COPIER MY COPIER JUST STARTED MAKING A WEIRD SOUND AND THEN "IMAGE CYCLE" POPS UP WHAT DOES IMAGE CYCLE MEAN?????

This is a scheduled maintenance programmed into all of these machines. It pops up when the machine crosses a certain "milage." If your machine is still making nice copies and prints it's nothing to worry about.


Copier Collin Houston TX Copier and Imaging Expert

Possibly a foreign item like small change or a piece of metal from an article of clothing, pocket?

maybe greese the bearings

If you would like to reverse an image--by reverse, I assume you mean flip horizontally--then you will need an image editor.
GIMP 2.0 is a powerful editor that you can get much more use from with t-shirt making. Download GIMP, select your image, right click and select flip horizontally.
Additionally, some operating systems will allow you to right click the image and select "flip horizontally" or "reverse".

It sounds like the color wheel has failed and will need to be replaced. I would recommend calling a technician to do this job. You can call 1-800-samsung to find the nearest service center.

i had exactly the same problem today with my a200, was is like a jammed sort of sound? like a drilling sound almost :S
im so annoyed. why is this happening?

fuser roller gear is cracked... or a spring holding the bypass is loose

Whatever you do, DO NOT PUT OIL ANYWHERE ON THE COPIER!!!

The rollers are wearing out; you will have to call Canon to send a tech, or, if you are a qualified Canon Tech or have one in your office, have them look at it and order the necessary parts.

Sounds like the water may not be turned on to the dish washer.
The arm spins with water pressure

LE stands for a locked motor. If the motor has gone it has to be replaced. In some case though, depending on the age of your unit, it could be a broken wire in the door. If you remove your front panel (6 screws) you can have a look, but turn off the power first. Alternatively you can call for a service call.

With the noise, it could also be that your unit has been siphoning and as a result the motor has burnt out. The proper water level for these unit is the water should be up to the second rim on the inside of the cabinet.

Sgt 48