Question about Washing Machines

3 Answers

I am selling my home and the buyer's inspector was in and ran my Maytag Neptune washer - when I went to use it today - it sounds like it is running, but the tub does not fill - clothes are dry - and the screen reads "nF". Any thoughts?

Posted by on

  • teresa329 Sep 04, 2009

    the water seems to not be coming into the machine - I've open/closed the valves and it still doesn't seem to fill - guess I'll have to find the inspector and asked if he changed any other access to the water. could it be anything else?

  • teresa329 Sep 06, 2009

    water supply is on - cycle starts and then stops about 1/2 way through and nF code comes on screen where time for cycle usually is. Any other ideas that could help? Thanks for any insight.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 430 Answers

The fix was simple i just had to lift my drain hose off the floor. it had become disconnected from the back of the washer and was lying on the floor. I didn't realize that by it lying on the floor it didn't provide the proper back pressure to keep the water in while filling the tub. this was the NF error.

Posted on Sep 06, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Check and see if they turned off the water

Posted on Sep 04, 2009

  • Roberta Smith
    Roberta Smith Sep 04, 2009

    if you look at the back of the machine you should see two taps. one is hot water one is cold. if they are not obvious, follow the two hoses from the machine. there has to be shut offs for both taps nearby.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 864 Answers

Check to see if the inspector turned the water supply off.

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle are running to long


FIXED Maytag Neptune, Timer Problem - ApplianceBlog

www.applianceblog.com/.../23387-Maytag-Neptune-Timer-Problem

Mar 4, 2011 - 8 posts - ‎3 authors
My countdown timer is stuck at the 33-minute level in the "wash cycle", and repeatedlyruns for a 30-40 seconds, then stops, then runs, then ... Maytag Neptune TL Washing Machine stops in spin cycle ...
10 posts
Jul 25, 2013
Maytag Neptune Washer Won't Spin/drain
7 posts
Jul 4, 2013
Neptune TL Washer FAV6800AWW - DC and UC ...
5 posts
Jul 3, 2007
MAYTAG NEPTUNE WASHER CONTROL PANEL ...
8 posts
Jun 29, 2005
More results from www.applianceblog.com

Troubleshooting a Too-Long Wash Cycle - whirlpool washingmachine ...

ask.metafilter.com/233920/Troubleshooting-a-TooLong-Wash-Cycle
Jan 25, 2013 - We have a Whirlpool Duet washing machine (about 2 years old). Thecycle is taking WAY too long to complete. The load that's running now ...

Maytag Neptune washer repair: motor/motor control circuit ...

? 12:10
https://www.youtube.com/watch?v=ITTbDh8CFEU
Dec 11, 2013 - Uploaded by daytonaturbofreak
Maytag Neptune washer motor/motor control circuit board ... my board just fried - is your washer still working? wondering how longthe conversion fix will last. ... Other times it will run a completecycle without any malfunctions.

Jan 11, 2016 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

How do I clean the mold smell from a front load neptune HE washer


some people use vinegar and water and run a hot wash with the unit empty i have found that when cleaning out any smell in a washer whether it be stagnant water smells or mold the one thing that works the best is a product they sell at home depot called AFFRESH it comes in two types one for the front load washer and another for dishwashers simply just add one tablet to your hottest wash without any clothes for heavy mold sometimes il run it twice with two tablets separately it sells for about 8.99 per package and is a life saver of all front loaders if you have any further questions message me back and please remember to rank how this opinion has helped in your appliance situation this way I can keep helping people who have similar situations with there appliances Thanks again Rick

Jan 16, 2011 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

LR CODE ON A NEPTUNE 55OOBWW WASHER


Hello there:
The LR error on your non-spinning Maytag Neptune is usually, thoughnot always, accompanied either by a burn spot or a blown fuse on theMotor Control Board.
Burn Spot on a Maytag Neptune Washer Motor Control Board (click to enlarge)
Blown Fuse on a Maytag Neptune Washer Motor Control Board (click to enlarge)Either way, it means just one thing: a new motor and motor control board kit are in your future.
Hop this is very helpful for you
Best regards Michael


Dec 29, 2009 | Maytag Washing Machines

3 Answers

Home Inspector detected gas leak coming from inside Dryer


The main valve in the burner may be leaking a little--if so, the valve assembly will need to be replaced. Did the repairman detect any gas as the home inspector did? Make sure the machine is level and does not rock in any direction that might fracture or loosen the incoming gas line. Have the gas supply company check for leak.

Aug 28, 2009 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Timer Problem for the Maytag Neptune Front Loader Washer.


could be as simple as unplugging it for 10 seconds to reboot the control.

Oct 19, 2008 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Repairing leaking Maytag washing machine


Maytag Appliances are ****!! Don't buy Maytag. Spent $2500.00 in 2005 on Maytag Neptune washer and dryer. They have been nothing but trouble. Washer has water running in tub constantly. Recall on ground and recall on footing. Dryer making loud noise when drying clothes.The Maytag man is dead and gone.

Aug 14, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag Neptune MAH6500


Sounds like some sort of broken support or spirng underneath. Flip it over and look. Expect a little water to run out though.

Feb 28, 2008 | Maytag Neptune MAH6500A Front Load Washer

2 Answers

Maytag Neptune on/off button wont stay on


You have to investigate where the burning smell came from. Start at the timer and then check the main board. Also check the drain pump.

Oct 23, 2007 | Maytag MAH6500 Neptune Front Loading...

1 Answer

Maytag Neptune


the main control board could be bad, i dont want to tell you to replace it as it is expensive. call maytag and see if you can bring it somewhere to test.

Jul 15, 2007 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Brad Brown

Level 3 Expert

15729 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...