Question about Veo Observer Network Camera

2 Answers

Not able to run, get error Veonetcam Active X control V2.063 download failed

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That happens to me also. This is because the valid date for the security certificate is too old. Check the details for the error message & you should see a link to let you view the certificate. Look for the valid date for the certificate. In our case it's 8/20/2002-8/21/2003. Change your system's date (just the year is all that's necessary) so that it falls in that range & try again. Once the ActiveX control is downloaded you can change the system date back to the current date.

Posted on Sep 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Veo Master
  • 10,322 Answers

1st You download Webcam Driver.
download Camera After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Veo Camera Drivers for Windows XP Vista Windows 7

Posted on Feb 20, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2009 g envoy and when I turn my key it wont do anything.replaced the ignition switch and it has worked fine for about 5 months and now it is doing the same thing sometimes it will start right


On GM vehicles starting back in mid 2000's , maybe even before that. They started using inputs to the body control module from the ignition switch, from there the BCM controls all vehicle systems .
Power Mode Description and Operation
Serial Data Power Mode
On vehicles that have several control modules connected by serial data circuits, one module is the power mode master (PMM). On this vehicle the PMM is the body control module (BCM). The BCM uses 3 signals from the ignition switch. These are the Ignition 0, Ignition 1, and Accessory.
To determine the correct power mode the BCM uses:
?€¢
The state of these signals


?€¢
The sequence of switch closures received by the BCM


?€¢
The status of the engine run flag

The chart indicates the power modes detected and transmitted by the BCM:

Correct Ignition Switch Inputs
Ignition Key Position

Power Mode Parameter

Engine Running

Sampled Ignition Signal State

Accessory

Ignition 1

Ignition 0
OFF
Off-Awake or RAP
No
Inactive
Off
Off
UNLOCK
Unlock or RAP Unlock
No
Inactive
Off
On
ACC
Accessory
No
Active
Off
On
ON
Run
No
Active
On
On
START
Crank
No
Inactive
On
On
ON
Run
Yes
Active
On
On
Fail-safe Operation
Since the operation of the vehicle systems depends on the power mode, there is a fail-safe plan in place should the body control module (BCM) fail to send a power mode message. The fail-safe plan covers modules with discrete ignition signal inputs as well as those modules using exclusively serial data control of power mode.
Serial Data Messages The modules that depend exclusively on serial data messages for power modes stay in the state dictated by the last valid BCM message until they receive the engine status from the powertrain control module (PCM). If the BCM fails, the modules monitor the serial data circuit for the engine run flag serial data. If the engine run flag serial data is true, indicating that the engine is running, the modules fail-safe to Run. In this state the modules and their subsystems can support all operator requirements. If the engine run flag serial data is false, indicating that the engine is not running, the modules fail-safe to OFF-AWAKE. In this state the modules are constantly checking for a change status message on the serial data circuits and can respond to both local inputs and serial data inputs from other modules on the vehicle.
Discrete Ignition Signals Those modules that have discrete ignition signal inputs also remain in the state dictated by the last valid BCM message received on the serial data circuits. They then check the state of their discrete ignition input to determine the current valid state. If the discrete ignition input is active, B+, the modules will fail-safe to the RUN power mode. If the discrete ignition input is not active, open or 0 voltage, the modules will fail-safe to OFF-AWAKE. In this state the modules are constantly checking for a change status message on the serial data circuits and can respond to both local inputs and serial data inputs from other modules on the vehicle.
You would need a scan tool that can read data from the BCM . What may be the problem is a lose connector , these pin's at connectors are tiny and doesn't take much for one to become lose.

Jan 16, 2015 | 2009 GMC Envoy

1 Answer

My pictures are not being backed up. Memeo gives message stating failed to back-up. Error (9) is displayed


Failed backups can usually be traced to your antivirus running in the backgound. if you have any active antivirus and spyware detection running then stop them before you backup. Should work ok then.

Aug 29, 2011 | Seagate 500GB FreeAgent GoFlex Hard Drive

1 Answer

VeoNetCam ActiveX Control v2.063 download failed!!


You may find some useful information here

http://dmitrybrant.com/2008/03/20/reviving-the-veo-observer

Aug 05, 2010 | Veo Observer Network Camera

1 Answer

My computer fails to download active x. I keep


Go to tools>internet options>Security>Custom level in IE and select enable option for "download signed active x controls" will solve your problem.

Revert back for more clarifications or assistance required.

Dec 15, 2009 | Adobe Photoshop 7.0 for PC

1 Answer

Local machine: installation failed Installation: Error: Action failed for file avgrkx86.sys: starting service.... Error 0x8007001f


This means the the download was not fine. You must fiirst install from Control Panel->Add remove programs.
Then run the AVG initial downloaded program and redownload the main installation file and install it.

Nov 15, 2009 | RTO Avg AVG Anti-Virus Edition V8.0 WIN -...

1 Answer

Error message (Run-time error '0')


If you are the one that is installing Active X as a part of a program, then it is safe to continue. It is just a warning so that no one else put in Active X willy nilly. (potential for trojans and the like)
Go ahead and install Active X for QuickBooks, it will be fine.
Hope this helps, please leave rating, thank you

May 06, 2009 | Intuit QuickBooks Pro 2007 Full Version...

1 Answer

Install MS office home and student 2007


Reboot

Shut down any active protection software such any antivirus, antispyware, antitrojan, or registry monitoring software.

Try to Unistall by using the install disk. It should detect a previous installation and ask if you want to Install, Repair, or Uninstall.

If that fails, download and run CCleaner - Use the Cleaner and Regisrty modules default settings
http://www.ccleaner.com/

Reboot, and shut down active protection software.

Download and run Windows Installer CleanUp Utility.
http://support.microsoft.com/KB/290301
Remove the applicable entries.

Reboot, and shut down active protection software.

Reinstall

Hope this helps - good luck!

Nov 01, 2008 | 10 10 Computer Network adapter Cable...

2 Answers

Adobe Flash Player Download


When you click the yellow bar to allow the active x install/control
the page may not refresh, try hitting F5 or the refresh button. or click back and then click forward
Or just download Firefox for free as it most always works.
visit their main page to get the media downloads for it.
.

Jan 31, 2008 | Microsoft Windows XP Home Edition

5 Answers

Adobe Flash Player Free Download


Try autopatcher XP. go to autopatcher.com, download and install it. Run it. You'll find flash player for common browsers. Install the patches and you're done!

Jan 31, 2008 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Veo Observer Network Camera Logo

777 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Computers & Internet Experts

micky dee

Level 3 Expert

2841 Answers

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Veo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...