Question about Televison & Video

1 Answer

Cannot move the blue conversion

I have a 52' quasar sr-5144e big screen and there is a blue tint around the picture. I tried to align the conversion but the blue will only move up and down not side to side. Any ideas on whats wrong or how to fix it? Thanx

Posted by on

  • Exio Jan 21, 2008

    Hello, I'm having the same problem... I'm using a Toshiba TheaterView 50".

    I believe you've got the solution pretty much spot-on, but I don't really know how to approach the fix. Do you mind me asking what an IC is? Additionally, is there anything I should go about looking into before repairing myself? I have somewhat of an electrical background, especially with computers.

    Thank You,

    Chris

  • Anonymous Nov 30, 2008

    akai pt 5250

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

You got a problem in horizontal alignment in blue. The IC could be defective, or if you allready replaced it you have some resistors burned in circuit. Check all resistors (should be small values 0.4-3.9 ohms and more then 0.5W) It's not big deal. You can fix it easy.

Posted on Dec 06, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a Quasar SP-3235 32" TV. It has a slight green tint after 10 years of use. How can I adjust the color screens on this set? Is it a function of the remote like Sony TVs or do I need to remove


I would open it first and look, a lot of those had both the screen and drive controls on the PCB at the end of the picture tube, at least look there first.

You are dead on in looking for the screen controls, if you find one it should only be a tiny adjustment due to age and the Crt changing a bit.

Dec 13, 2012 | Quasar SP-3235 32" TV

1 Answer

Tv out of foucs


These procedures are from the owners manual, go into menu and then picture quality and then: Convergence The Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’ images are precisely aligned, they create the color images you see on the screen. Over time, the picture can drift out of alignment (this is normal). If your picture seems fuzzy or has a yellow tint, using Convergence could correct this misalignment. Only one convergence is needed for all inputs, regardless of the signal format. Note: Make sure the TV has been on for at least 30 minutes (TV needs to warm up for best results) before starting Auto Converge or Red/Blue Centering. When you select the Convergence feature, a submenu appears with three options: Auto Converge Automatically aligns the projection lenses to self-correct color images. You’ll see flashing squares of color dance across the screen (this is normal). Note: After performing auto convergence, use the Blue Centering and Red Centering menus to fine tune convergence in the center of the screen, if necessary. Blue Centering Aligns the blue and green images to fine-tune the picture. Red Centering Aligns the red and green images to fine-tune the picture. Note: The ability to change channels is disabled when adjusting the convergence options. The TV must be tuned to a usable signal to converge the picture.

Apr 23, 2010 | RCA HD52W58 52" TV

1 Answer

My RCA big screen picture messed up after one of my children fell nto screen?? How can I fix this


The picture on my 52 inch RCA Projection television has green, red and blue squiggly lines around the objects on the screen and the picture looks 3-D.

Oct 30, 2009 | RCA P52960 52" Rear Projection Television

2 Answers

Big screen TV corners of tv blue and red


I HAVE A 57" TOSHIBA REAR PROJECTION TV. HALF THE SCREEN HAS A BLUE TINT AND THE OTHER HALF IS CLEAR.

Jan 19, 2009 | Televison & Video

1 Answer

Converge off a little and screen has green tint


If you have the remote, go to the setup screen and move the picture. Converge has nothing to do with where the picture sits but, where the red, blue & green dots land. All you should see are pure white dots. There should be absolutely NO color ghost anywhere on the screen. If so, you need a bar / dot generator to set the convergence to center the dots.

Jan 12, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Picture Color



http://www.partstore.com/ModelDetai...close=1&exact=1

What do you think "CRT ASSY, Projection: Blue" might be?

CRT ASSY, PROJECTION: BLUE
RCA Part Number: 258486
RCA Model: D52W20
52" CRT BLUE P16LTG00BMB, DELTA 250

They want $183,

Jan 08, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Blue tint screen in video mode


· http://esupport.sony.com/perl/news-item.pl?news_id=24
· Which models are affected with the "flicker" problem?
A1: There are 12 models in total: KDP57XBR2, KDP65XBR2, KP46WT500, KP51HW40, KP51WS500, KP57HW40, KP57WS500, KP57WV600, KP57WV700, KP65WS500, KP65WV600 and KP65WV700.

Jan 05, 2008 | Sony KP-57HW40 57" Rear Projection...

1 Answer

Quazar 52' blue conversion doesnt move side to side


its your convergance amps,they have gone yes you can repair yourself if you have soildering iron, the shop will charge you around £100-£150 to do it, where as the amps are only about £15 each. the amps are black boxes with about 18 legs on them ,just look at the part number on them and seach through google to find the cheapest ones

Dec 06, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5344 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...