Question about Bell Lands Phones

2 Answers

My CYBIOLINK 8000 does not show the caller ID after a power outage. I had outages before, but it worked fine when power got on. I reset it, but no luck. It does show who called when I use the caller button. My other phones work well.

Posted by on

  • amanomt Sep 04, 2009

    My CYBIOLINK 8000 is a corded phone with no satellite handsets. The others phones I mentioned are completely different ones and manufacturers. I have a feeling the circuity is screwed because I see a small black square where some letters or numbers should be in the directory and on viewed who called information.
    When I press the CALLER button and the up button while the phone is ringing, it displays the caller information.
    So maybe a new phone is in my plans.
    Thanks


  • amanomt Sep 04, 2009

    Sorry Robert,
    There is no battery in this unit. It's powered by a DC adapter. Check out a picture of it on the web.
    I love my Tim's too.


×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

These phones have re-rechargeable batteries in the base unit.. These batteries are supposed to light up the display. the display when on consumes quite a bit of wattage. i.e. when the display lights up. Under normal circumstances when a call is being received, the display stays lighted up for a min or 2. Under normal circumstances, the AC power adapter supplies the current which are stored in the batteries. After any power outages, now that the phones do not have new or fully charged. Thus the display lights up but the batteries get discharged very quickly and therefore not able to display all the info. Its time you replaced these batteries on all similar phones..................sodeep

Posted on Sep 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Unplug the base for about 15 minutes.

put each phone in the base one at a time. observe the power light, it should flicker. repeat that step with each phone you have.

the phone must be initally place in the base not the spare charging cradles.

please rate this solution or if you have further questions don't hesitate to ask


robert

Posted on Sep 03, 2009

  • Roberta Smith
    Roberta Smith Sep 04, 2009

    you could also try removing the battery from the headset for the same length of time to reset it.

  • Roberta Smith
    Roberta Smith Sep 04, 2009

    keep in mind then that when you unhook the power adaptor to reset it you must also remove the phone cable as it will get power from that.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba television won't turn on after power flicker


Free Fix For Toshiba 50" TV That Will Not Turn On. - YouTube

? 2:20
https://www.youtube.com/watch?v=8-0nQ57Bvow
Mar 21, 2012 - Uploaded by rstarre ten g
My flat screen tv cuts off and on while the power but is on what should i try before i buy a new one .... I have a ...

Toshiba TV power outage - AllExperts

en.allexperts.com > ... > TV/VCR/Stereo Troubleshooting
Feb 3, 2011 - TV/VCR/Stereo Troubleshooting/Toshiba TV power outage - no power... we had a power outage (they're calling rolling blackouts due to power grid ... but I admit I'm now afraid to turn it off for fear it won't come back on again.

Toshiba 32c120u LCD TV won't turn on - Tom's Guide

www.tomsguide.com/answers/id.../toshiba-32c120u-lcd-turn.html
May 27, 2015 - My toshiba tv is flashing but won't turn on with remote or power botton on tv itself ... dang this worked for me but after a minute it stoped working.

Dec 28, 2015 | Toshiba 58L7350U 58" 3D 1080p LED-LCD TV -...

1 Answer

Model RB215LABP reset temperature display after power outage


Samsung Blinking Dash/Line Error Code List - Parts Dr

https://partsdr.com/blog/samsung-blinking-dashline-error-code-list/
Jul 16, 2011 - Indicate Error when the temperature sensed by Refrigerator sensor is .... My model required holding the super freeze and super cool buttons, but it worked! ... My display said S and E after a power outage I pressed energy .... I had that 5 E error code after a brief power outage... thank you for the resetting ...

Samsung Refrigerator Troubleshooting Self Diagnostics ...

www.appliancerepairlesson.com/.../samsung-refrigerator-troubleshooting...
Apr 13, 2011 - and then I also noticed that the display buttons for the temperature is not working. ..... We have tried to reset the refrigerator with no luck. ..... I had a power outage yesterday and my Samsung Fridge RSG257 now shows an 88 .... I haveModel# RF268ABRS, this thing quit cooling/freezing after we lost power.

Error Codes / Messages / Blinking


Dec 22, 2015 | Samsung Refrigerators

1 Answer

Uniden D1680-2: After a 24-hr power outage, it now says "searching"


Move your phone closer to base ... that is what I did with my Uniden and it resolved itself

Sep 07, 2012 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

VCR will not show picture or menu on TV after power outage.


Hate to say this, but when power outages occur, things like vcr's are the first thing to fry. But if you feel that the vcr is fine as far as powering up, then unplug it from the wall socket for 30 minutes or so, plug back in and see results.

Apr 13, 2010 | Televison & Video

1 Answer

I had a power outage in my neighborhood the other day and ever since then my wii isnt turning on. what my be the problem?


Whenever I have a really bad thunderstorm that ends up in a power outage my wii does the exact same thing...

I don't know what the cause is but what you should do is just unplug it for about 12 hours (about how long i leave it unplugged everytime), plug it back in and if it is the same problem as I have it should work fine (until another power outage...)

BUT if it still doesnt power up leave it unplugged for another 6 hours, after that if it still wont turn on id call nintendo and find out what the problem is...

Jan 25, 2010 | Nintendo Wii Console

2 Answers

AT&T 974 Caller ID has quit.


Unplug everything then replug should reset the Caller ID

Dec 11, 2009 | AT&T ATT-974 Corded Phone

1 Answer

Model 25942EJ3-C


Try this:
1.) Make sure the answering system is on.
2.) Press flash/answerer/call waiting button on the handset to enter answerer remote mode.
3.) Press key (8) to enter Time/Day set menu using the handset.
4.) To set the Hour, key in (00)-(12), like 08 for 8 o'clock.
5.) To set Minutes, key in (00)-(59), like 15 for 15 minutes after the hour.
6.) To set AM/PM, press the CALLER ID-VOLUME up or down buttons.
7.) To set the day of the week, press the CALLER ID-VOLUME up or down buttons.
8.) Press #PAUSE/ringer button to confirm the setting.

Hope this helps you out! Hal

Apr 16, 2009 | GE 26938GE1 Cordless Phone

1 Answer

No burner/oven heating after house power outage.


try reseting the clock as lots of ovens will not work untill clock is set

Jan 19, 2009 | Amana AER5515QA Electric Kitchen Range

1 Answer

Lost power for one second and now cannot get my caller ID to work


unplug the telephone cable from the back of the receiver and plug it a basic telephone to check if there is a dial tone. if there is a dial tone restart the receiver without the the telephone line plugged in. after it loads and u have a picture, plug in the telephone line. call the home to check. if its not working the modem in the receiver has gone bad.

Oct 20, 2008 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

ATT 5840 answering machine


you need to reset the cordless phone. This sounds like a lightning strike , if it was the phone is finished. Unplug it , wait 20 seconds and plug it back in again.

Oct 18, 2007 | AT&T 5840 5.8GHz...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bell Lands Phones Experts

bill tarkulich

Level 1 Expert

33 Answers

RobertFonner
RobertFonner

Level 2 Expert

67 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Bell Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...