Question about Electrolux Washing Machines

1 Answer

Hello Greetings from rural wa, we have a electrolux 9,5 top loader which stared to leak slightly when washing, this has quickly progressed to a terrible noise when spining. I have removed the outer cover and noticed that the main bearing has thrown it,s grease and is probably shot, hence the on earth do i remove the agitator so i can get access to the bearing. Do you have a repair manual in pdf. If i can get this out then i can order the spares as well. Thanks Dominic Ryan Pannawonica 6716 08-91841717

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer


Thanks for the mail, with all due respect i did not find it helpfull at all, i was sent to a gerenic website on something i learnt 20 years ago. It took me two minuits to realise what was happening, there was no point in continuing.

As i told you in the email the bearing had thrown grease and to solve the problem it would need replacing. The position of the bearing and the disassembly there of would be tedious so i was hoping if there was any notes available that would assist in it's speedily removal considering how remote we are and the nature of my work away from home.

Obvoiusly you do not have this information and it's not appreciated to be sent to websites from pillar to post, it would be better to simply say we do not have this info. I called our engineering office in Perth yesterday who not only identified the bearing and seal but also sent through an Electrolux scanned image of exactly what i requested and expected from you initially ....the amazing thing is it did not cost me $12.99. the only information i was asked to provide was the seriel no. of the machine.

Dominic Ryan

Posted on Sep 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fisher & payket washing mac. Always goes of balance each time no matter how much or setting I use been like it for 4weeks model washmart WA 1068G1

top loader
indicates that the tub support rod air dampeners have failed and you need a set of new rods

Mar 18, 2018 | Washing Machines

1 Answer

Electrolux front load washer leaks from soap drawer

This is a common problem with front loaders. Probably poor design.

Jun 23, 2017 | Electrolux AWF 1435 Front Load Washer

1 Answer

My electrolux 880 front loader won't spin anymore

One of two things ... door lock or a speed board... I have been a tech for 10 years and I can say 9 times out of 10 its the speed board ... Its the board down by the base of the washer

Mar 24, 2011 | Electrolux Washing Machines

1 Answer

Machine is loosing memory (Guide- PCB STD DC61-00448A KT2-2 HIPS) The machine is a top loader.please help!

i have washing machine model no WA 85B9. Now that is some problem.There is show 'E1'.How to solution that problem?

Dec 11, 2010 | Samsung Washing Machines

2 Answers

Top loader MW511 will not start. Wash Progress (where you select wash type eg long or short) is the only display with lights showing, and I cannot change anything despite pressing the button to do so. No...

Hi just read your posting.Now on that wash progress line of lights there are 8 lights in total.Starting from the far right what lights are lit up?Is it the 2nd and 5th or the 4th and 8th--etc---?With this additional information I can work out the error code and advise you how to repair this fault.Please reply for further help.

Jun 20, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

My 7.5kg Electrolux Washing Machine whent bang and

your door lock has blown/short circuit turn power of disconnect plug take top of machine look down inside machine toward door lock and you shoud see the catch push hard with your finger and door will open be careful as there are some sharp edges in there.

May 31, 2010 | Electrolux Washing Machines

1 Answer

I have a 6.5Kg electrolux front loader washing machine it needs a new pump and circuit board... where can i get one of these from????

sorry - no idea - but just mentioning that sometimes pump is blocked by bits of cloth - which is easy to free once you remove pump - this also stops machine continuing normal cycles - i thought mine had problem with the circuitry as it didn't progress automatically but after clearing cloth out of pump it's back to full swing!

Nov 01, 2009 | Electrolux EW1000i Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides