Question about Bell & Howell FB Series 2000D Flatbed Scanner

1 Answer

Bell & Howell 2000d fb adf tray will not go down after scanning

The tray will not go down after scanning for a half hour or so why?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Hi,

It may be the clutch on the left side of the ADF. there are 2 there, one does the pick roller the other the tray. you could try swapping them over and see what happens.

also the sensor sometimes sees the underside of the top of the ADF and thinks its more paper, therefore keeping the tray up. try running a perment black pen around the inside of the hole in the tray where you put the paper to stop too much light getting in. (dont colour in the sensor itself though!)

Posted on Sep 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i get hold of a Bell & Howell 9125DC scanner service manual?


PDF]Bell & Howell Parts & Service Manual for - Magna-Tech

www.iceco.com/B&H/B&H179.185.285.385%20SERVICE.pdf
SERVICE MANUAL. BELL & HOWELL. 179, 185, 285, & 385. FOR. INTERNATIONAL CINEMA EQUIPMENT. A Division of Magna-Tech Electronic Co., Inc.Missing: 9125dcscanner

Nov 18, 2015 | Bell & Howell Cameras

1 Answer

Bell & Howell slide projector 454


go on line to bell & howell site and down load service manual or operators manual.

Jun 09, 2013 | Office Equipment & Supplies

1 Answer

Error Code 2 on a Bell & Howell Copiscan II 3338A Path-Through Scanner.


02 - Automatic feeder time out. Ten seconds have elapsed since scan command was issued and no document has been scanned.

Place documents properly in the automatic feeder and press CLEAR key. if scanning does not resume, use the workstation keyboard to request a scan.

Jun 01, 2011 | Bell & Howell Copiscan II 3338A...

1 Answer

How to replace a worm gear on a Bell & Howell model 2585 16mm film projector.


Replacing the worm gear on a Bell & Howell 16mm film projector is a very long and involved process requiring a complete teardown. It is similar to replacing a blown head gasket in an automobile engine. The worm gear is the heart of the mechanism and takes a lot of time consuming labor just to get to it. In the process you lose a bunch of critical adjustments which require resetting with special Bell & Howell tools/jigs/gauges. Many of these projectors are at least 30 to 40 years old and will also require re-lubrication.
The gear itself costs around $30-ish and takes 3 to 8 hours of labor to replace. Richard Patchett in Michigan and International Cinema Equipment in Miami, Florida does the worm gear replacement.

May 04, 2011 | Video Game Consoles & Games

1 Answer

I NEED A OPERATORS MANUAL FOR A BELL & HOWELL 8MM FILM PROJECTOE MODEL 487A


Hi There, try the link below they have hundreds of manuals for Bell and Howell Cine Cameras.

http://www.ephotozine.com/equipment/manuals/bell-and-howell/10/Cine-Camera/4





Good Luck
lacala69

Apr 23, 2011 | Computers & Internet

1 Answer

Scanner is scanning slow


likely your resolution settings are very high, anything scanned at over 100dpi will take considerably longer. if it were a hardware issue then the scanned document would not be readable as the speed of the rollers must be sync'd with the scanning speed for a successful scan

Dec 09, 2009 | Bell & Howell B we Bell & Howell Spectrum...

1 Answer

One sided scanning is fine, but two sided scans have a 1/4 inch black line vertically down the left side. Cleaning does nothing.


When you say one sided scans are OK, are you using the ADF (auto document feeder) or the flatbed? Are you using the ADF for the two sided scan? What parts have you cleaned thus far? A little more info please?

thanks

Nov 11, 2009 | Bell & Howell Sidekick 1200

Not finding what you are looking for?
Bell & Howell FB Series 2000D Flatbed Scanner Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bell & Howell Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Bell & Howell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...