2003 Tiburon

this problem is a bad BCM the relay is part of the computer system and your problem is common. replace the BCM and reprogram security and you will be good to go.

Or find someone to replace the relays inside. Harder to do than you think, I change them all the ime, but not easy to find the replacements.

Sep 01, 2009 • 2003 Hyundai Tiburon

2helpful

2answers

2003 hyundia tiburon what relay controls turn signals in bcm

a relay. can't replace relay only. Must replace entire BCM

Aug 19, 2009 • 2003 Hyundai Tiburon

0helpful

1answer

When i turn my headlights on in my 2003 tiburon gt my left turn signal indicator comes on and stays on, also my back turn signal stays solid, is this from the bcm? ive seen a couple easy cheap fixes that...

dear friend-did somebody not fit a double contact globe in a single contact holder.also check and clean the earth points.

Jul 08, 2009 • 2003 Hyundai Tiburon

0helpful

1answer

Turn signal lights are staying on when key is out of ignition

This one can be tricky. Cause may be a defective hazard relay, or the BCM (Body Control Module) has an internal malfunction. You'll want to ISOLATE both of them. You cannot disconnect the hazard relay as it is an 'integral' part of the BCM. You'll need to disconnect BCM connectors BCM-CE, -FF, & -IM to verify if the problem is inside the BCM.

Since an internal short is suspected inside the BCM, verification of this is done by disconnected these connectors one-by-one and watch the results (each turnsignal lamp with go 'OFF" when its ground circuit is removed.

Apr 22, 2009 • 2003 Hyundai Tiburon

0helpful

2answers

2003 Hyundai Tiburon GT 2.7 right turn signals always 'on'

In your Tiburon, the "fuse box panel" is called a BCM, or Body Control Module. It contains all kinds of ****, including a microprocessor.

Other than paying the dealer to replace the BCM, there really not much you can do to solve the problem. I've had my BCM replaced 3 times now. Y

You can just leave the hazard fuse out, but eventually the BCM will further fail, causing all kinds of electrical problems.

Mar 24, 2009 • 2005 Hyundai Tiburon

2helpful

1answer

HOW DO I REPLACE MY TURN SIGNAL LIGHTS ON 2003 HYUNDAI TIBURON

I just found out today that it is a problem for alot of 2003 tiburons that the flasher relay for the turn signals will go out causing the turn signal lights to stay on even with the car off. The relays are internal and located on the circuit board of the BCM. In order to fix you will have to remove and disassemble the bcm circuit board from it's housing and resolder a new flasher relay. Haven't figured out where to get that flasher relay though.

Jan 19, 2009 • 2003 Hyundai Tiburon

Question 2

Anonymous

Contributor 1 Answer
Posted on Sep 02, 2009

Anonymous

Contributor

Joined: Sep 02, 2009

Answers

1

Questions

0

Helped

683

Points

2

Im sorry but Emissionwiz is wrong i had the same problem and i just took out the BCM board completely and dismantled it. I'll i had to do was desoder the relay switch and sodered in a new one the relay switch cost me 2.50. so now you dont have to replace the BCM. and questions email me at [email protected]

Answer 2

Anonymous

Contributor 1 Answer
Posted on Jan 30, 2012

Anonymous

Contributor

Joined: Jan 30, 2012

Answers

1

Questions

1

Helped

683

Points

1

With our 2003 Tiburon we have replaced the window motors driver passenger and now we are replacing the moon/sun roof motor.The turn signals stay on, the heater blower switch shorts out. My instructor says PCM and Hyundai says BCM. Which one is it and shouldn't this be a recall matter???

Answer 3

Marvin

Hyundai Master 85,242 Answers
Posted on Aug 31, 2009

Marvin

Hyundai Master

Joined: Jun 20, 2008

Answers

85242

Questions

28

Helped

29057921

Points

266281

BCM's are not repairable, they are just replaced, but it must be programmed for your car by the dealer, they come blank.

Related Topics:

Trustworthy Expert Solutions

2003 Tiburon - My turn signal stays on.

3 Answers

Anonymous

Anonymous

Marvin

Add Your Answer

Attachments: Added items

Related Questions:

I put my hazard fuse in a my right turn signal stays on but doesnt flash i push the hazard button an the left turn signal blinks but the right still stays on an doesnt blink

The turn signal lights stay on when the ignition key is removed. I removed the turn signal pod and they still stay on. I have read that it could be the hazard relay located in the BCM.

Where is the relay in the bcm

Flasher

Right turn signal light stays on front and back and will not work. lights stay on when car is not running and is draining battery

2003 hyundia tiburon what relay controls turn signals in bcm

When i turn my headlights on in my 2003 tiburon gt my left turn signal indicator comes on and stays on, also my back turn signal stays solid, is this from the bcm? ive seen a couple easy cheap fixes that...

Turn signal lights are staying on when key is out of ignition

2003 Hyundai Tiburon GT 2.7 right turn signals always 'on'

HOW DO I REPLACE MY TURN SIGNAL LIGHTS ON 2003 HYUNDAI TIBURON

Not finding what you are looking for?

I put my hazard fuse in a my right turn signal stays on but doesnt flash i push the hazard button an the left turn signal blinks but the right still stays on an doesnt blink

Ask a Question

Check Out the Latest Top Trucks Report!

Top Hyundai Experts

ZJ Limited

Thomas Perkins

Brad Brown

Are you a Hyundai Expert? Answer questions, earn points and help others

Manuals & User Guides

NOVOLOG%20-%20novo%20-%20Walter%20-%20...

. 2003 Tiburon Manual

Related Topics:

Trustworthy Expert Solutions

2003 Tiburon - My turn signal stays on.

3 Answers

Anonymous

Anonymous

Marvin

Add Your Answer

Attachments: Added items

Related Questions:

I put my hazard fuse in a my right turn signal stays on but doesnt flash i push the hazard button an the left turn signal blinks but the right still stays on an doesnt blink

The turn signal lights stay on when the ignition key is removed. I removed the turn signal pod and they still stay on. I have read that it could be the hazard relay located in the BCM.

Where is the relay in the bcm

Flasher

Right turn signal light stays on front and back and will not work. lights stay on when car is not running and is draining battery

2003 hyundia tiburon what relay controls turn signals in bcm

When i turn my headlights on in my 2003 tiburon gt my left turn signal indicator comes on and stays on, also my back turn signal stays solid, is this from the bcm? ive seen a couple easy cheap fixes that...

Turn signal lights are staying on when key is out of ignition

2003 Hyundai Tiburon GT 2.7 right turn signals always 'on'

HOW DO I REPLACE MY TURN SIGNAL LIGHTS ON 2003 HYUNDAI TIBURON

Not finding what you are looking for?

2003 Tiburon

I put my hazard fuse in a my right turn signal stays on but doesnt flash i push the hazard button an the left turn signal blinks but the right still stays on an doesnt blink

Related Topics

Ask a Question

Popular Questions

How do you reprogram a key fob for a hyundai coupe?

Engine coolant has turned to a gel and engine overheated

Airbag light is on - 2003 Tiburon

Need timing belt diagram for

Tiburon sunroof problem

Check Out the Latest Top Trucks Report!

Top Hyundai Experts

ZJ Limited

Thomas Perkins

Brad Brown

Are you a Hyundai Expert? Answer questions, earn points and help others

Manuals & User Guides

NOVOLOG%20-%20novo%20-%20Walter%20-%20...

. 2003 Tiburon Manual