Question about Garmin nuvi 350 GPS Receiver

1 Answer

How to snap the ball in the window mount on garmin 350 gps

How does the ball snap in it seems to small to fit

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers
Re: how to snap the ball in the window mount on garmin...

It takes quite a bit of effort to get the ball into the socket on the cradle in the first instance. On pg 57 of the Owner's Manual it describes and has a picture of Removing The Cradle from the Mount by turning it to one side and states "To replace the cradle, snap the cradle on the ball socket." It seems to be easier if you also turn to cradle to one side to snap the ball in - at least such is the case with mine.

Posted on Dec 07, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Remove mount on gps

Ball and socket snaps in and out with a bit of force.

Oct 23, 2014 | Garmin nuvi 42 - GPS receiver

1 Answer

I can't figure out how the two pieces of the window mount fit together. Do you have an illustration of how it assembles?


The arm of the Garmin G-Ball Suction Mount snaps into the back of the cradle.
You can see a picture of it here.

Sep 16, 2011 | Garmin Nuvi 265W GPS Receiver

1 Answer

How do you attach the grip to the suction cup before you can mount on the windscreen

On the end of the suction cup there's a ball shape. On the grip there's a small plastic cylindrical piece. Push the ball into the cylindrical part. It's a tight fit so you'll have to push hard.

Sep 25, 2010 | Garmin nuvi 255W GPS Receiver

1 Answer

How do you attach the garmin clip on bracket to the ball of the stationary mount?

press them together firmly and quickly with the ball in the indented area, it will snap into place

Sep 03, 2010 | Garmin nuvi 205W GPS Receiver

2 Answers

How do I attach my garmin to my dash mount?

The Garmin Nuvi 255w comes with a three piece dash mounting kit. A round disk smooth on one side tape on the other to affix to the dash (most dashes ar textured and the suction cup will not hold to textures) a suction cup arm with a ball end, and a bracket with a receiver for the ball. Snap the bracket and arm together, this can take a little effort. mount the disk to your dash in a place that doesn't obstruct your view of the road. then place the arm/bracket on the disk and push the lever down creating suction to hold the mount to the dash.
Another option it the beanbag dash mounts that hold the arm without sticking to your dash.

If this answered your question please check +. If not please elaborate on your queston

Apr 26, 2010 | Garmin nuvi 255W GPS Receiver

1 Answer

Installing Garmin 350

It should be a round hole with three little notches, just stick it in and push (flat surface required!) Then there is a lever on the suction cup to **** it against the windo, just snap close that when you're sticking the hip joint into the socket!

Jun 04, 2008 | Garmin nuvi 350 GPS Receiver

1 Answer

How does teh suction cup ball fit into the garming 360

There is a seperate black clip that should have come with your gps if you purchased it new. Here is a link to Amazon to get a better idea of what I am talking about:
If you have the clip then there is a round indent in it that requires a good measure of force to attach to the suction cup mount.
Take Care,

May 06, 2008 | Garmin nuvi 350 GPS Receiver

1 Answer

Problems with the window mount that comes with the Garmin 360

You just have to push the ball part on the window mount into the socket part that holds the GPS. It's pretty tight, so you have to press pretty hard.

Apr 28, 2008 | Garmin nuvi 350 GPS Receiver

1 Answer

Garmin Nuvi 350 Traffic Receiver connection

You have to power the unit via the mount by either using the cigar charger in the car or snap off the mount from the ball and socket and power it via the mains adapter.

Jan 02, 2008 | Garmin GTM 12 FM TMC Traffic Receiver...

2 Answers

Fitting zumo 550 to ducati st4s

RAM mount (

Dec 09, 2007 | Garmin zumo 550 GPS Receiver

Not finding what you are looking for?
Garmin nuvi 350 GPS Receiver Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Devices Experts

Tom Chichester

Level 3 Expert

22393 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Bill Gilhooly
Bill Gilhooly

Level 2 Expert

94 Answers

Are you a Garmin GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides