Question about Canon PIXMA MP160 All-In-One InkJet Printer

3 Answers

Error message no-5010 displays at the time of printing

When I turn the printer on it flashes the alarm light and also flashes E,4,2 in the display of the printer and also the fine cartridge holder does not move to the left side of the printer what i will do plz suugest as soon as possible

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Canon Master
  • 1,447 Answers

E42 22 = Scanner error

E4 = No ink

E2-2 = No paper (ASF)

please check this eror

Posted on Sep 04, 2009

  • Sazeed Computer
    Sazeed Computer Sep 06, 2009

    you rpinter scanner guide is jum please open scanner unite and some of drop oil there

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

Hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
Error message no-5010 displays at the time of prin - 75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

tokio-1

Posted on Sep 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

Hi,
This is what the user's manual said:

An error requiring servicing might have occurred. Turn OFF the machine,
and unplug the power cord of the machine from the power supply. After a
while, plug the power cord of the machine back in and turn ON the
machine. If the same error occurs, contact a Canon service representative.

To download this manual, use this link:

http://safemanuals.com/annexe_Easy%20Setup%20Instructions_CANON_PIXMA%20MP160-_E.htm

Good luck!

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon IP5200R printer. Green & red led`s flash 20 times, pause & repeat. print head will not come out of park position on righthand side. Fault occurred while printing a photo error 6500 displayed


Hello!

Error 6500 or green and red flashes 20 times, mean hardware error. Particularly, the Logic Board Assembly

There are two possible fix: first is to reset the printer's waste ink counter and the second is to replace the Logic Board Assembly (part # QM2-2733)
alpug_67.jpg


Reset the Waste Ink Counter:
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a
function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power
button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)

For technical help:
  • For toll-free technical support, please call 1 (800) OK-CANON (1-800-652-2666) during regular business hours (currently Monday-Friday 10:00 a.m. - 10:00 p.m. ET, excluding holidays).

  • Toll-free TDD Support Line for the Hearing Impaired is available Monday - Saturday (excluding holidays) at 1-866-251-3752
Hope this helps!

May 18, 2011 | Office Equipment & Supplies

1 Answer

I have an MP530 printer - error message 5C10 is


You could try resetting the printer:

1) On the panel, press and hold the <On/Off> button until the display goes blank (approx. 1 second). If the display does not go blank, unplug the power cord.

2) Wait approx. 10 seconds, plug in the power cord (if removed in previous step), press the <On/Off> button to power on the unit.

3) Wait for the printer to cycle through its startup routine before trying another print job.

I hope this helps!

Jan 05, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Both lights are blinking and will not print


they call that flash codes or error codes. please count
count how many times the lights flash, here is what they mean

Alarm / Power light flashes orange 7 times consecutively (ink cartridge installed incorrectly)

Alarm / Power light flashes orange 5 times consecutively (Print Head Error)

Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error)


Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error)

Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error)

Alarm / Power light flashes orange 16 times consecutively (This FINE Cartridge has previously been used)

Alarm / Power light flashes orange 15 times consecutively (FINE cartridge not recognized)

Sep 20, 2009 | Canon Pixma iP2600 Photo InkJet Printer

1 Answer

Printer will not print, error code 5010 is


5010 is a scanner error, either worn out scan lamp or sensors. Canon only replaces the entire scan assembly, if you like I can get part number and price.

Jun 23, 2009 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Error 22


1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Jan 28, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Won't print


Tell me about your computer and its operating system.

Sep 18, 2007 | Canon PIXMA MP160 All-In-One Printer

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1924 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...