Question about Emerson LC320EM9 32 in. LCD HDTV

2 Answers

My flat screen tv does not have a picture or sound. The stand by red button is on once we press the power button the picture will come on with a message that reads digital television for about a second or two then it will shut off leaving the red stand by button on. TV is an Emerson 32" digitalanalog lcd tv. thank you.

Posted by on

  • Robin Chaney Dec 20, 2012

    I have a 40 inch Emerson flat screen got at Walmart last year at the black friday sale we had

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

I've had the same problem with a 32" model LC320EM82S. All the Emerson TV ( no matter what size ) are having the same issue.
I'm sure with your TV, the green light is blinking before the TV automatically turns OFF. Basically, the TV is trying to power up the screen and has failed. Protection mode turns the TV OFF to prevent other parts from being damaged inside.
My solution for fixing my TV was replacing one bad inverter transformer of six on the Backlight Inverter/Power Board. Here is what my board looks like: my flat screen tv does not have a picture or - 767c946.jpg
You can see the six inverter transformer on the bottom of the board. It's what supplies power to the screen. Your board may look similar. You can sometimes find a whole replacement board over the internet for a good price. Shopjimmy.com is a good place to start. Just start searching by your TV model number.
If you have some electronic experience, you can repair the board itself by finding a Service Manual over the internet for less than $20. It will have all the part numbers, schematics, and diagrams you need. I would investigate the inverter transformer for your problem.
I hope I helped you out with your problem.

Posted on Sep 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My 32 'flatscreen emerson tv will not do anything, the fuse blew so I replaced it ,and that one blew.. can you tell me where the reset button is or if it has one?

Posted on Sep 30, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv has sound but no picture, nothing shows with the flashlight test, all inputs have sound but no picture, installed a new t-con card with no results ?


Use a voltmeter to verify the different voltages on the power supply board are present within tolerance. Look for discolored , puffy or domed capacitors. Repair kits and complete replacement boards can be had from: TV Parts Universal TV Stands DLP Chips ShopJimmy

Feb 17, 2016 | LG Televison & Video

1 Answer

What is stand by button for


It is for put the set to standby. If you press it, the set will stop working, but it will be still alive. When you press Power button on the remote control, the set will come alive. OK?

Apr 19, 2015 | Televison & Video

1 Answer

BUSH 42" plasma no picture or sound?


You have a power supply problem, replace the Module.
What you ear is a click relay No juice to activate the relay
Some cups may be dried.

Nov 01, 2012 | Bush Furniture Bush My Space Rhea 42 in....

1 Answer

Plasma Hyundai 42'' TV ,NO SOUND OR PICTURE


most times then not it's the capacitors on your power board that blew there for not supplying the tv with enough power if you open it up and check the capacitors it should be leaking some kind of liquid or the tops have bubbled up. its an easy fix cost>>2 dollars each

May 21, 2009 | Televison & Video

1 Answer

No power


If you have an external power supply check it with a voltmeter
Is the red stand by light on?
yes, but no pictures ,no sounds you will need to be a good techies to fix it.
No , open the back and check the fuse close to the connector from the power supply cable.
cheeers

May 15, 2009 | Akai CFT2490 24" TV

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

TV will not turn on from Stand By mode


if you are comfortable taking the back cover off, do it and visually inspect a cylindrical shaped components on the power supply unit... if you can send a picture please do s69joe@hotmail.com

Dec 08, 2008 | Akai LCT2715 27 in. LCD Television

3 Answers

No picture, no sound.


Hi i have a pilips 42" plasma tv (42PF5320/79) i can hear clicking the green light is on and the tv will go into stand by if i press the power button and the red light also comes on .I have turned it on and off and it works now nothing just the light on the front as if its working looking at the back through the slots two green lights come on then the tv clicks and they turn off,thanks

Aug 06, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

No picture on TV with powerlight on


If you press the power button *on* your TV (rather than using the RC), does the power light still stay on red rather than turn green?

Jan 05, 2008 | Televison & Video

Not finding what you are looking for?
Emerson LC320EM9 32 in. LCD HDTV Logo

1,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...