Question about HP PSC 750 All-In-One InkJet Printer

1 Answer

Error message Alignment

I have installed new replacement cartridges and I was first of all getting an alignment error message. I ran the clean cartridges programme and now I am getting incorrect black cartridges error message Please help. I know the cartridges are replacements but this is the first time I have had any problem. The printer did however stop mid print when the old cartridges were in telling me they needed replacing, could this be why? many  Thanks.

After replacing black cartridge, keep getting "press enter to align cartridge" error message. Pressed enter, it printed align page, same error message.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • HP Master
  • 1,113 Answers
Re: Error message Alignment

There is no doubt in my mind it Will be the cartridges you are using, alignment will continue to be requested if print out is missing bits do yourself a favour and use HP gen., not trying to plug HP just telling you the facts

Posted on Dec 08, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I ran out of ink and replaced my cartridges. When I tried printing the alignment, it printed the alignment, then gave me the error message of ERROR 2200 and also says "Alignment problem. Remove tape...

Try cleaning the Gold section of the cartridges with a wet paper towel.

Unplug the printer and clean the gold contacts on the printer where the cartridge meets up to the printer with a wet paper towel. Do this till the towels come back clean.

Dry both the contacts on printer and cartridges.

Allow at least 30 mins for the printer to dry.

Plug the printer back in and reinstall the cartridges.

Align the cartridges,

Hope this helps.


Mar 11, 2011 | Dell 926 All-In-One InkJet Printer

1 Answer

I installed a new cartridge and I keep getting an error message to remove the tape, which I did before the install. The alignment test fails.

Printer normally does the alignment printing whenever you do something on the cartridges (removing, reseating or replacing). Try to remove the cartridges from the printer. Clean the nozzles using a damp paper towel, if necessary. Close the cover. Unplug the printer from the power source. Plug it back in after 10-15 seconds. When it's ready, insert the cartridges. Let the printer print the alignment page again. Let it finish the whole page without cancelling it.
Check if the problem persists.

Apr 01, 2010 | Lexmark X5470 All-In-One InkJet Printer

2 Answers

Keep getting replace yellow ink cartridge error message


Where did you get the error message on printer or computer?

If you get the message on printer remove all cartridges and reinsert the cartridges and align the ink cartridges. If the alignment page prints successfully then the problem is resolved.

If you get the message on the computer disconnect the usb from computer. uninstall the software and reinstall the full feature software by selecting connect USB later.

May 23, 2009 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Color cartridge stopped working.

Try cleaning the contacts on both the ink cartridge and the carriage with a cotton swab dipped in alcohol. If that does not work, the nozzles on the color ink cartridge may be clogged with dry ink.

There is a nozzle cleaning utility in the Lexmark Solutions Center. Use that to clean the nozzles of your ink cartridges. The Lexmark Solutions Center is installed on your computer. You can find it in the Windows Start Menu under "All Programs" in a folder marked "Lexmark".

If your printer has been sitting without use for more than a few weeks, the nozzles may be too clogged with dry ink to clean by conventional means.

It nothing works, replace the color ink cartridge.

Apr 09, 2009 | Lexmark X6170 All-In-One InkJet Printer

2 Answers


go to properties on the printer, maintenance, and align the cartridges from there

Oct 26, 2008 | Printers & Copiers

1 Answer

Dell 966 all in one printer

when you replaced the cartridge you didn't ran a page Alignment go to control panel
printer options
go to properties and
run a page Alignment

Jun 05, 2008 | Dell Printers & Copiers

1 Answer

Hp psc 1610 alignment error

replace the colour cartridge aLSO AS IT NEEDS some specific colour to start this allignment and to complete but the colour is not getting printed so this error.
remove the cartridges from the printer.unplug the printer for some time.then again ON it and insert the cartridges and try .
sometimes it helps.

Jun 02, 2008 | HP PSC 1610v All-in-One Printer

9 Answers

Press Enter to Align Cartridges

Press and hold " setup" button then press " option "  will skiip alignment

Sep 22, 2007 | HP PSC 2210 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 750 All-In-One InkJet Printer Logo

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

94198 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides