Question about NorStar T7316E Corded Phone

1 Answer

Mbox locked on T7316

I am trying to set up my voicemail box and have managed to lock it. We do not have anyone at our office that knows how to set up the phone, so I tried to follow the setup sheet. I pressed the open mail button, entered the code1020000. It said I had to change my code, so I tried. then it locked and I can not do anything. Any suggestions?

Posted by on

  • 4 more comments 
  • sherring85 Sep 04, 2009

    feature 981 says pswd.

    I enter feature 983, then 1020000. I expect it to go to MBOX, but instead it asks for PSWD. I have tried 0000, 1111 and 1234.

  • sherring85 Sep 04, 2009

    That did not work. Is there any way to unlock the voicemail feature on my phone? I do believe we have the BCM50 system, as I found the manual for it. I called the administrator and he said the 266344 number is correct.

  • sherring85 Sep 04, 2009

    Yes attached, and no to the IP address. I am trying to call administrator again to get it. I will wait to hear from him, although I will be back here again Tuesday to get this done. Thank you for your help!

  • sherring85 Sep 04, 2009

    Yes. It says that my Mbox is locked and to contact admin.

  • sherring85 Sep 08, 2009

    Got it! Thank you so much for all of your help!!!!

  • george  peters
    george peters May 11, 2010

    when you press feature 981 does it say pswd or log?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

Sounds like you might have a BCM 50 Try feature 983, id:738862, pswd:266344. Hopefully the password wasn't changed.

Posted on Sep 04, 2009

Testimonial: "Thanks for not giving up. Got it!"

  • 2 more comments 
  • george  peters
    george peters Sep 04, 2009

    Is your BCM attached to your network? If so do you know the IP address?

  • george  peters
    george peters Sep 04, 2009

    also, did you try 0000, 1111, or 1234 on f 981?

  • george  peters
    george peters Sep 04, 2009

    darn, with the teleset programming for the vm turned off there's not much to do til tuesday. have a good weekend

  • george  peters
    george peters Sep 06, 2009

    Also try feature 983, id:738662, pswd:266344

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Nortel Networks system T7316. One phone has the mailbox locked out and says contact admin. I have tried the 120000 code and it is invalid. What else can I try?


Feature 983 log in is 120000 (if 2 digit extension, 1020000 if 3 digit, 10020000 if 4 digit extensions)
Select Mbox, enter that locked extensions mail box number, You will see password RESET. Select RESET. Release out. This will reset that mail box password to 0000. Use feature 981 on that phone and enter the new default password of 0000. you will then be prompted to change the password.



So in other words, try 1020000, 10020000, 120000

Feb 24, 2011 | NorStar T7316E Corded Phone

1 Answer

I'm locked out of the voicemail feature and I can't find a way of activating a new password to pick up messages. It's a Nortel T7208 system. Has anyone any ideas?


Feature 983 log in is 120000 (if 2 digit extension, 1020000 if 3 digit, 10020000 if 4 digit extensions)
Select Mbox, enter that locked extensions mail box number, You will see password RESET. Select RESET. Release out. This will reset that mail box password to 0000. Use feature 981 on that phone and enter the new default password of 0000. you will then be prompted to change the password.


Feature 985 will show you the extension of the phone you are using.

Feb 18, 2011 | Platinum Norstar T7208 Telephone

1 Answer

Nortel Voicemail Reset Password Problem


You have to make sure this is the wright mail box for that local The mail box should be the same as the local.From the main set press feature 983 password
120000 for 2 digit locals , 1020000 for 3 digit locals etc then press mbox press chg enter mbox no. next password press reset this will take in back to 0000 as mailbox password.

Nov 19, 2009 | NorStar T7316E Corded Phone

1 Answer

Auto attendent voicemail locked


Go to this phone press feature 983 this takes you to admin change mail box .The general mbox is 100 this is the mbox you want to change

Oct 09, 2009 | NorStar M7324 Telephone

2 Answers

Locked out of voicemail box!


Hi there, let me give this a crack at it...
The Telephone system sounds like a Norstar BCM... what Consultel1 gave you as an answer is correct, for a Norstar Key system.
OK, do all that Consultel1 stated: -> FEATURE 983 -> You will now see LOG:type in 738662 (SETNNA) and press OK -> You will now see PASSWORD: type in 266344 (CONFIG) and press OK -> then you will see the ADMIN and the options for MBOX, AA, OTHR
Now follow Consultel1 advise on changing Voicemail Passwords, from his orginal post.
Good Luck!

Sep 02, 2009 | NorStar T7316E Corded Phone

1 Answer

Mbox Locked - Feature 981


Feature 985 is used for resetting the administrator password.To reset a subscriber mailbox press feature 983, enter in log (default 1020000), on the 3 soft keys bolow the the screen press mbox,chng, enter extension number of the locked mailbox, press reset at the reset password prompt.press rls key

Sep 01, 2009 | NorStar T7316E Corded Phone

1 Answer

We have Nortel T7316. I have been locked out of the voicemail admin. I have tried all passwords I can think of but cannot get in. Please help


How do I reset a password on a Norstar Voice Mail mailbox?
Press Feature 983.
Enter the System Coordinator's Mailbox number (default is 12, 102, 1002, depending on length of extension numbers) followed by Password (default 0000).
Press MBOX.
Press CHNG.
Enter the mailbox number that is giving you troubles.
Press RESET. The password has been reset to default (0000).

Good Luck.

Aug 26, 2009 | NorStar T7316E Corded Phone

1 Answer

Want to erase a mail box


Norstar Voicemail for Call Pilot
**************************************************************************
Log In to System Administration:
1. Enter Feature 983 on a programming set
2. The display will show "LOG:", enter login password: "1020000"
3. Press the softkey under "OK"
4. Select the softkey under "MBOX"
5. Select the softkey under "DEL"
6. Enter the mailbox number (extension. you want to delete - 123)
7. Select the softkey under "Delete"

8. Press the RLS button to end.

Voila, now the mailbox is deleted.

May 11, 2009 | NorStar M7310 Phone

2 Answers

I have a problem with voice mail with a meridian hooked to NT5806DA-93. The system on voice mail every second pulse off so that only half of each message is played at a half second interval


Voicemail Features Norstar Common To Check Your Voicemail:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. From here you can listen to messages, change your greeting, change your password, etc.
To Leave a Message for Someone in Your Office:
1. Press the Leave Message key or Feature 980
2. Enter the mailbox number (extension number. of the person you want to leave a message for
3. The display will show the name of the mailbox owner, press OK
4. Leave message
To Access Your Voicemail box from Another Phone:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Press the OTHER softkey
3. At the LOG: prompt, enter your mailbox#(extension #. and your password all together followed by the "#" sign
4. Press the OK softkey
To Access Your Mailbox from Outside of the Office:
1. Call the main office number or your DID (if applicable.
2. If the call is answered by a receptionist, have them transfer you to your voicemail box
3. If the call is answered by the company greeting, or your personal greeting, Enter: * *
4. At the prompt, enter your mailbox #(extension #. and password all together
To Transfer Someone to a Voicemail Box:
1. Press the Transfer to Voicemail key or press the Feature button, then 986
2. Enter the mailbox # (extension#.
3. The display will show: Call Transferred
To Change Your Personal Greeting:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Press the REC softkey
6. Press the PRIME softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey to end your recording and then the OK softkey again to accept the new recording
To Record Your Alternate Greeting (Used when on vacation or out of the office.:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Pres the REC softkey
6. Press the ALT softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey to end your recording, then the OK softkey again to accept the new recording.
9. You then need to have your voicemail box now play the Alternate Greeting, Press the GREET softkey
10. Press the ChOOSE softkey
11. Press ALT softkey
12. Display will show: "Accept msgs: Y", Press the OK softkey to have your voicemail box accept messages while your Alternate Greeting is turned on, or press the CHNG softkey to change the "Y" to an "N" if you do not want your voicemail box to accept messages.
13. When you return to the office, make sure you go back into your voicemail box and have it play the PRIME greeting
Norstar Voicemail Administrative Programming Programming must be done from any M7310, T7316, or M7324 model phone set.
To Log Into System Administration:
1. Enter Feature 983
2. The display will show "LOG", enter your login password
a. If your company extensions are 2 digits long enter "120000"
b. If your company extensions are 3 digits long enter "1020000"
c. If your company extensions are 4 digits long enter "10020000"
3. Press the softkey under "OK"
To Create a New Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "ADD"
4. Enter the mailbox number (extension. you want to add
5. Mailbox type: Subscriber and then select "OK"
6. Extension: Usually the same as the mailbox number
7. Service Class: Enter 1
8. Name: Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma, and then enter the first name. When spelling the name, press # to move to the next character
9. Directory: Y (Yes.
10. Message Waiting: Y (Yes.
11. Out dial: Pool, enter 1 and then OK
12. Accept: 1, select OK
To Delete a Mailbox:
1. Log into the system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "DEL"
4. Enter the mailbox number (extension. you want to delete
5. Select the softkey under "Delete"
To Reset a Mailbox Password:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number you want to reset the password for
5. The display shows "Reset Password"
6. Select the softkey under "RESET"
7. Press the release key
*The new password will be "0000", the system will ask the user to change this the first time they log into their mailbox using this password.
To Change the Name on a Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number (extension. you want to change the name on
5. The display shows "Reset Password"
6. Select the softkey under "Next", keep hitting "Next" until the display shows the name
7. Select the softkey under "Chng" to enter a new name
8. Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma and then enter the first name. When spelling the name, press "#" to move to the next character
9. Select the softkey under "Next" to save the change
10. Hit the release button

Apr 15, 2009 | NorStar Lands Phones

6 Answers

Nortel T7316E


To reset passwords for Feature 983 do the following

Press Feature 985
Press 9
Enter 73738767793
Press OK

Now go back to Feature 983
Enter 120000 for 2-digit extensions, 1020000 for 3-digit or 10020000 for 4-digit

Aug 21, 2007 | NorStar T7316E Corded Phone

Not finding what you are looking for?
NorStar T7316E Corded Phone Logo

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...