Normally this happens when the camera is dropped or dashed roughly..the screen gets the power but the display connections break off internally .so it illuminates but does not display anything.
Also the second possibility is that the moisture has shortened the connections.
To check it ,initially try removing battery and reinsert and check whether its just a rest problem. if it still has problem then the only solution is to replace the lcd of camera.
thanks,keep updated and accept the solution.
I have a Elura 100 Camcorder and have upgraded the 256MB sd card to a 2GB sd card , however, I can...
(More)
I have a Elura 100 Camcorder and have upgraded the 256MB sd card to a 2GB sd card , however, I can copy from cassete to card and play on the camcorder, however when the card is placed in a pc it will not play and shows nothing
sometimes when I put a tape in, it just starts racing and it says "remove cassette"....
(More)
sometimes when I put a tape in, it just starts racing and it says "remove cassette". Anything I can do?
My Elura 100 only boots to ''CANON'' blue screen in camera mode. It seems to boot ok in play mode....
(More)
My Elura 100 only boots to ''CANON'' blue screen in camera mode. It seems to boot ok in play mode. When it hangs at blue screen it won't power off and I have to remove the battery. Can I take it apart and look for something specific?