Question about Whirlpool LSR5132PQ Top Load Washer

2 Answers

Washer runs but stops completely after a few minutes. Will not go into drain/spin cycle.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 744 Answers

Hello, Your problem is going to be with your lid switch, this is located normally either in the control panel or about half way down on the right side under the lid. Once you have located the switch trace the wires back to the wire harness in the control panel. Disconnect the lid switch from the wire harness and with an ohms meter check for condinuity on pin 1 & 3 (the 2 outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good Luck!! Mike

Posted on Sep 04, 2009

  • Mike Price
    Mike Price Sep 04, 2009

    Ignore the timer comment, timers rarely go bad and would effect not just the spin or drain. Mike

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 555 Answers

Sounds like your washer got a broken timer.

If your appliance still under warranty, you can contact the manufacturer for assistance in repairs.

Good luck !

Posted on Sep 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer stops during normal wash cycle for a minute or more, and then continues. Would replacing the timer fix it?


If it actually goes on and finishes the cycle and that really bothers you replace it. If not leave it alone and allow a little more time to complete its cycle. The lid switch only keeps the spin cycle from going with the top open.

May 23, 2014 | Whirlpool Washing Machines

1 Answer

Kenmore washer stops spinning a few seconds in to the cycle.


Sounds like the brushes are struggling to get enough power to the motor to spin. Renew motor brushes

Apr 21, 2012 | Kenmore Washing Machines

1 Answer

Washer will not complete cycle and drain water


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Jun 06, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Washing is not draining completely. I then try to...


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

May 19, 2010 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Standing water in the washer hours after wash cycle completes


YES..I think drain hose @ sink too low Waste water from sink entering machine...Raise pipe....tie up ....

Apr 09, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Will not complete a wash cycle or rinse cycle, stops short


I think it maybe your lid switch. If the lid switch is out it will not spin and sometimes spin or drain. can you give me a model number so that I can further assist you?

May 12, 2009 | Washing Machines

1 Answer

Please help


it is the timer or, it may be a short of some kind

Apr 19, 2008 | GE WDSR2080D Top Load Washer

1 Answer

Washer code


the drain sump area is clogged axcess through front panel. F02 is telling you its taking too long to drain the water pretty soon it wont drain at all.

Sep 29, 2007 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?
Whirlpool LSR5132PQ Top Load Washer Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...