Question about Computers & Internet

1 Answer

Hello mate!! i did'nt mean too keep you hanging,but tonight i'm getting drunt,i'm mixing seven up with my beer!! half and half,its prety good you should try it sometime! and it makes your beer last longer. will i'm going to do as you sugjest,but not tonight. have your self a good one,i'll contact you later mate,i'm going to log off for now,best wishes, davidstraschewski@ymail.com

Posted by on

  • davidstrasch Sep 06, 2009

    yes i'm trying to run a custome firmware onto my psp.my psp has a G DRIVER i can transfer this file to the G DRIVE of the psp.but when i go to start and click on my computer then click file,then click on G DRIVER and bring up this file program i click on run and an error message pops up saying: G:/_SE-A-BUILD2.exe is not a valid win 32 applcation what ever that means,all i know is that the program will not download into my psp.what can i do? do i have to find a custome firmware with win 32 application abilities or compatabilities,and if so can you think of one that has what i need and is user friendly so i can download its program onto my psp! thank you. davidstraschewski@ymail.com

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 346 Answers

Sounds like you found your solutions. I expect I will get a refund issued on this one too. Have fun!

Posted on Sep 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beer system won't pour properly


Most of the time this reason is the beer temp and co2 is not right. first you dont go buy box temp but need to get beer temp. first make sure you have a calibrated thermometer. check your thermometer by mixing up a glass of ice and water let it stand a couple Min to achieve 32deg. put thermometer in water let stand 2 min to make sure it reads 32 deg. now draw a couple of glasses of beer in the same cup pour each in a pitcher. now draw a 3rd glass of beer in the same glass put the thermometer in it you wont the beer at 38 deg if to cold turn your box thermostat up or if to hot turn your box thermostat down to achieve a 38 deg beer. now it is time to check the CO2 pressure, you wont it at 12 psi. first drink a couple glasses with your friends this will let your keg pressure equalize. Now it is time to do a test poor. If the faucet gives a spurt of foam when you open it or the beer runs foamy-clear-foamy-clear than the pressure is too low, bump the pressure up 2 LB and let the pressure equalize a few min. If the beer runs to fast, turn off the co2 at the shut off where the tubing connects to the regulator (Always turn off the shut off when adjusting the regulator). Release some pressure from the keg by pulling the pressure relief valve on the keg coupler. Drop the co2 pressure 2 lbs. Turn the co2 line back on and let the pressure equalize. Often you can tell if the pressure is too low by looking at the beer line at where it connects at the keg coupler. If you see bubbles rising up the beer line from the coupler the pressure is to low or the seal on the keg or coupler is bad. Over many years of trouble shooting 3/16" bore shanks and fittings can cause a burst effect releasing carbonation from the liquid. The beer flow looks good but you end up with a glass half full of beer and half foam. For this reason 1/4" bore shanks and fittings should always used on the liquid side.

Mar 04, 2014 | Scotsman Kitchen Appliances - Others

1 Answer

Despite all the effort that I put into making it, my beer turned out terribly. Should I just throw it away?


I would hang on to it. Sometimes a bad beer can turn into a good one after a few months. If by then it's still not ok, then you should just chuck it out.

Feb 21, 2013 | Crafts & Hobbies

1 Answer

What is a beer shandy?


A shandy is a beer mixed with juice or soda. This concoction originated in England where they were traditionally mixed with lemonade. Americans adopted this idea and started mixing their beer with sprite

Feb 03, 2013 | Wine & Spirits

1 Answer

Trans fluid is low(pink and foamy) must increase the revs. to ingage gear .Now I see coolant coming out the overfow that is mixed with tranny fuid.


your radiator has gone bang.the radiator is devided in two.1 half is coolant and the other half is trans fluid.the trans fluid runs through the radiator to keep it cool before running through the gearbox.whats happened is the shelf inside your rad has collapsed and your coolant has mixed with the trans fluid and gone into your gearbox and vice versa.expensive job,whole strip down sorry to say mate

Oct 15, 2009 | 2003 Dodge Neon

1 Answer

Nintendo Wii keeps on turning itself off? I thought it was the fuse on the plug but it isn't. It overheats and cuts out after an hour and half.


should you play a game for more than 90 minutes i mean its a prety new system and still fixing ''klinks'' and stuff so respect that you can even play it.

Jul 13, 2009 | Nintendo Wii Console

1 Answer

Where can I buy a replacement Miller's Choice Bread Maker Pan please?


The Swan fastbake bread maker is the bestBread maker that I have ever owned. Now I will let you into a sad secret I own five breadmakers at present, Panasonic,Hinari,Morphy Richards,and a Crown. The Swan comes up trumps every time.The auto nut dispenser is a nice touch.The pan makes a good size family loaf ideal for the beginner and for the more adventurous amongst us a fully individual program setting for doe mix adjust heat and mixing times. The bread comes out just as you would expect to see a loaf at the bakers but without all the rising agents and various additives that are supposed to keep yourbread fresh for `seven` days. Seven days, I have trouble keeping the bread seven minutes once the family tribe get the scent of fresh baked bread.

Jun 19, 2009 | Kitchen Appliances - Others

1 Answer

Tone arm trouble i think???


this is a damaged tone arm bearing i had this problem with mine and had no choice other than spending £50 on a new tone arm

Mar 08, 2009 | Technics SL-1210 Turntable

3 Answers

HAIER BEER REFRIDGERATOR


I have this same problem.  I have read discussions on this exact topic in several forums, and I have come across a link to a Haier Service Website.  http://service.haieramerica.com/  When you go to this site login with password "HAIER" and UserID "HAIER" and look up your model number (my model number is "HBF05EABB)".  There is a "service bulletin" which provides instruction/pictures for adjusting the thermostat.  I have not tried this yet, but I intend to later tonight.  I like my beer a little cooler than 41 degrees!  Hope this helps.

Oct 26, 2007 | Haier (HBF05EAVS) Beverage Dispenser

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...