Question about T-Mobile Samsung SGH-i900 OMNIA mit 16GB internen Speicher Cell Phone

Open Question

When i touch a screen at a place right side of that place gets ac

How to align screen

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mio moov 300 screen alignment problem


Download the user manual online and look for factory resettings. Follow instructions and it should work. On my Garmin, the same thing happened. On Garmin, you turn the unit off, press and hold the top left corner of your screen, and turn the unit on while pressing the top left corner of the screen. You wait for 10 seconds and a black dot appears and requests you touch it. The dot moves around the screen and you keep touching it. Once done, your screen perimeter is identified and all the letters fall in place when you press them. Good luck!

Dec 02, 2012 | SNK Mio Moov 300 GPS Receiver

1 Answer

I don't know how to install the cartridgre on my new printer J 3680 Could you please tell me how? Thanks,


Follow the instructions below to install the print cartridges for the first time. Installing print cartridges Step one: Install the print cartridges Follow these steps to install the cartridges.
  1. Open the cartridge door. The carriage moves to the far right side of the product. Figure 1: Open the cartridge doorc01133347.jpg
  2. Remove the new cartridge from its packaging and, being careful to touch onlythe black plastic, gently remove the plastic tape by using the pink pull tab. Figure 2: Remove tape from cartridgec01107115.jpg 1 - Copper-colored contacts 2 - Plastic tape with pink pull tab (must be removed before installing) 3 - Ink nozzles under tape CAUTION: Do not touch the cartridge ink nozzles or copper contacts. Touching these parts will result in clogs, ink failure, and bad electrical connections.Do not remove the copper strips. They are required electrical contacts. Figure 3: Do not touch the ink nozzles or copper contacts.c01107116.jpg
  3. Slide each new cartridge forward into the empty slot. Then gently push theupper part of the cartridge forward until it clicks into place.
    • Insert the tri-color cartridge into the left slot.
    • Insert the black cartridge into the right slot.
    Figure 4: Insert the cartridgec01107117.jpg
  4. Close the cartridge door.
Step two: : Align the print cartridge The product prompts you to align cartridges every time you install a cartridge. You can also align the cartridges at any time from the control panel, or byusing the software you install with the product. Aligning the cartridgesensures high quality output.
  1. Make sure you have letter or A4 unused plain white paper loaded in the input tray.
  2. Press OK. The product prints an alignment page.
  3. Place the alignment page print-side down on the scanner glass.
  4. Press OK to scan the alignment page. When the scan finishes, the alignment is complete.

NOTE: If you have colored paper loaded in the input tray when you align the cartridges, the alignment will fail. Load unused plain white paper into the inputtray, and then try the alignment again.

Sep 13, 2010 | Office Equipment & Supplies

1 Answer

My elo toch screen does not work right. when i touch it it is on the correct side from left to right, but it is opposite on the up and down. when i touch the top right side it shows in the bottom right...


Hello,

The calibration is off. Go to start and then control panel. In control panel you should find an icon for ELO calibration. Click this and start the procedure. The calibration will ask for you to touch several places on the screen in little circles with bulls eyes. After this the screen should be corrrect.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Mar 18, 2010 | Elo CarrollTouch touch-screen Monitor

1 Answer

Magellan Maestro 3140 touch screen alignment


I have the same problem. It seems the only answer is to purchase another GPS. I am looking at the Garmin 765T

Jan 05, 2010 | Magellan Maestro 3140 GPS Devices

2 Answers

Palm treo smartphone upon reboot gets stuck on "align screen"


yes u cant exit the screen until u do the align test for the touch screen its a easy fix on the back of the phone on the left side top there is a hidden pen that comes out of the phone and when u get the pen out use the point of the pen to touch the center of the circle on the align screen test it will ask u to do this in every corner of the screen after that the phone should get out of the align screen test and be able to work good luck

May 29, 2009 | Palm Treo 755p Smartphone

1 Answer

Align screen


ur Touch panel or in other word Digitizer is faulty try getting it replaced it is around 60 or 70 $ , if u dont want to spend money right now and just want to get rid of this screen alignment process just google 'bypass screen alignment ' there is a utility for that just connect ur pda using usb cable and bypass this process but u will not gett correct response when u touch the screen u will get mis aligned response if u want to get rid of this u have to spent money on hardware replacement

Feb 21, 2009 | HTC PPC-6800 Smartphone

2 Answers

Samsung sch-i730 touchscreen problem


use buttons to go to start,settings,system,screen then click align screen

Jan 17, 2009 | Samsung SCH-i730 Pocket PC

1 Answer

Convergence -manual


Replace the convergence amps and test and replace any or all of the 2.2ohm resistors in the yoke return path out in front of the amps. This unit takes two STK392-110 Sanyo originals, DO NOT GET CHINESE KNOCK-OFFS... Buy them from Acme sales out of Florida and you can be assured they're originals.
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993

Oct 11, 2008 | Toshiba 42H81 42" Rear Projection...

2 Answers

Touch screen not responsive


You need to re-align the touch screen using the following routine:

Accessing Alignment Mode:

cc951d8.jpg
Then you will see a text message something like
"Press + to align"

STOP

Don't touch the "+" in the text message !!!!!

The one you want will be elsewhere on the screen and all on it's own, with no text around it.

Using the non pointed end of a needle, or the spare spool pin (nothing sharp) gently but as accurately as you can, touch the centre of the +

The + will move to several more locations as it organises the height, width and orientation you give by touching the centre of the + as it appears each time.

When it is finished, turn machine off, then on as normal.

If this does not correct the issue, it may well be something else, so please, if you want any more help with this, just post back here, or, drop a line through the "Contact Us" page at www.bargainbox.com.au

Jan 06, 2008 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
T-Mobile Samsung SGH-i900 OMNIA mit 16GB internen Speicher Cell Phone Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top T-Mobile Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

SHIVAJI YADAV
SHIVAJI YADAV

Level 2 Expert

188 Answers

Are you a T-Mobile Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...