Question about Maytag MAH6500 Neptune Front Loading Washer w/Built in Water Heater

1 Answer

Maytag neptune washer hot water fill problem

Maytag neptune washer
hot water continues to fill even during spin/drain cycle, results in extra water in unit/spillage b/c water can never drain all the way
cold water ok, ie if i turn off hot water valve at wall, then no problem
how do i check the hot water valve in the unit or other troubleshoot tips

Posted by on

  • Anonymous Mar 23, 2014

    Wires leading to valve cellinoids (hot and cold) have power until they are connected to the cellinoid

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 222 Answers

Replace the valve

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eratic, sometimes door lock doesnt activate, when it does wahser starts but stop mid cycle and wont continue. Replaced door switch and pump


Repair needed on Maytag Neptune washer - Home Improvement ...

www.dslreports.com > ... > Home Improvement

DSLReports
Aug 5, 2007 - 19 posts - ‎8 authors
Forum discussion: We have a Maytag Neptune front-loader washing machine that ...the drain/spin cycle after a wash even though the timer continues to ... related circuit board failure" their Neptune washer will lock the door, turn on the ... then will either not start tumbling or will stop operation mid-spin cycle.

How To Fix A Washing Machine That Is Not Spinning or ...

removeandreplace.com/.../washing-machine-or-washer-dryer-is-not-spin...
May 13, 2013 - The absolute first thing to do to your washing machine that will notspin or drain (whether it. ... I was so fed up with the machine sometimes refusing to spin or drain the .... I just did a load and it stopped midcycle with e and f error codes.... I tried different cycles but all that happens is the door lock engages ...

Maytag Washer Troubleshooting - YouTube



Dec 02, 2015 | Maytag Washing Machines

1 Answer

My Maytag Neptune will not go into the spin cycle, instead the letters "nf " come on the display. What can I do to prevent this and to have the cycle completed?


Bonnie,

NF = No Fill the control board receives signaling for the washer during the water fill cycle. With most cycles the depth of water is around 3.5 inches in the wash basket. I know a Bulky Wash cycle selection will fill the wash tub to a high fill which is about 7.5 inches of water in the wash basket.

Is the washer filling the machine with any water? Do you hear water entering the machine? If you are doing a cold water fill and there is no or very little water in the wash basket with the NF error code. Try a Warm or Hot fill and see if the machine will fill and start the wash cycle.

Assuming you are doing cold water wash loads. You could have a water line block at the inlet screen or a failed cold water inlet valve which will not open. Try the above and let me know the results..........Rich

Sep 13, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytage MAH6500AWW Overloaded washer now leaks when filling


since you can drain it
take off the back and watch what happens when u turn it on
i believe you make have a loose drain connection

Oct 09, 2009 | Maytag MAH6500 Neptune Front Loading...

1 Answer

My Maytag Neptune washer continues filling with water e


Does it fill when the machine is powered down?

If it does then the fill valve is stuck open and needs replacing

If it does not then you need to check the pressure switch and the air bell on the outer drum which probably has a ball of jellyfied soap in it.

If you take the back off you will see a thin plastic or rubber hose going from the bottom of the drum to a small flying saucer type object.

If you pull the hose off the bottom connection and blow into it you should hear a clicking noise from the pressure switch.

If it clicks then clean out the air bell and refit the hose .

If it does not click then get a new pressure switch

A repairman would test it live but that is not recommended for untrained people

Jun 22, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

MAYTAG NEPTUNE MAH9700AWW continues to fill on rinse, code "oe",


if the water continues to fill even with power off, and you have to manually shut in off at the wall valve, the 3-way inlet valve is stuck open. you have to replace it. $90

Mar 02, 2009 | Maytag Neptune MAH9700 Front Load Washer

1 Answer

Water will not shut off, continues to fill


does the water run when you unplug the machine? if so then you have a bad fill valve,

Nov 02, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

SPIN CYCLE


need more information is it top load or front

Nov 19, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Maytag MAH6500 Neptune Front Loading Washer w/Built in Water Heater Logo

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

588 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...