i have a 13w7 in a ported box 2 exact jl specs hooked up to a 1000/1 and added an ole school klw audio phantom bass processer to it,with the bass down and the phantom knob on heavy it sounds like thunder but i get a funky burning smell,WTF is goin on?
Could be a range of things, a capacitor drying out, dust burning off, its hard to define without knowing exactly what the smell is. Ensure its as well ventilated as possible and keep a close eye on it.
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
thanks,im just hoping its not the sub its brand new! I was thinkin it could be the box,its new also from AV PRIORITY,solid box maybe just a break in
" - l_miller36
Hi there, I have rubicon 204 amp., it starts after 30 min when I turn on him and works erratic (1...
(More)
Hi there, I have rubicon 204 amp., it starts after 30 min when I turn on him and works erratic (1 sec works 2 sec doesn't work, etc...). Power led is on, as have to be. Sometimes works OK. So, where the problem is ?
ok....my amp had a couple parts that were fried...(a couple capacitors and two of those chip looking...
(More)
ok....my amp had a couple parts that were fried...(a couple capacitors and two of those chip looking things. i forgot what they r called.) anyways I was told by some tech that as long as the part num (ex. RFP50N06...which is the actual num.) are the same, the new chip would work. The amp still does not work. now the old chip has the serial num on top of another num...( H9 ) now the new chips i bought has the serial num (mentioned above RFP....etc)below another code that shows " F 1G23SF. now does that make a diff, n if it does...where can I buy the actual "chip" or resistor or whatever it is called
My amp will just go into protect mode then.I unhook the amp and then hook it back up and it works...
(More)
My amp will just go into protect mode then.I unhook the amp and then hook it back up and it works fine for a while.
I just need to find the pcb mounted inputs for the 12Vdc, Remote, and ground for the JL Audio...
(More)
I just need to find the pcb mounted inputs for the 12Vdc, Remote, and ground for the JL Audio 1000/1. Where can I purchase this part at?