Question about Compaq Computers & Internet

2 Answers

My baby pulled the caps lock key off the lap top can i fix this at home

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,600 Answers

Try to snap one side of the key back in place and provide gradual pressure on the key rolling your finger to the other side snapping the other side in place. If the key attaches from top to bottom, the same technique still applies only bottom to top. Good luck, ParrotHead PC Repair.

Posted on Sep 04, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,603 Answers

These require VERY careful technique to re-install the keytops.

USUALLY they sit on top of a little "scissor" arrangement that have tiny plastic parts. Getting the little pivots back in place can be tricky and it can be easy to break the parts. You should be able to find somebody that can do it for you.

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WI FI AUTHENTICATION ERROR ON ANDROID TABLET


Double check your login credentials. Try checking the caps lock key when entering the password.

Dec 01, 2014 | Computers & Internet

1 Answer

How do i remove cover from an olivetti studio 44


The top cover comes off by pulling it forward from the rear forward.

Jul 18, 2014 | Olivetti Vintage Studio 44 Typewriter W/...

2 Answers

Why does my lap top freeze when I press Caps Lock or Numbers Lock?


You feel this as a result of running the processor fan , and This has nothing to damage your lap top.

Dec 12, 2012 | Dell Studio 1747 Notebook

1 Answer

I washed my daughters graco car seat and now i havent a clue of how to put it back together and i need re assemble it fast please help


Proper installation of a car seat is imperative to protectan infant. Accidents do happen and assuring that the instructions forinstallation of the Graco Infant Restraint/Carrier are followed will increasethe chances of preventing injury or death as a result of an accident. Graco carseats are a popular choice among parents due the availability of products atcommon retail stores, affordability and user-friendly baby gear.Graco Car SeatInstallation
Step 1
Plan to secure the infant seat facing the rear inthe middle of the back seat. If a center position is not available, positionthe seat directly behind the driver's side seat. For safety reasons, therestraint should not be placed in a position where there is an air bag. Ensurethat the proper vehicle lap belt system is in place; manually adjusted lapbelts, automatic locking retractor lap belts and lap/shoulder belts withlocking latch plates are all considered safe for use with the Graco InfantCarrier/Restraint.Step 2
Remove the carrier from the Graco car seat baseby squeezing the lever at the rear of the restraint and lifting the seat up.Place the base in the vehicle facing the rear. Thread the vehicle shoulder andlap belts through openings at the end of the base without twisting the belts.Secure the belts by placing plastic tongue over the belts. Tighten the vehiclebelts by pushing down on the base and pulling out any slack.Step 3Install locking clip to secure shoulder and lapbelt together just above the seat belt buckle. Connect the two belts with thelocking clip. Buckle the lap belt system and tighten by pulling out any slack.Ensure that car seat base is secure by pulling and pushing on it; the baseshould not move sideways, forward or backward.Step 4
Place the Graco carrier in the base. Push down onthe restraint until it clicks and locks into the base. Set the infant in therestraint for travel and place harness straps over the baby's shoulders. Clickthe chest place together over the sternum and lock the buckles into placebetween the legs.Tipsand Warnings
  • Contact local police departments, hospitals and fire departments to inquire about child car seat safety checks
  • Graco Infant Restraint/Carrier will not protect against serious injury or death if not installed properly. Always read the Graco owner's manual that comes with product prior to attempting installation and travel with an infant.

Jul 19, 2011 | Home

1 Answer

I'M TRYING TO URN OFF CAPS LOCK ON MY FUJITSU LAP TOP LIFE BOOK A SERIES BUT CAN'TSEE A CAPS LOCK KEY?


Just press the key with arrow pointing down, it is above the left shift key.
Hope this will help!

Sep 10, 2010 | Fujitsu Siemens LifeBook S7010D Notebook

1 Answer

My hp mini laptop fan grinds when the fan kicks on, I can push down on the caps lock key and stop it, but any movement of the lap top it starts back..


when u push down on the caps lock key you are stopping the fan because it is under the caps lock key..thats why when you move the laptop it starts back up..my sugjestion would be to replce the fan

Feb 11, 2010 | HP Mini 1000 Netbook

1 Answer

How do I reattach a caps lock key?


ok , so i had the same problem just now , and i fixed it , what you need to do is take of the little metal clip that attached to the key , place it in the little slot that are next to the retaner , then place the top part under the retainer , when you do this , the retainer will sort of hang upwards , then put the capslock key back and push it in , it will snap , gave me a headache to do , but it fixed mines , hope i helped you , if anything email me , jhoshuaryariza394@hotmail.com

Mar 09, 2009 | Compaq Keyboard

8 Answers

Caps lock


Open up an email, or something else you can type into. Click the menu button, and select "enable multitap." Then go back to the menu and select "enable suretype." That took off the cap lock for me. I just wish I knew how it turned itself on to begin with!

Feb 25, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Baby seats ( fitting inyour car with correct seat belt


all cars have lap seat maybe to top and the bottom of the belt are connected together but that our lap belt what kind of car i look at it for you thanks for using fixya pierre

Feb 09, 2008 | Baby Gear

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...