Question about D-Link DP 300U (DP-300U) Print Server

4 Answers

Can't reset password D-link DP-300U

Help me please
can't reset password D-link DP-300U

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Can anyone tell me, what IP Address when reset to default? thx's...

Posted on Dec 04, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

DP-300U's have no reset button that I've seen, but here's what worked for my DP-300U's lost password. Use the PSAdmin software to do a factory reset (download it from the internet if you need to). If it demands a password try the following:

password: SYSXXXX (Where XXXX is the last four digits of the MAC address, which can seen on the underside of the server)

I learned this from http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten, which goes into additional helpful detail.

Posted on Dec 31, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

There is a small button of most of them for the reset,look carefully.

Posted on Sep 05, 2009

  • compvis Jan 25, 2011

    Heeman please dont giver advice if you dont know what you are talking about there is no reset on the DP-300

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Try finding the pin size reset hole in the back of the unit and press and hold it for 5 seconds for reset. Or unplug for 15 seconds. This should reset back to default settings.

Posted on Sep 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the default password for D-Link DP-300U print server? Thank you


The D-Link DP-301U Print Server does *not* have a password by default. If you have come into the possession of one and it is password protected, then it is likely that the previous owner added a password.
In order to bypass it and reset the Print Server, while the device is powered on, you will have to hold down the RESET button on the back using a paper clip for 10 seconds.
[NOTE: If this helps, please leave feedback.]

Aug 11, 2010 | D-Link DP 301U (DP-301U) Print Server

2 Answers

I already change the ip address of my d-link dp-300u printserver and then i accidentally remove the check in the the tcip selection, when i reset again i can't see my printserver. how can i reset it to...


Reset button is in back panel of printer sertver.
Press it for 10 seconds.
Then all settings goes to defaults.
Reset button is small round in back side of router you can press it's pin with any ball -pen.
Let me know if you need further assistance.Thanks.

Nov 11, 2009 | D-Link DP 300U (DP-300U) Print Server

2 Answers

How can I reset my printer derver dp-300 to factory defualt values? Close


how reset password for dlink 300 print server please give me solution

Nov 11, 2009 | D-Link DP 300U (DP-300U) Print Server

3 Answers

A reset problem


Try using the PSAdmin software to do a factory reset (download it from the internet if you need to). If it demands a password try the following:

password: SYSXXXX (Where XXXX is the last four digits of the MAC address, which can seen on the underside of the server)

I learned about the password part from http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten, which has additional helpful details.

Jun 17, 2009 | D-Link DP 300U (DP-300U) Print Server

2 Answers

There is no reset button


dear
Better way when you take new dp 300u unit in box cd in cd admin software run you can reset button is there please check

May 11, 2009 | D-Link DP-300U (DHDP300U) Print Server

2 Answers

Hi , please i have forgot my password Dlink dp 300u ,can you help me please?


Try using the psadmin software to do a factory reset. If it demands a password to do this, try using "SYSxxxx" (where xxxx stands for the last four digits of the MAC address written on the underside of the server. If you don't have the psadmin software you may be able to download it off the internet. After doing the reset you will need to follow the Quick Install Guide to set up the server. If you lost the Quick Install Guide you can download a new one from D-link's website. The following link may also be helpful: http://www.fixya.com/support/t224263-dp301p_psadmin_password_forgoten

Apr 20, 2009 | D-Link DP-300U (DHDP300U) Print Server

1 Answer

DP 300U


DP 300U's can get be pretty uncooperative when attached to a different router. One solution is to reset the DP 300U to its factory settings. Use the PS Admin software to do this. (If you lost the PS Admin software, you should be able to download it from the internet.) If the software prompts you for a password and you do not know it, try "SYSXXXX", where XXXX is the last four digits of the MAC address located on the underside of the print server.
After you reset the DP 300U you will need to set it up from scratch, a process which is not particularly intuitive. Refer to your "Quick Install Guide" (download it from D-link's web site if you don't have it anymore).

Oct 17, 2008 | D-Link DP 300U (DP-300U) Print Server

3 Answers

D-Link DP-300U Print Server Problem:


So... you've messed up the IP address on your DP-300U and now you can't even access the web browser configuration page? Yes, it's happened to the best of us. Although I'm sure there are more elegant solutions, one fix is to reset the server to its factory settings and then reconfigure it from scratch. Given that there is no reset button on the DP-300U, resetting can be frustrating, especially if it's asking you for a password that you never created in the first place! Here's what you can do...

1) Install the psadmin software which came with the print server. If you lost the software, you should be able to find it on the web somewhere.
2) Start the software. It should automatically locate your print server.
3) Click on "factory reset". If it demands a password, and you don't know it, try "SYSxxxx" (where xxxx is the last four digits of the MAC address written on the underside of your server)
4) Dust off your Quick Install Guide and go through the unintuitive configuration process. If you no longer have your Quick Install Guide you can find it on D-Link's website.

Good luck!

Aug 06, 2008 | D-Link DP-300U (DHDP300U) Print Server

1 Answer

Forgotted the Ip of D-Link DP 300U print server


You may use the PSAdmin software to configure your print server even if you don't know the IP address. The only requirement is that the DP-300U has to be in the same network (subnet) as your PC running PSAdmin. In the PSAdmin, you will then be able to view or change the IP address.

Here is the link to download PSAdmin:
http://support.dlink.com/products/view.asp?productid=DP%2D300U#apps

Remember that if you also have forgotten the Admin password, you will have to ship the unit to D-Link in order to have it factory reset.

May 10, 2008 | D-Link DP 301P (DP-301P) Print Server

3 Answers

Dp301p+ psadmin password was forgoten


Problems with your D-Link DP-300U LOST IP If you’re like me, you have a ton of computer **** laying around your house. Today I found an old D-Link DP-300U print server laying around and thought that I could put it to good use. The bad thing about these things is the fact that they do not have a hardware reset button on them, so if you forget the IP or the Password, you’re pretty much hosed… or so I thought. After doing some google searches for how to find a lost IP, I came back empty. The PS Admin program that D-Link publishes for use with this thing couldn’t find it on my network either. After some thinking, I came up with an idea.
If you know anything about networking and how networks work, you should have thought about this too. Get a Wireshark capture running. Unplug the power from the print server and then replug it. It’s going to send out an ARP on the network looking for it’s gateway which should be picked up by Wireshark. It should look like this:
capture.jpg In my case, it came back as 192.168.1.253. After changing the IP on my laptop to fit that subnet, I was able to log into it via it’s web interface (there was no password on it thank God!) and put it back to factory settings. Voila! What once was a brick is now a working print server!

I Copied it!

Shafiuddin Russel
infoshafi@gmail.com
+8801714073692

Feb 16, 2008 | D-Link DP-300U (DHDP300U) Print Server

Not finding what you are looking for?
D-Link DP 300U (DP-300U) Print Server Logo

3,466 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...