Question about Microsoft PS-II Intelli Mouse MSMIINT Keyboard

1 Answer

Keyboard & mouse not working

Dear sir

i have a SIS motherboard P4 , MY PROBLEM IS THAT WHEN I SWITCH ON MY COMPUTER KEYBOARD & MOUSE NOT WORKING AND THERE IS A MESSAGE APPEAR ON THE MONITORE "COMS ERROR"
I TRY TO USE AN USP KEYBOARD BUT NO CHANGE

Posted by on

  • 1 more comment 
  • DARKBOY_KSA Dec 07, 2007

    dear sir



    Thanks for helping but iam sure that the keyboard and mouse at the right place the problem is from the motherboard itself

  • DARKBOY_KSA Dec 09, 2007

    Dear sir,

    thanks for helping but the problem is the keyboard not working so how can i enter the bios setup

  • crispuntel May 01, 2008

    mikomi wireless mouse S/N:0006950

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Sounds like you have the keyboard and mouse in the wrong port switch them around.

Posted on Dec 07, 2007

  • 1 more comment 
  • Cary Farah
    Cary Farah Dec 08, 2007

    go into the bios when the computer first boots, most of the time it's press f2 to get in, check to see what the com ports are set at if you have an auto setting use that
    let me know what kind of bios you have so i can help you more, some have where you can reset to factory settings you can try that also.

  • Cary Farah
    Cary Farah Dec 08, 2007

    i give you some help at least i tired, give me a Inappropriate gee at least i tried to help u

  • Cary Farah
    Cary Farah Dec 10, 2007

    well if you have tried both ports with just the keyboard abd you get an error you can try reseting the bios if there is a reset on the board it would be a jumper you would have to move or remove the battery if it has one with out that your sol.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My led and keyboard and mouse light up when I turn on power switch, nothing happens when I push start button. My e-mail address is debandeddy@yahoo.com


first shut down you computer remove the covers of the cpu then locate the memory and remove them wipe them clean with clean cloth and switch the computer on with out the memory and see if you hear any beeps if you hear beeps insert the memory and switch on the computer if still no beeps then remove the processor fan and clean the surface of the processor fan and the processor apply a thin layer heatsink solvent and clip the processor fan tighty to the socket

Sep 14, 2010 | ASUS P4VP- MX VIA P4M266A UATX P4/...

1 Answer

I purchased a new motherboard Jetway LGA775.... keyboard and mouse do not work. How do I make them work?


The motherboard does not have the drivers installed and that is why they are not working. If you have the cd's for them, try booting pc with the cd's already installed. They should have auto-detected them. If you have a schematic of the motherboard, check all jumpers to make sure they are set correctly.

Jul 11, 2009 | Jetway MiniQ-450 P4/ 533FSB W/ Remote,...

1 Answer

I nedd bios upgrade for my laptop clevo m220s


It seems it is a product of SiS. Visit http://www.sis.com.tw and search the BIOS upgrade in the download or support section. If SIS has launched any upgrade for your product, it will be available there. (ehteshamhusain@gmail.com)

Apr 04, 2009 | Computers & Internet

1 Answer

No display


Are all the other LED Blinking. Fans revolving, etc but no power at the keyboard or mouse(if optical), then the problem is with the keyboard or one the pins of its PS2 connector might be bent. Try a different keyboard and see if the PC boots up.............sodeep

Mar 31, 2009 | Pioneer ECS P4VMM2 V3.2A P4(478)/FSB...

2 Answers

My computer has no audio sound.


falcon_mark2,

I was going to ask you to clarify the motherboard model, but I found the link for you to download the driver which support most of the SIS audio product. Enjoy.

http://www.softwarepatch.com/utilities/sis7012.html

Jan 09, 2009 | MSI 655 Max-LS(HT Ready) P4(478)/SIS...

1 Answer

Lcd screen shows severe blurring when moved,keyboard is locked when used with PS2 port


Could be a number of things...motherboard,hard drive going bad or as simple as a virus/spyware problem. I would formatt & do a clean install of windows to illiminate any virus problems. Then if it still has this problem, look to the motherboard & hard drive.

Dec 28, 2008 | Compaq Presario 5000 PC Desktop

1 Answer

Memory card replacements in two PC-s.


Computer 1 = DDR400 Memory

Computer 2 = DDR400 Memory

Dude, next time you should try http://www.google.com

Sep 25, 2008 | Gigabyte Computers & Internet

2 Answers

SIS 651 chipset series drivers


Go to following website,

http://www.sis.com/download/

Aug 17, 2008 | Intel Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...