I have already replaced both the "pinch" tubes for the pumps but the test strips still wont show any change when the machine goes into rince the sanitizer is pumped up into the machine. I have also checked the inlet elbow it is clear, but once the machine hits the 10 sec rinse and goes off no change
The machine shuts off as it is filling. This is a randomly occurring problem. We will use the...
(More)
The machine shuts off as it is filling. This is a randomly occurring problem. We will use the machine for awhile and then it acts up.
hobart lx18 no power to detergent pump, during the wash cycle there is no power present at the...
(More)
hobart lx18 no power to detergent pump, during the wash cycle there is no power present at the connections for the pump, during the rinse cycle the sanitizer terminal will pulse power and the rinse aid and sanitizer pumps will run, is the relay board bad? With the top drawer open and running the led for detergent never lights up during the wash cycle.
I think my machine may be programmed for the 6% hypo-chlorite sanatizing solution and my supplier...
(More)
I think my machine may be programmed for the 6% hypo-chlorite sanatizing solution and my supplier has only the 8.4% solution which would account for the stronger % of sanatizer for each cycle. How can I change the programming on the washer to reflect the 8.4% solution being used???