Question about Starlite Skyworth SLC1551AW 15 in. HD LCD TV/DVD Combo

1 Answer

NO POWER ON SKYWORTH SLC-1551A-1

I have no power to the TV, even with the 12 volts. Opened it up, found f1 on the small power board open, replaced with a 4 amp fuse, no markings on old one, just white surface mount type fuse did not blow when powered up so what ever took it out, has burned it self out, i did not pull the power board out yet to look for any hints

Still don't work i wish i had more info on this animal, cheap looking thing on the inside
Gary

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Gee, you want me to tell you for free how i fixed it, but, now you want to charge ME TO JOIN???? DID I MISS SOMETHING HERE

Posted on Sep 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Skyworth 12 Volt Marine TV/DVD 19" SLC1969AM3. Where can I get owner's manual and guide?


Skyworth SLC-1969A-3: User Manual ' Brand: Skyworth ' Category: Lcd hdtvs ' Size: 6.3 MB ' Pages: 19
can be download from the link below
Download manual

Feb 06, 2016 | Televison & Video

1 Answer

How do I fix lcd tv skyworth 40E58 power problem


The command to generate the 12VDC; from the power supply should come from the main board. S the main board should be troubleshooted in this case. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Jul 17, 2015 | Skyworth SLC-1971A 19-inch 720p LCD TV/...

1 Answer

Codes remote skyworth tv


0285,0289,0288,0281. Try these codes. If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls. Surf the sites with patience.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

Jan 26, 2014 | Televison & Video

1 Answer

Can't open SLC files from our IP TV set-top box HDD


Hi John
Please don't forget to rate may answer!

Just open VLC (make sure you have the latest version) then click
option 1) Media > Open Folder choose the drive / folder containing the SLC files then hit the "Select Folder" button.
option 2) Media > Open Multiple Files > Add Files > mark all the SLC files then then hit the "Open" button.

If VLC fails Try Media Player Classic!

Hope this solves your problem
Best Regards
XyFinx

Dec 14, 2013 | Televison & Video

1 Answer

My skyworth slc-1551 screen keeps going blank, then a pop up window comes up and says image is blocked enter password


When I called the customer service said to try 1979, or 0000 or, 1111, or 9999, the first one worked me.

Jun 17, 2012 | Starlite Skyworth SLC1551AW 15 in. HD LCD...

1 Answer

Seeking a tv manual


I have a skyworth TV model LO5HF 42 inch--manual in Chinese
is their or can i get the same manual in English plse

regards apirate1881@yahoo.co.uk

Aug 21, 2009 | SNK Skyworth SLC-1963AW 19 in. LCD TV...

2 Answers

I need codes for a skyworth tv


I'm sorry, but to help you, we need to know the brand and model number of your universal remote. Thank you.

May 04, 2009 | Starlite Skyworth SLC1551AW 15 in. HD LCD...

1 Answer

LCD tv issue


at error code is 12 and it is your 12-volt supply. Measure from the inverter to the power supply for 24 volts pins 1,2 and 3. If you don't have the 24 volts disconnect the inverters from the power supply and see if the volts come up. If the 24 volts come up replace the inverters. If the 24 volts are still not there replace the power supply. The volts have to be steady and not going up and down if they are replace the power supply.
But if the 24 volts are there with the inverters connected 1M03 pin 3 for 3.2 volts. If the 3.2 volts are not there replace the small signal board. The only way to get a manual is to find it on line or call the manufacture.

Aug 26, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

Blinks twice pause blinks 4 times


SYMPTOMS
Dead or Shutdown symptoms.
RESOLUTION
Dead symptom reported to be caused by the following:
1. Dead.
Found Q601 & Q602 shorted, R615 open, and IC600 on the A Board were the cause of the symptom.

2. Dead.
Found D614, Zener diode, on B+ line was shorted.

3. Set shutdown and the standby LED blinks 3 then 5 times.
Found 200v line was low. Disconnected CN706 on the C Board and found 200v now
present on CN706/pin 7.
Found: IC702 (C board) shorted the 200 volt line.
HQ Comments: C541 on the A Board could become defective if the 200v line is shorted since
the polarity on the capacitor will become reversed. R553 fuse resistor could also be opened
on the A Board.

4. Error code of 4 blinks .
Dead set press power button you hear the relay and you see red led flash 3 times and stops? Has no HV or other action. Tech removed the back as no 200 volt supply, did unplug CN706 and now has 200volts. Tech did remove the IC702 and same it comes up so needs this IC.

5. Dead. 5 blinks then 3 blinks. Found shorted Damper diode D504. Q502 has a built in damper, as well.

6. The TV does not turn On and the LED flashers 9 times.
Found one side of R610 open on the Base of Q690 on the A board.

7. Dead, 9 flashes, Q606
Would not start when cold, has stand by 5 but relay never energize.
No response from front panel or remote controls.
9 blinks is not in service manual.

Found Q606 (Zero Det.), on the A Board, had no soldered on the collector
of the transistor causing an intermittent connection.
Soldered the collector of Q606 and set returned to operation.
HQ Comments: Also refer to E30968554.

8. Dead. 5 blinks or 3 blinks
Found on the A Board D611 in the Power Supply open, and Hor. Output Q502 shorted.

9. Found Power Supply components D611 shorted causing Q600, Q601, and R615
to fail on the A Board.

10. No picture or sound. Standby flashes.
Found Q512 (Pin Out) shorted. on the A Board.





11. Dead. No sound or picture.
Found the FBT and Q502 were shorted, and R615 open on the A Board.

12. Dead
No power, Stand by light flashes 4 times.
Found T604 and IC601, replaced.
Found D611 on the A Board was the cause of the symptom.

13. Dead.
Found D534 shorted on the A Board.

14. Shutdown 4 Blinks.
Replacing R595, OCP Latch Q532 on the A Board, fixed the set.
PN 1-247-891-00, 330K 1/4 watt.

15. Unit shuts down after 15 mins.
Immediate shutdown - sometimes it give a 3 blink, sometimes nothing.
Found R595 (330K) was open located in the Q532 OCP Latch circuit.
R595 P/N 124789100 330k 1/4w

16. Won't power up. LED Blinks 4 times, B+ is very low
B+ is at 49V, +15/-15 only coming up to about 1 volt.
Wth Hor Out disconnected B+ only comes up to 50v.
Found D611 on the A Board was the cause of the symptom.

17. Intermittently does not turn on
Found a intermittent C633 on pin # 3 of IC600.
C663 P/N 113647911 Film cap .001uf 100v



Billy

If you need the service manual contact me at:billyjones@fletchersite.com

Jan 27, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Starlite Skyworth  SLC1551AW 15 in. HD LCD TV/DVD Combo Logo

Related Topics:

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Starlite Televison & Video Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Ed Mac

Level 3 Expert

731 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you a Starlite Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...