Question about Abit AN8 32X Motherboard

1 Answer

Voltage Problem Hey guys, I got a problem just for the first time. I rebooted my computer recently, which mean i reinstall window xp pro. I finish installing everything from drivers to updates. I went to school came back power on the cpu and bam the computer start beeping like forever. The uguru pops up and say voltage 1.38 and then shutdown the computer. To avoid this i close the program before it even try to run or pops up. It is still beeping now and driving me crazy. I experience this only when it comes to the summer time when the cpu get really hot and this time of year it's december which is freezing down here. I thought 1.38 voltage was normal?. A little advice would help guys. I already post this on the official amd support, but they haven't responded. Alright guys thanks

Posted by on

  • ok33 Dec 09, 2007

    Thanks figure it out myself, sorry i didn't tell you sooner. For those who had the same problem i'll tell you. First you go into the BIOS, then go into the uGuru Utilities, then the go into the voltage section press F10, save and reboot. That should do the job with the default setting. Thanks anyways Tom.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,601 Answers

µGuru load default Settings

Turn ON your PC with our µGuru™ motherboard and then turn OFF right away as one single action; repeat this action continuously for 3 times.
Now you have set µGuru to a load default setting!
Thank You

Posted on Dec 08, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Yes expert ntldr missing


It means that your computer is missing a file that windows xp needs to run boot properly or is missing a program that your home edition xp needs. Repairing the OS or windows xp home edition by means of your xp instalation cd will do the job. Just insert your xp installation disk to your cd/dvd rom and select install windows xp home edition. Then select ( repair ), and so on let it finish repairing . Once your system rebooted, let it run without pressing enter or space bar. Just watch and let your computer do the job. This will probably solve your boot problem. But before doing all of this, please check your IDE or SATA cable and also the power cable that is connected to your hard drive. Try to unplug and plug again to ensure a good connection. If this won't work, you can proceed repairing Your windows xp installation or reinstalling a new xp operating system. Have a nice day and i hope i was in any help to you friend.

Aug 18, 2011 | Microsoft Windows XP Home Edition

4 Answers

Get Windows XP SP3 Product key.


The product key should be on the certificate of authenticity that is included on either your computer case or the packaging of your windows xp disc.

Mar 12, 2011 | Microsoft Windows XP Professional SP3 Full...

1 Answer

I recently bought TATA Olive VME101 Dialer. The guy from TATA Photon installed it on Windows XP Professional but I was not getting proper signal. It worked hardly for 15 minutes! So he uninstalled it......


same problem i had faced in Windows XP. follow this procedure.
uninstall previously installed driver. restart your computer. wait till win xp finishes booting. then plug in the modem. Check whether device is recognized as CD drive in your computer. cancel the find hardware wizard. double click to open the newly installed drive and run set up.exe. after installing unplug the device.reboot the computer and plug in again to enjoy the internet.

Dec 21, 2010 | Computers & Internet

1 Answer

Display blanks after installing drivers


Try the final AMD Display Driver (version 8.31) downloaded directly from AMD for the Radeon 9250 series running in XP. It will be several years more recent than any provided in Windows XP (by Microsoft), and may just fix your problem. The fact something causes XP to identify your Radeon 9250 as a 9200 Pro shows that something is not right. You might also want to launch Device Manager, use the option to show hidden devices, and delete any "ghost" video cards. I suspect a 9200 Pro may be a ghost, which could be causing problems.

Sep 13, 2017 | GeCube Computers & Internet

1 Answer

Windows xp pro


Did you reinstall windows, or install another operating system? Have you placed your windows disks in your computer recently? To add files or possibly drivers?

This is in your ROOT boot up .ini file, which shows that loading screen, also there is an option that has blocked shutting down your computer. I can help you get to shutdown, is this a laptop, is this a home computer? Did you recently place this unit in the shop. All of these answers do matter for me to give you assistance.

ManOwar

Aug 07, 2008 | Dell Dimension 2400 PC Desktop

1 Answer

I can't reinstall windows XP Pro the sistem say have an error


Hey there

Please specify me the details of ur problem.
I'm actually not getting ur problem exactly.

Gimme the eerror detail about does ur XP installation continue for a while, formats the drive, copies the file or not doing anything with exact problem causing you not to install XP.

Send me detail soon, so that i will be able to help you further

-
Romy

Aug 04, 2008 | AMD Chaintech ZNF3-250 Socket 754...

1 Answer

Windows xp pro sees the fuji FP-988D as generic plug andplay


Hi...there,

Hey...guys! You don't need any drivers for this Fujiplus FP988D.
It's a plug and play...just plugs in any computer...it's automatic searching for the right setting. Have a nice day!

Jul 09, 2008 | Fuji FP-988D 19" Flat Panel LCD Monitor

2 Answers

How can I install window xp to Satellite A205-S5825


First, i'd check with Toshiba to ensure that they have Drivers available for that unit in windows xp. Also, check to make sure you still have the recovery disks that come with the unit in case you do wan't to go back to Vista.

First you would need to buy the full version of windows xp wich tends to retail for $199. You should be able to follow the directions on screen once you insert the disk and reboot. The tricky part is finding the drivers for the unit once xp is installed. Some drivers will auto detect aside from video, sound & network adapters. Some times other drivers are missing as well.

If your not comfortable with this process, just bring it in to a pro. Geek Squad charges $129 for this process.

Jun 19, 2008 | Computers & Internet

Not finding what you are looking for?
Abit AN8 32X Motherboard Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

David
David

Level 3 Expert

781 Answers

Rommel Balcita

Level 3 Expert

749 Answers

Are you an Abit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...