Re: Phone ringer has turned off following a power outage.
I am assuming you have a Strata VIe system with this phone. I added a website below with all the program manuals. If you have a DK system please look at program 81 to get ringing back. I dont know the programming very well on the Strata VIE systems.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here some solutions for your problem + a link to the user manual.
**Selecting the Ring Tone and Volume Your phone has five different ringer tone/volume combinations you can choose from. To select the ringer: 1) With the phone in standby, press [vol/ / ] or [vol/ / ]. 2) The phone will sound the different ring tones at different volumes. To turn the ringer off, select RINGER OFF. 3) When the phone sounds the ring tone and volume you wish to use, press [end].
**Temporarily Mute Ringer If the handset is off the base while an incoming call is ringing, simply press [end] to mute the incoming ring. The ringer will sound with the next incoming call. Note: You can only mute the handset ringer if the handset is off the base when the phone starts ringing. Adjusting the Earpiece.
**Here is also a link to the phone manual http://www.uniden.com/pdf/EXI4561om.pdf
press menu,scroll down to ringer settings,hit select,scroll to ringer volume and hit select then press up the round button in the middle until you hear it make a "ring" sound. adjust your preferred volume and hit save.
If you have a programming manual you can change the settings on your own. If not, you will need to contact the installer or a local interconnect company that services Samsung. It seems as though the memory switch inside the ksu is turned off. If that's the case, it needs to be turned on and if not, you either have problem with the ksu or the power outage was a brownout. Sometimes a very short loss of power can cause corruptions in memory, however I seriously doubt it in this case. Your system is acting as though it's memory has been set to default.