HI, I have a Nokia N73.The phone keeps scrolling up and down by itself and I am unable to call people or text them due this issue.This is happening since last night.Tried to do a master reset but have forgotten the Lock code.Pls help.

reinstall your phones firmware using nokia software updater. it will solve your problem.
good luck

hi, go to menu on your phone
click on applications...
click on OPTIONS
scroll down to MEMORY status
select phone memory.

cheers

hi, try the following steps:
1. go to profile
2.click any of your profile that you normally use i.e GENERAL, SILENT ETC
3.click on personalise
4. scroll down till you get to KEY PAD VOLUME
5. reduce it to what you want.
cheers

my nokia mobile is not working .it is unable to perfrom bluetooth operation .so i want solution

hi thanks for using fixya!!

The problem of your Nokia N73 is very common. Try to change your battery to anew. If you have already reset to factory settings, and still the same, all you have to do is to bring your phone to Nokia Care Centre near you to further check the software error.

If you need further assistance, let me know.

DEAR CHECK UR IMEI # IF ITS SHOWN 12345..........SO U LOST UR IMEI..IF U HAVE BACK UP SO UPLOAD IT

Hi,
check your message centre number..If its edited or deleted..u cant send or receive any messages..contact your operator for tat number..

It seems to me that u have some problem with ur key pad..so try to replace it..

Hi,
This is a common problem. But there is a solution for this problem.
go to Messaging. Then hit Options. Scroll down to settings.
Hit text message. Options - Then "Message Centres".
Hit the Edit button and the following number should come up:

+47973100973
Save it and try sending messages. If again the same problem exist then call up your customer care who provides the services of your phone like Airtel, Reliance etc.. Ask the message center number and follow the above steps and save that service center number. Hopefully it should work. Thank you......

This may work for you as it did for me. You need to upgrade the software.