Camera

1 Answer

It zooms really close to my face


1) Launch QuickCam software, just goto Start>Programs>Logitech>Logitech QiuckCam.
2) Press the "Change Settings" button, and in the Settings page, just choose the manual focus option, and adjust your focus until the image is clear.

YBC (/\)

Oct 08, 2008 | Logitech QuickCam Communicate STX Personal...

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2841 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...