Question about Siemens SpeedStream 4200 (13A4200001) Bridge

1 Answer

On/off switch I reckon the on/off switch in this modem I have opened for a mate is dodgy - where can I find the schematics? Or conversely, of the three obvious solder points on the back of the card, which look like theyre off that switch, which would I solder a bridge the on/off switch out of the circuit altogether?

Posted by on

1 Answer

Re: on/off switch

Solder the two points on the back side of the switch together leaving the first one untouched. or desolder the switch and get a new one from your local electronics store.( I would do the latter)

Posted on Jan 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What to do if dsl light is blinking

This likely means that your DSL modem is not trained up with the DSLAM. - Geek talk for your modem is not connected to the phone company's equipment properly.

1.) Remove power from the modem

2.) Remove all devices (including the DSL modem) from all phone jacks in the house.

3.) Add the DSL line back to the wall jack, taking care to plug the wall jack into the correct jack on the DSL line. (Do not use a DSL filter on your modem!)

4.) Power up the modem/

Still not working? Continue...

5.) Try a different phone jack

6.) Try a new phone cable between the wall jack and modem

7.) Call the phone company for further assistance.

Dec 18, 2010 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

I have a siemens speedstream 4200 modem. It gets very hot to the touch, is it good to turn the modem switch off sometimes when you have your computer shut down?

Sometimes it's normal for some modems to be very hot. Make sure it's no in a very enclose space. And yes it's ok tp turn the modem switch off sometimes if you have to shutdown the computer. Just be sure to turn on the modem first then the computer in that sequence when you need to use them again.

May 08, 2009 | Siemens SpeedStream 4200 (13A4200001)...

2 Answers

Can't get a wireless router to work with a speedstream 4200

This may actually be an issue with your ISP. There is a good possiblity that your ISP has bound your connection to the MAC address of the network card on your computer. This is a common occurance which is why router manufacturers give you the option of having your router clone your computer's MAC address. Go into your router's management an perform the clone, sorry I cannot give you more details but I don't know the specific model of your Belkin router.

Jan 05, 2009 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

Can't get on internet!!

Usually you can keep the same modem. Who were your old and new providers? You should be able to go the the new providers website and get all the necessary settings to configure your modem to work on their service.

Jun 23, 2008 | Siemens SpeedStream 4200 (13A4200001)...

6 Answers

Placing Sppedstream Modem 4200 in bridge mode ...or if they have the gay firmware >.> go to http://speedstream/brgmode.html then click set your router to log in with your user information with a PPOE login...if your like me and using the dlg-4500 just go to setup and do internet wizard to set up easily...then your ready to go... it can take up to 10 minutes for your router to configure so give it time..and if it doesn't seem like it's working in that time...try cycling your power then check again...and if still not working, do a hard reset (hold reset till lights alternat from green to red) to reset to factor default (do it for your router too becfause it will still be set to sign into your isp for you)

Jun 14, 2008 | Siemens SpeedStream 4200 (13A4200001)...

1 Answer

D Link 604 will not connect to internet

Hi Goldy,

The 604 should setup easily. Make sure you have it set to automatically get IP if you are using Cable, and for PPPOE if you are using DSL.
Once you have it setup. Shut down everything. Plug in the modem, wait 2 min. This allows the modem to get the info it needs from your ISP. Then bootup the 604. Wait 2 min, for it to get the info it needs from the modem, then boot up your computers.
Got to start>run and type in CMD. In the black box that opens, type in IPCONFIG. Your IP listed should be 192.168.x.x. THe X's can be any number from 1 to 253. If the IP is, you are not getting data from the 604. Check your firewalls, expecially if you are using a third party one, like Norton.

Good luck!

Jan 06, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

I hate my server and their little black box toooooo!

If all of the lights go out or the DSL light stars blinking with no other light on then that usually indicates the modem lost sync. That is usually caused by noise on the DSL line. If the DSL line and phone line are on the same cables then you should have filters that need to be installed on every device connected to the phone lines except for the DSL modem. If that has already been done then you would need to contact you service provider as the issue is most likely going to be a problem with the phone lines in your house or their lines outside your house. Your ISP will be able to test your DSL line to get an idea of where the problem is. It is also possible that this is an issue with your modem and it needs to be replaced. Ig you are leasing the modem then once again you will need to speak with your ISP about it. If you bought the modem then you would need to contact Seimens about it if the modem is the problem.

Nov 28, 2007 | Siemens SpeedStream 4200 (13A4200001)...

5 Answers

Siemens Speedstream 4200 Driver

Visit this link On the left side under the heading Speedstream 4200 download and isntall both the drivers and firmware.
Once you've installed the firmware open iexplorer and goto . Type in an admin password and save settings. Type in your username and password ( provided by your isp ) press save again and then press connect. you should be in business.

Nov 09, 2007 | Siemens SpeedStream 4200 (13A4200001)...

Not finding what you are looking for?
Siemens SpeedStream 4200 (13A4200001) Bridge Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Network Bridges Experts

john smith

Level 2 Expert

366 Answers


Level 3 Expert

1061 Answers


Level 3 Expert

3283 Answers

Are you a Siemens Network Bridge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides