Question about Senco Tools & Hardware - Others

1 Answer

The Senco SFN-1 gun will drive one nail and then not retract

The gun will drive one nail and then the driver pin will not retract back up in the gun.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 548 Answers

Sounds like time for a rebuild i do this once a year on all of my guns i buy a seal kit and replace them at that time and oil the interior oparts and check for worn or broken parts

Posted on Sep 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My senco frame nail gun isn`t working


First get an exploded view of gun and parts list and numbers from senco.com,,take nail gun apart,,,take a good look at the rubber bumper stop to see if it is broken,,look at the driver nut to see if it is tight,,,,you can go to juldan.com once you have gotten a list of the worn parts,,,juldan sells complete o ring kits along with nearly all parts needed for your repair

Jan 18, 2013 | Senco Air Tools & Compressors

1 Answer

Senco fram pro 602 nail gun firers but no nail just a hole from firing pin


First, check that you are using the proper nails. The FP602 needs Full Round Head nails with plastic collation. If you are using Clipped Head nails with the paper tape collation the angle of the nails not let the driver catch the next nail and drive it into your work.
If you have the correct nails, check the magazine to make sure the nails are feeding all the way up to the driver. If there is anything blocking the way or if the spring on the feeder isn't taught enough to pull the clip all the way up the driver won't be able to catch the next nail and drive it in.

May 05, 2012 | Senco Tools & Hardware - Others

2 Answers

Senco nail gun sfn30 is only firing every second nail in


You have damaged o-rings in the gun. Remove the head cap & valve assembly, remove the ring on top of the cylinder, remove the cylinder & piston. The cylinder is in tight so work it out carefully. Check the condition of the following: a split flat ring with a rubber o-ring under it on the top of the piston and two o-rings on the outside of the cylinder. If these are damaged air will leak around the piston instead of pushing it back up. The inside of the gun should be clean with a light coat of oil on everything if you are oiling it properly before use. Dirt in the gun means the gun is being laid on the ground without the air hose attached. Dry innards means no or not enough oil is being put in the gun before use. Oil pooled in the bottom of the gun means too much oil is being used. Senco doesn't make a rebuild kit for this gun, you'll have to go to the Senco website http://www.senco.com/ or other website like http://www.ereplacementparts.com to get a parts breakdown of your gun and order the o-rings (any part beginning with LB) individually. If you replace one, replace all of them and grease them up liberally when reassembling the gun.

Jan 29, 2012 | Senco Tools & Hardware - Others

1 Answer

My Senco SFN1 finish nailer will not shoot a nail. When the trigger is pulled air comes out but no nail is shot. Thanks,Steve L


Not sure about Senco but most have latch you can open to expose firing mechanism. Nail sometimes gets jammed and will not allow driver to fire or if not nail push driver ****** all the way back into gun then see if gun will fire.

Oct 25, 2010 | Senco 2D0001N FinishPro2N1, 18 Gauge Brad...

1 Answer

I have a senco framepro 600 clipped head nailer. Nails are only driven 2/3 of the way down. This occurs about 30 percent of the time. The portruding nail will be bent over against the wood. Air pressure...


The Senco FP600 is an older model gun, if it has been getting reguar use check the driver. After a lot of nails the tips tend to get rounded off towards the back side and if the nail hits some dense wood or a knot the head will slip off before it can be driven home. Replace the driver if so, trying to grind the end square will only result in problems with the guide when the driver retracts into the head.

Oct 25, 2010 | Senco SCN56 Medium Coil Nailer, Switchable...

1 Answer

Senco finish nailer not firing nails


firing pin called the driver is probably broken or needs new seals max air pressure 125 psi senco sells repair kits

May 13, 2009 | Tools & Hardware - Others

1 Answer

After each shot the nail gun jams


hi visit your supplier and ask for a overhaul kit once fitted your tool will be licke new
best of look ian

Mar 25, 2009 | Senco FP620 Framepro 602 2" - 3 - 1/2"...

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

808 people viewed this question

Ask a Question

Usually answered in minutes!

Top Senco Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1388 Answers

yoopertech

Level 2 Expert

131 Answers

John Bowen

Level 2 Expert

341 Answers

Are you a Senco Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...