- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
SAMSUNG GALAXY S5 - NO POWER, BATTERY, CHARGING AND CHARGER ISSUES
No power, battery, charging and charger issues
This guide contains troubleshooting steps and advice to help resolve issues you may experience when attempting to charge the handset.
After performing each step, please test to see if the issue is resolved.
Battery not charging
Battery is not lasting long
Phone won't charge
Failure to charge
Display remains black or blank
Are you using the correct equipment?Make sure you are using an approved Samsung wall charger and USB charging cable. Other brands of charging accessories may have different voltage parameters and could cause charging issues when used with Samsung devices.
Have you charged your phone for longer than 30min?
Leave your phone plugged in to the charger for about 30min without powering on. In some cases, it may take slightly longer for your phone to charge.
Is the battery icon displayed on the screen when charging?
After charging your phone for a little while you should get a battery charging icon appear on the screen which will indicate that your battery is charging properly.
If the charging icon appears, leave your phone for a little longer before you try to switch your phone on.
If however, the screen is blank and nothing is displayed, follow the below troubleshooting steps.
Is the charging cable plugged into a USB port?
Some charging cables can disconnect from the wall outlet adapter and plug directly into a USB port. However, when plugged into a USB port, the charging process is much slower due to the limited power output of USB ports. Instead, plug the device directly into a wall outlet to speed up the charging process.
Is the outlet faulty?
Try a different outlet or check for a switch connected to the outlet. If possible, try powering a different device on the same outlet.
Does another USB cable, or wall charger work?
Charging issues can occur if either the battery or charging cable is damaged. Verify that the charging contacts are clean. If necessary, clean the contacts using a cotton swab and rubbing on isopropyl alcohol.
If possible, test the charging cable by plugging it into another device and seeing if the device charges. Alternatively, try charging the device with a different cable. This may mean changing out the cable or the adapter on two-piece chargers.
If charging through a car charging kit, ensure that the car engine is running, and if possible try to charge other devices using other cables, through the same car kit. If none will charge, then it is likely there is a fault with the car charging kit. It is recommended to continue to cross-test devices, cables, and car kits until the problem device can be identified.
If the device charges when using a different USB cable or wall charger, the issue most likely lies with the charging accessory. In this case, follow the approved charger repair / replacement process.
Also, if the charger is connected via an extension or other multi-socket adapter, remove this and plug the charger directly into the wall-mounted socket. This will eliminate the possibility of a fault with the adapter.
If you are still unable to charge your device, continue to the next step.
Has the phone experienced any shock or exposure to water?
Accidental physical shock to a handset can sometimes cause problems to arise with battery or charger, as these components contain delicate parts, particularly. Damage can occur either to the component itself, or to the component's connection to the motherboard.
Water exposure can also lead to damage of these components, however due to the slow way in which this type of damage can manifest itself, the cause may not always be readily obvious.
With any physical damage of this nature, the only recourse is to contact the device manufacturer, and follow their approved repair or replacement process.
Fully charge the battery to maximize playing time. However, it
is not necessary to fully charge or completely discharge the battery
each time. You can charge the battery by connecting the jukebox either
to the AC power adapter (fastest) or to a USB port on the computer. The
battery icon in the upper right corner of the screen indicates the
remaining battery charge.
Connect the USB combo cable to the AC power adapter,
and then plug the power adapter into an AC power outlet. Or, you can
connect the USB combo cable to a USB port on the computer.
Plug the combo cable into the jukebox. Make sure that the
top of the plug (the side with the arrows) is facing the same direction
as the front of the jukebox. View Picture
If you are charging your jukebox from the computer's USB
cable, turn your jukebox off. If your jukebox is on, it cannot charge
from the computer's USB cable.
Note: If you are charging your jukebox
from the AC power adapter, you can leave your jukebox on as it charges,
but it will take longer to charge.
If the jukebox is on, the power cord icon appears in the
upper right corner of the display. The keypad's backlight turns on while
the battery charges, and then turns off when the battery is fully
When your jukebox battery is finished charging, pinch the
two side buttons on the plug, and then pull the plug out of the jukebox.
There are two things to check if the phone does not take a charge, even on a new battery. Try to check if the charger is okay by trying it out on another phone, if it is okay, then you do not have a problem with the charger but if it is not, then it need to be replaced.
Then the connection port on the phone is to be tested, and to test that, what you have to do is try to try a well tested okay charger on it to see if it will work, if it does not work then you need to replace the connection port on the phone.
What you are describing is that there is an issue with the USB charging port on your V3i. Different pins are used when charging via the wall as opposed to via a USB computer port. It really is quite common with the V3i, you can search on the internet to get your port repaired. If you cannot find anyone, feel free to ontact me, outlet3g in the repair directory.
New batteries are shipped partially charged. Before you start using
your device, it is recommended that you charge the battery. Some
batteries perform best after several full charge/discharge cycles. You
can charge the battery in two ways: • Charging the device’s battery by
connecting the power adapter. • Connecting your device to a PC via the
provided Mini USB cable. Note: Only the AC adapter and USB cable
provided with your device should be used to charge the device. Charging
is indicated by a solid amber light on the left LED indicator. As the
battery is being charged while the device’s power is on, a charging
icon will be shown on the title bar of the Today screen. After the
battery has been fully charged, the left LED becomes green and a full
battery icon appears on the Today screen’s title bar. Warning! Do not
remove the battery from the device while you are charging it using the
AC or car adapter. As a safety precaution, the battery stops charging
when it overheats.
When the low-battery warning appears, do the following: • Immediately
save your current data. • Synchronize with your PC or connect the power
adapter to charge the battery. • Turn oﬀ your device. Hope this helps, let me know if I can help you with anything else. JimmyC
don't worry try this i also got this prob but now it solved.you just follow these steps but still your problem not being solve then put in comment we'll go furthur
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
make sure the pins going to the usb port on it are all ok and they are not touching then, find someone with a similar D600 and relace your mem card and see if there is a difference, then try the battery and also note any difference. if its the battery, wich is likely, get it replaced, however there are cases of ic damage from faulty usb's, so if a working battery or mem/flash card dont work, send it to a repair man, after backing up all your personal stuff onto computer via BLUETOOTH.