Question about Computers & Internet

Open Question

I-Inc CY199D firmware

I've got the exact same problem with my I-Inc monitor. My understanding is that it needs firmware upgrade. I could program the EEPROM if I had the file from a good one. I have seen offers for chips, but no details on how to get the chip or the file to program my own. I hope that someone who has fixed this problem will respond.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kenezz6396
  • 64 Answers

SOURCE: I-INC CY199D lcd monitors will not turn on or off

find a electronic repair shop and ask them look up the ic number. if they they can read the program of of the old chip, they can put it on a new eeprom. somtimes the chip wont work but can still be read..


also have tried to find the board it self on a lcd parts web site? http://www.lcdparts.net/
\
also you may want to see if ebay may have a scratched up monitor of your or one they has a power supply problem.

Posted on Aug 11, 2009

  • 4 Answers

SOURCE: I-INC CY199D EEPROM failure

Hello, The EEPROM needs to be replaced and your problem will go away. I have one and replaced it in mine and it works fine now.

Posted on Jan 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How I can recover emv400 after power disconnecting during firmware upgrade


You are never allowed to disconnect power during firmware upgrade. If you do, there is no way to recover from it, except to unsolder the firmware chip and install a new properly-programmed chip.

Oct 31, 2013 | EverFocus emv400w-500, 4 ch, 500 gb,...

1 Answer

NEED UPGRADE DRIVERS FOR I-INC 28 MONITOR


try this link to download the newest driver

http://www.driverstart.com/start698262.html

Apr 10, 2010 | Hannstar I-Inc TW-191D Monitor

1 Answer

My samsung dvd writer is reading cds but not dvds what should i do


Caution: Samsung is not responsable for problems during the firmware upgrade.
When you encounter problems during the upgrade, please contact a Samsung Service Center.
If your drive is still in warranty please contact your retailer first. When you upgrade your firmware, please check the "Buyer" on your label of drive.
If you upgrade wrong firmware, you will have a problem in operating.
ex) SM-332B/*** 63BT123456 F/W=T403(***=Buyer)
■■ How to upgrade firmware ■■ 1. Download the attached "Bin file(firmware)" and "Sfdnwin.exe file(download
program)" into a temporary folder. 2. When you run "Sfdnwin.exe", Pop-up window will appear. you can see your ROM-
drive(s) in the Pop-up window.
Then choose the drive whose firmware you want to upgrade.
ex)Drive:SAMSUNG CD-R/RW SM-332B/T403 3. You will see three icons on the top from left.
If you click the first icon from left, you can see "Investigation window" then open
the firmware file that you already downloaded to the temporary folder. 4. You will see the message" Ready" after finding the firmware file that you want.
Then click the middle icon on the top of left. Then your firmware will be upgraded
automatically. 5. When you finish upgrading firmware , reboot your pc automatically.
■■Sfdnwin.exe : A program which can make your drive download our firmware(s) in Windows.
(It's for only Windows)
I had the same exact problem and thought the ROM was broke but it still played CD's. It's funny because when the problem started I thought I had really messed something up, and it turns out there are massive forums like these for the exact same problems. I hope I can ease a few minds w/ this. I'm running Windows XP, 1G ram, 100GHD.

Jan 31, 2010 | Samsung SD-616 (cddvd-40081) DVD Drive

2 Answers

I-INC CY199D EEPROM failure


Hello, The EEPROM needs to be replaced and your problem will go away. I have one and replaced it in mine and it works fine now.

Jan 22, 2010 | Computers & Internet

1 Answer

Adriananders


If Anyone is interested in EEPROMs or exchange repaired graphics cards my email address is bruce-anderson@virginmedia.com

Dec 24, 2009 | Hanns.G Corporation JW-199DPB 19" LCD...

1 Answer

I-INC CY199D lcd monitors will not turn on or off


find a electronic repair shop and ask them look up the ic number. if they they can read the program of of the old chip, they can put it on a new eeprom. somtimes the chip wont work but can still be read..


also have tried to find the board it self on a lcd parts web site? http://www.lcdparts.net/
\
also you may want to see if ebay may have a scratched up monitor of your or one they has a power supply problem.

Aug 11, 2009 | Computers & Internet

9 Answers

My web cam (Creative Labs,inc.model No Vf0330 ) is not clear work and i want its installing software


You can download the drivers you need here

http://support.creative.com/Downloads/searchdownloads.aspx?filename=WCVI_0330_PCDrv_US_1_11_01.exe

Apr 22, 2009 | Computers & Internet

3 Answers

I-INC CY199D lcd monitors will not turn on


I have sucessfully repaired three I-Inc CY199D monitors which all had the same problem.
The monitors program is stored in a 24LC16B which is a 16K serial EEPROM in a SO8 package.
The bad part is you have to remove this eeprom to program it as it is write protected on the board and you will need a serial EEPROM programmer and an uncorupted program I have all the above.
If there is enough interest I could offer preprogrammed EEPROMS or a repair service for the graphics card..

Dec 05, 2008 | Computers & Internet

16 Answers

I-INC CY199D lcd monitors will not turn on


The problem is the program for the graphics card is stored on a 16K serial eeprom which is used as a rom this can get corrupted which causes the problems you are experiancing.
I have repaired three of these monitors by re-flashing the eeprom with a program cloned from a working monitor all worked fine after refashing.
Now the bad news as the eeprom is used as a rom it is write protected on the board so the only way to program it is to remove it flash it with a valid program and then replace it easy if you are a surface mount expert.and have a serial eeprom programmer.

May 31, 2008 | Hanns.G Corporation JW-199DPB 19" LCD...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...