Question about HP Photosmart 375 InkJet Printer

Open Question

Can not print from computer? I have a HP6300 three in one , i can

I keep getting a menue with faxing .

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i send a Fax how do i get a copy that the fax was Recived to the person i sent it to


You will get sound signal like longer beep. when you get three short beeps it means error (sent fax was not successful).
Also you can set XMIT report (means after every your sent fax, you will get printed out sheet with confirmation or error for previous sent fax - not recommended, will increase consumption of paper and toner).
If want to, follow steps:
- press key "Menu/Set"
- press "2" key
- press "4" key
- press "1" key (will see "trans: off")
- with navigation key "down" or "up" select "trans: on" or "trans: on + image"
- then press key "Menu/Set" to confirm it

Done

Feb 02, 2011 | Brother IntelliFax-2820 Laser Fax

1 Answer

I have an HP6300 Officejet. When I fax something it is received dark and illegible and with lots of vertical dark lines


I need just a bit of clarification... you mention that when you fax, this means to another person, and is it thier printer/fax that gets the lines? Or when YOU get a fax in to your machine? If it is yours, we can tackle that, if it is the recipient, it is thiers..... Please let me know and we can tackle it! Guy :)

Sep 23, 2010 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

HP6300 will not accept print jobs from HP computer it says no computer connection. Has prinyed in the past


hello
In this case please plug the printer into a different USB port and check for USB drive in device manager if it has red cross in it please enabel it or try to reinstall the HP prinetr driver.

Thanks

May 28, 2010 | HP OfficeJet 6310 All-in-One Printer...

1 Answer

HP Officejet 4500 keeps defaulting to fax mode


check the setting like menu look in there somewhere

Jun 05, 2009 | Office Equipment & Supplies

1 Answer

Fax In Memory


Hi Rick, had the same problem this morning. Solution: Press menu and the plus key below the lcd screen until you see 'memory reference' then press ok. Press the plus key again until you see 'print document', press ok. You can the select which fax to print that is still in memory.

Steve

Sep 29, 2008 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Brother fax 560


Try this: Press MENU, select FAX, then scroll down to REMAINING JOBS. If any jobs are displayed , you can choose to print them. To print from the fax memory, first exit out of the MENU functions totally. Then, press MENU,2,5,4. Next, press START. After all faxes in memory have printed, press STOP/EXIT button. Check REMAINING JOBS again, if it is clear, fax memory should be clear, Also.If the fax machine has a PRINTER function, press the JOB CANCEL button to clear the print Queue.

Apr 15, 2008 | Brother IntelliFAX 560 Plain Paper Fax

1 Answer

Cannon Print/Fax/Copier MP530


When this system runs low on ink it will not print any faxes. Instead it stores them to memory. If this is that case it takes more than 5 steps to print the fax and delete it (menu, scroll to memory item, ok, scroll to print, OK document, scroll to print all pages, ok, menu to go up, scroll to delete, ok to delete, ok to delete, menu to get out).

Worse, after a couple of these, the memory is mixed up. So, when you want to send a Fax, it will say "memory full" even though the memory is empty. You then have to power cycle the printer (hold down on/off for 1 second, wait 10 seconds, power on, wait for it to get ready (another 10-20 seconds).

Hope this helps.

Feb 06, 2008 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

How to print fax confirmation


hi,

from the main menu on the printer scroll down to "fax setup" or "advanced fax setup"

you have the option inside it.

thanks and regards
agnel

Feb 03, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Printing what is in memory


It probally wants ink to print the stuff in memory, if this has been corrected you can make it print from its memory or you can delete each file, it takes a little doing but this is what you need I think to do so you can free up the memory, to delete a item from memory, press menu, then scroll to a memory item, ok , scroll to delete, ok to delete, ok to delete, menu to get out quickly, standing on one leg :-)

You should be aware that this printer has a serious "ink low" behavior. When any ink cartridge is getting low (which still means a lot of ink left by the way), it changes the Fax reception model. Instead of printing your faxes as they arrive, it dumps them into memory. So, even though yellow (say) is low, it will not print your B&W fax!
It takes more than 5 steps to print the fax and delete it (menu, scroll to memory item, ok, scroll to print, OK document, scroll to print all pages, ok, menu to go up, scroll to delete, ok to delete, ok to delete, menu to get out).
Worse, after a couple of these, the memory is mixed up. So, when you want to send a Fax, it will say "memory full" even though the memory is empty. You then have to power cycle the printer (hold down on/off for 1 second, wait 10 seconds, power on, wait for it to get ready (another 10-20 seconds).
This means you either have to waste ink by throwing out cartridges before they are empty, or you have to deal with this mess.

Nov 29, 2007 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Brother MFC6800 not printing


To answer more effectively - how is the printer connected to the iMac? Is it a USB connection, a printer cable, is the MFC 6800 connected to a print server, an AirPor, etc? A second question I have is if you are trying any kind of tricky printing such as manualduplex printing.

Also, a shot in the dark...Is the Auto Reduction set to on or off? To check:
1. Press MENU/SET, 2 (Fax), 1 (Setup Receive), then 4 (Auto Reduction).

2. Press the up or down navigation key (keys located above and below the
MENU/SET key) until the display shows "Reduction: ON?".

3. Press MENU/SET.

4. Press STOP/EXIT.

Another item to keep in mind:
You can use three sizes of paper for printing your faxes and
copies---letter, legal and A4. When you change the size of paper you ha
ve loaded in the Brother machine, you need to change the setting for the paper size so your Brother machine can fit the incoming
fax on the page. To set the Paper Size:

1. Press MENU/SET, 1 (General Setup), then 1 (Paper Size).

2. Press the up or down navigation key to select LETTER, LEGAL, or A4.

3. Press MENU/SET.

4. Press STOP/EXIT.


Nov 20, 2007 | Brother MFC 6800 All-In-One Laser Printer

Not finding what you are looking for?
HP Photosmart 375 InkJet Printer Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...